MAX1237LEUA+ vs MAX1237EUA+TGA8 तुलना
विस्तृत दोनों ओर की तुलना MAX1237LEUA+ द्वारा Analog Devices और MAX1237EUA+TGA8 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX1237EUA+TGA8 - 12-Bit 4-Ch 2-Wire Serial ADC | Analog Devices
MAX1237EUA+TGA8 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1237LEUA+ | MAX1237EUA+TGA8 |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bit | 12 bit |
| Number of Input Channels | 4 single-ended / 2 differential | 4 single-ended (single-ended) |
| Converter Architecture | SAR (Successive Approximation Register) | — |
| सैंपलिंग रेट | 94.4 kSPS | 94.4 ksps (max) |
| Supply Voltage (Low-Voltage Mode) | 2.7 V to 3.6 V | — |
| Supply Voltage (5 V Mode) | 4.5 V to 5.5 V | — |
| Supply Current at 94.4 kSPS | [DATA_NEEDED: full-scale supply current value] | — |
| शटडाउन करंट | < 1 microampere (software/hardware shutdown) | — |
| Internal Reference | 2.048 V (low-voltage mode) / 4.096 V (5 V mode) | — |
| External Reference Support | Yes | — |
| Digital Interface | I2C-compatible 2-wire serial | — |
| Number of Slave Addresses | 7 | — |
| Input Type | Single-ended or pseudo-differential, software configurable | Single-ended |
| पैकेज | 8-pin uMAX / uSOP (TSSOP-8, 3.0 mm body width) | 8-pin uMAX (uSOP) |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C (industrial, -L suffix) | -40 C to +85 C |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 1 (per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | ROHS3 Compliant |
| Architecture | — | SAR (Successive Approximation Register) |
| Supply Voltage Range | — | 2.7 V to 3.6 V or 4.5 V to 5.5 V |
| Supply Current (active) | — | 670 uA at max sampling rate |
| Supply Current (low-power) | — | below 230 uA |
| Internal Reference Voltage | — | 2.048 V (MAX1237) |
| External Reference Range | — | 1 V to VDD |
| Analog Input Range (FS) | — | 0 to VREF or 0 to VDD (when ext. REF applied) |
| Serial Interface | — | I2C-compatible 2-wire (400 kHz Fast Mode, 1.7 MHz High-Speed Mode) |
| Conversion Latency | — | SAR synchronous, no pipeline delay |