INA129U vs INA129UAG4 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ INA129U بواسطة Texas Instruments و INA129UAG4 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
INA129UAG4 ✓ نشطمقارنة المواصفات
| المعامل | INA129U | INA129UAG4 |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp with current-feedback input circuitry |
| Supply Range | ±2.25 V to ±18 V | — |
| Maximum Supply | ±18 V | — |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at G = 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V differential inputs | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain-Setting Resistor | 49.4 kΩ reference resistor | — |
| نطاق درجة حرارة التشغيل | -40°C to +85°C | -40°C to +85°C |
| العلبة | 8-pin SOIC | 8-SOIC, 0.154 inch width, 3.90 mm body width |
| Circuit Count | 1 amplifier | — |
| تيار السكون | [DATA_NEEDED: low quiescent current value] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Offset Voltage | — | 25 µV typical |
| Input Bias Current | — | 5 nA typical |
| Input Protection Range | — | ±40 V |
| Minimum Supply Voltage | — | 1.8 V |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| نوع التركيب | — | Surface mount |
| Gain Setting | — | External resistor |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Offset Voltage Drift | — | [DATA_NEEDED: input offset voltage drift] |
| تيار التغذية | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |