BTS722204ESPXUMA1 vs BTS70402EPGXUMA1 So sánh

So sánh chi tiết song song của BTS722204ESPXUMA1 bằng Infineon và BTS70402EPGXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS722204ESPXUMA1 BTS722204ESPXUMA1 - 4-Ch SPI High-Side Switch | Infineon

BTS722204ESPXUMA1 - 4-Ch SPI High-Side Switch | Infineon

BTS722204ESPXUMA1 ✓ Hoạt động
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS722204ESPXUMA1 BTS70402EPGXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Multichannel high-side power switch with SPI —
Family SPOC +2 (SMART7) —
Number of Channels 4 4
Channel 0 Rated Current 4 A —
Channel 1 Rated Current 4 A —
Channel 2 Rated Current 7 A —
Channel 3 Rated Current 7 A —
On-Resistance (low-RDS(on) channels) 5.5 mOhm typical —
On-Resistance (high-RDS(on) channels) 13.5 mOhm typical —
Load Voltage Range [DATA_NEEDED: operating Vbat range] —
Giao diện SPI, daisy-chain capable —
Logic Input Compatibility 3.3 V and 5 V microcontrollers —
Protection Features Overcurrent, overtemperature, short-circuit, reverse polarity, ReverseON, programmable restart Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Outputs Open-load, short-to-GND, short-to-Vbat, overtemperature flags via SPI —
Hộp PG-TSDSO-24-32 (exposed pad) PG-TSDSO-14 (exposed thermal pad)
Kiểu lắp đặt Surface Mount Surface Mount
Nhiệt độ hoạt động -40C to +150C (automotive AEC-Q100 grade expected) —
AEC-Q100 Qualified (automotive grade, per family) —
Trạng thái RoHS Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
Chức năng — Smart High-Side Power Switch
Cấu hình đầu ra — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
Khoảng nhiệt độ hoạt động — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá