BTS70041EPPXUMA1 vs BTS70021EPPXUMA1 Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng BTS70041EPPXUMA1 sa pamamagitan ng Infineon at BTS70021EPPXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Pagsanggunian na paghahambing

Parametro BTS70041EPPXUMA1 BTS70021EPPXUMA1
Brand Infineon Infineon
Kategorya Power MOSFET Drivers Power MOSFET Drivers
Katayuan ng Lifecycle Aktibo Aktibo
Part Family HIC-PROFET +2 12V —
Switch Type High-Side N-Channel Smart Power Switch —
Packhaging PG-TSDSO-14-22 (14-pin) PG-TSDSO-14-22 (exposed pad)
Typical R_DS(on) 4 mOhm at 25 °C —
Nominal Load Current 15 A (DC) —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Load-Dump Robustness [DATA_NEEDED: load dump rating] —
Input Logic Compatibility 3.3 V and 5 V CMOS —
Diagnostic Enable Pin (DEN) Yes —
Current Sense Output (IS) Yes (analog proportional to load current) Analog proportional load current
Embedded Protection Over-current, short-circuit, over-temperature, reverse battery —
PWM Capability Yes (low-duty cycle supported via integrated charge pump) Yes, up to [DATA_NEEDED: max PWM frequency]
Temperature na Operasyon -40 °C to +150 °C (junction) —
Uri ng Pagpapasok Surface Mount Surface Mount
Level ng MSL MSL3 (per JEDEC J-STD-020) —
Tindminan RoHS Compliant Compliant (Green Product)
Automotive Qualification AEC-Q100 qualified —
Product Family — PROFET+2 12V
Topolohiya — Smart High-Side Switch, N-Channel MOSFET
Maximum Continuous Load Current — 21 A
On-State Resistance (RDS(on)) — 2.6 mOhm typical
Operating Supply Voltage (Vbb) — 6 V to 18 V
Transient Supply Voltage — 28 V (load dump tolerant)
Standby Current — [DATA_NEEDED: typical uA value]
Fault Output (DEN/IN) — Yes, latched
Reverse Polarity Protection — Yes (ReverSave)
Overload Protection — Yes (current limit)
Short-Circuit Protection — Yes (latched)
Over-Temperature Protection — Yes (thermal shutdown with restart)
Over-Voltage Protection (Vbb clamp) — Yes
Load Dump Clamp Voltage — 41 V typical
Open-Load Detection — Yes (on-state and off-state)
Hanay ng Temperature na Operasyon — -40 C to +150 C junction
Qualification — AEC-Q100 automotive qualified

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita