INA129U vs INA129UAG4 तुलना

विस्तृत दोनों ओर की तुलना INA129U द्वारा Texas Instruments और INA129UAG4 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
INA129U INA129U - ±18V Precision Instrumentation Amp | Texas Instruments

INA129U - ±18V Precision Instrumentation Amp | Texas Instruments

INA129U ✓ सक्रिय
Texas Instruments
INA129UAG4 INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments

INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments

INA129UAG4 ✓ सक्रिय

विशेषता तुलना

पैरामीटर INA129U INA129UAG4
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Precision, low-power instrumentation amplifier —
Architecture Three-op-amp instrumentation amplifier Three-op-amp with current-feedback input circuitry
Supply Range ±2.25 V to ±18 V —
Maximum Supply ±18 V —
Gain-Bandwidth Product 1.3 MHz 1.3 MHz
Bandwidth at G = 100 200 kHz —
Maximum Offset Voltage 50 µV —
Maximum Offset Drift 0.5 µV/°C —
Maximum Input Bias Current 5 nA —
Minimum Common-Mode Rejection 120 dB —
Input Protection ±40 V differential inputs —
Gain Range 1 to 10,000 1 to 10,000
Gain-Setting Resistor 49.4 kΩ reference resistor —
ऑपरेटिंग तापमान रेंज -40°C to +85°C -40°C to +85°C
पैकेज 8-pin SOIC 8-SOIC, 0.154 inch width, 3.90 mm body width
Circuit Count 1 amplifier —
क्वाइसेंट करंट [DATA_NEEDED: low quiescent current value] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Amplifier Type — Precision instrumentation amplifier
Number of Circuits — 1 circuit
Bandwidth at Gain 100 — 200 kHz
Input Offset Voltage — 25 µV typical
Input Bias Current — 5 nA typical
Input Protection Range — ±40 V
Minimum Supply Voltage — 1.8 V
Maximum Supply Voltage — [DATA_NEEDED: maximum supply voltage]
माउंटिंग प्रकार — Surface mount
Gain Setting — External resistor
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection ratio]
Input Offset Voltage Drift — [DATA_NEEDED: input offset voltage drift]
सप्लाई करंट — [DATA_NEEDED: supply current]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध