MAX1237LEUA+ vs MAX1237EUA+TGA8 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX1237LEUA+ بواسطة Analog Devices و MAX1237EUA+TGA8 بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
MAX1237EUA+TGA8 - 12-Bit 4-Ch 2-Wire Serial ADC | Analog Devices
MAX1237EUA+TGA8 ✓ نشطمقارنة المواصفات
| المعامل | MAX1237LEUA+ | MAX1237EUA+TGA8 |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | ADC/DAC | ADC/DAC |
| حالة دورة الحياة | نشط | نشط |
| الدقة | 12 bit | 12 bit |
| Number of Input Channels | 4 single-ended / 2 differential | 4 single-ended (single-ended) |
| Converter Architecture | SAR (Successive Approximation Register) | — |
| معدل أخذ العينات | 94.4 kSPS | 94.4 ksps (max) |
| Supply Voltage (Low-Voltage Mode) | 2.7 V to 3.6 V | — |
| Supply Voltage (5 V Mode) | 4.5 V to 5.5 V | — |
| Supply Current at 94.4 kSPS | [DATA_NEEDED: full-scale supply current value] | — |
| تيار الإيقاف | < 1 microampere (software/hardware shutdown) | — |
| Internal Reference | 2.048 V (low-voltage mode) / 4.096 V (5 V mode) | — |
| External Reference Support | Yes | — |
| Digital Interface | I2C-compatible 2-wire serial | — |
| Number of Slave Addresses | 7 | — |
| Input Type | Single-ended or pseudo-differential, software configurable | Single-ended |
| العلبة | 8-pin uMAX / uSOP (TSSOP-8, 3.0 mm body width) | 8-pin uMAX (uSOP) |
| نطاق درجة حرارة التشغيل | -40 C to +85 C (industrial, -L suffix) | -40 C to +85 C |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | 1 (per JEDEC J-STD-020) | — |
| حالة RoHS | Compliant | ROHS3 Compliant |
| Architecture | — | SAR (Successive Approximation Register) |
| Supply Voltage Range | — | 2.7 V to 3.6 V or 4.5 V to 5.5 V |
| Supply Current (active) | — | 670 uA at max sampling rate |
| Supply Current (low-power) | — | below 230 uA |
| Internal Reference Voltage | — | 2.048 V (MAX1237) |
| External Reference Range | — | 1 V to VDD |
| Analog Input Range (FS) | — | 0 to VREF or 0 to VDD (when ext. REF applied) |
| Serial Interface | — | I2C-compatible 2-wire (400 kHz Fast Mode, 1.7 MHz High-Speed Mode) |
| Conversion Latency | — | SAR synchronous, no pipeline delay |