INA129U vs INA129UAG4 Comparison
Detailed side-by-side comparison of INA129U by Texas Instruments and INA129UAG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
INA129UAG4 ✓ ActiveSpecification Comparison
| Parameter | INA129U | INA129UAG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp with current-feedback input circuitry |
| Supply Range | ±2.25 V to ±18 V | — |
| Maximum Supply | ±18 V | — |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at G = 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V differential inputs | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain-Setting Resistor | 49.4 kΩ reference resistor | — |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C |
| Package | 8-pin SOIC | 8-SOIC, 0.154 inch width, 3.90 mm body width |
| Circuit Count | 1 amplifier | — |
| Quiescent Current | [DATA_NEEDED: low quiescent current value] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Offset Voltage | — | 25 µV typical |
| Input Bias Current | — | 5 nA typical |
| Input Protection Range | — | ±40 V |
| Minimum Supply Voltage | — | 1.8 V |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Mounting Type | — | Surface mount |
| Gain Setting | — | External resistor |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Offset Voltage Drift | — | [DATA_NEEDED: input offset voltage drift] |
| Supply Current | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |