BTS722204ESPXUMA1 vs BTS70402EPGXUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ BTS722204ESPXUMA1 بواسطة Infineon و BTS70402EPGXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

Infineon
BTS722204ESPXUMA1 BTS722204ESPXUMA1 - 4-Ch SPI High-Side Switch | Infineon

BTS722204ESPXUMA1 - 4-Ch SPI High-Side Switch | Infineon

BTS722204ESPXUMA1 ✓ نشط

مقارنة المواصفات

المعامل BTS722204ESPXUMA1 BTS70402EPGXUMA1
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Product Type Multichannel high-side power switch with SPI —
Family SPOC +2 (SMART7) —
Number of Channels 4 4
Channel 0 Rated Current 4 A —
Channel 1 Rated Current 4 A —
Channel 2 Rated Current 7 A —
Channel 3 Rated Current 7 A —
On-Resistance (low-RDS(on) channels) 5.5 mOhm typical —
On-Resistance (high-RDS(on) channels) 13.5 mOhm typical —
Load Voltage Range [DATA_NEEDED: operating Vbat range] —
الواجهة SPI, daisy-chain capable —
Logic Input Compatibility 3.3 V and 5 V microcontrollers —
Protection Features Overcurrent, overtemperature, short-circuit, reverse polarity, ReverseON, programmable restart Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Outputs Open-load, short-to-GND, short-to-Vbat, overtemperature flags via SPI —
العلبة PG-TSDSO-24-32 (exposed pad) PG-TSDSO-14 (exposed thermal pad)
نوع التركيب Surface Mount Surface Mount
درجة حرارة التشغيل -40C to +150C (automotive AEC-Q100 grade expected) —
AEC-Q100 Qualified (automotive grade, per family) —
حالة RoHS Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
الوظيفة — Smart High-Side Power Switch
تكوين الخرج — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
نطاق درجة حرارة التشغيل — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر