MAX202ECSE+T vs MAX202ECSE+TG068 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX202ECSE+T بواسطة Maxim Integrated و MAX202ECSE+TG068 بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MAX202ECSE+T | MAX202ECSE+TG068 |
|---|---|---|
| العلامة التجارية | Maxim Integrated | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 transceiver | — |
| Transceiver Configuration | 2/2 full-duplex | 2/2 full RS-232 |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| جهد التغذية | +5 V | — |
| Maximum Data Rate | 120 kbit/s | — |
| Maximum Driver Output Slew Rate | 30 V/µs | — |
| ESD Protection | ±15 kV HBM | 15 kV |
| Interface Standards | EIA/TIA-232E and V.28 | — |
| Charge Pump | Integrated dual charge-pump circuitry | — |
| العلبة | 16-pin narrow SOIC | 16-SOIC, 0.154 in x 3.90 mm width |
| نوع التركيب | Surface mount | Surface mount |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Driver Output Protection | [DATA_NEEDED: driver output protection] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Standard Compliance | EIA/TIA-232E and CCITT V.28 | — |
| Supported Protocol | — | RS-232 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Packaging | — | Tape and reel |
| عدد الدبابيس | — | 16 |
| Driver Output Count | — | 2 |
| Receiver Input Count | — | 2 |
| Communication Mode | — | Full duplex |
| Operating Voltage | — | 4.5 V to 5.5 V |
| معدل البيانات | — | [DATA_NEEDED: maximum data rate] |
| Output High and Low Levels | — | [DATA_NEEDED: RS-232 output voltage levels] |
| Input Hysteresis | — | [DATA_NEEDED: receiver input hysteresis] |