MAX202ECSE+T vs MAX202ECSE+TG068 Comparaison

Comparaison détaillée côte à côte de MAX202ECSE+T par Maxim Integrated et MAX202ECSE+TG068 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX202ECSE+T MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

MAX202ECSE+T ✓ Actif
Analog Devices
MAX202ECSE+TG068 MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 ✓ Actif

Comparaison des spécifications

Paramètre MAX202ECSE+T MAX202ECSE+TG068
Marque Maxim Integrated Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-232 transceiver —
Transceiver Configuration 2/2 full-duplex 2/2 full RS-232
Number of Drivers 2 2
Number of Receivers 2 2
Tension d'alimentation +5 V —
Maximum Data Rate 120 kbit/s —
Maximum Driver Output Slew Rate 30 V/µs —
ESD Protection ±15 kV HBM 15 kV
Interface Standards EIA/TIA-232E and V.28 —
Charge Pump Integrated dual charge-pump circuitry —
Boîtier 16-pin narrow SOIC 16-SOIC, 0.154 in x 3.90 mm width
Type de montage Surface mount Surface mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: typical and maximum supply current]
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Driver Output Protection [DATA_NEEDED: driver output protection] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard Compliance EIA/TIA-232E and CCITT V.28 —
Supported Protocol — RS-232
Supply Voltage Range — 4.5 V to 5.5 V
Packaging — Tape and reel
Nombre de broches — 16
Driver Output Count — 2
Receiver Input Count — 2
Communication Mode — Full duplex
Operating Voltage — 4.5 V to 5.5 V
Débit de données — [DATA_NEEDED: maximum data rate]
Output High and Low Levels — [DATA_NEEDED: RS-232 output voltage levels]
Input Hysteresis — [DATA_NEEDED: receiver input hysteresis]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis