EPC1PCB vs EPC1PC8 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ EPC1PCB بواسطة Intel و EPC1PC8 بواسطة Altera. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل EPC1PCB EPC1PC8
العلامة التجارية Intel Altera
الفئة FPGA & CPLD Memory ICs
حالة دورة الحياة NRND Obsolete
Product Type Enhanced Configuration Device for SRAM-based FPGAs —
Memory Density 1 Mbit —
Program Memory Type Flash (non-volatile) —
Configuration Modes Supported FPP (Fast Passive Parallel), PS (Passive Serial) —
Supply Voltage VCC 3.3 V —
I/O Voltage Tolerance 5.0 V tolerant —
Supported FPGA Families APEX, FLEX, ACEX, Cyclone, Stratix —
الواجهة Altera configuration bus (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) —
Multi-Device Daisy Chain Yes (nCASC, nCS pins) —
Programming Interface JTAG (IEEE 1149.1 boundary scan) —
In-System Programmable Yes —
Program/Erase Endurance [DATA_NEEDED: program/erase cycles] —
Data Retention [DATA_NEEDED: data retention years] —
العلبة PLCC-20 (Plastic Leaded Chip Carrier) 8-pin PDIP (8-PDIP, 300 mil)
نوع التركيب Surface Mount (socket-compatible) Through-Hole (THT)
حالة RoHS [DATA_NEEDED: lead-free/RoHS status] [DATA_NEEDED: RoHS compliance status]
نوع الذاكرة — OTP Configuration PROM (Non-volatile)
حجم الذاكرة — 1 Mbit (1,048,576 bits)
Supply Voltage (VCC) — 5.0 V (typical)
Configuration Interface — Altera proprietary serial (DATA, DCLK, OE, nCS)
Programmability — One-Time Programmable (OTP)
Target FPGAs — ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A
Pin Pitch — 2.54 mm (0.100 in)
درجة حرارة التشغيل — 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range]
Programming Hardware — Altera MasterBlaster / ByteBlaster (legacy programmer)
Configuration Mode — Serial (1-bit data, 1-bit clock)
Lead-Free — [DATA_NEEDED: lead-free / SnPb plating]
مستوى MSL — [DATA_NEEDED: moisture sensitivity level]

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر