MAX202ECSE+T vs MAX202ECSE+TG068 तुलना
विस्तृत दोनों ओर की तुलना MAX202ECSE+T द्वारा Maxim Integrated और MAX202ECSE+TG068 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX202ECSE+T | MAX202ECSE+TG068 |
|---|---|---|
| ब्रांड | Maxim Integrated | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-232 transceiver | — |
| Transceiver Configuration | 2/2 full-duplex | 2/2 full RS-232 |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| सप्लाई वोल्टेज | +5 V | — |
| Maximum Data Rate | 120 kbit/s | — |
| Maximum Driver Output Slew Rate | 30 V/µs | — |
| ESD Protection | ±15 kV HBM | 15 kV |
| Interface Standards | EIA/TIA-232E and V.28 | — |
| Charge Pump | Integrated dual charge-pump circuitry | — |
| पैकेज | 16-pin narrow SOIC | 16-SOIC, 0.154 in x 3.90 mm width |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Driver Output Protection | [DATA_NEEDED: driver output protection] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Standard Compliance | EIA/TIA-232E and CCITT V.28 | — |
| Supported Protocol | — | RS-232 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Packaging | — | Tape and reel |
| पिन की संख्या | — | 16 |
| Driver Output Count | — | 2 |
| Receiver Input Count | — | 2 |
| Communication Mode | — | Full duplex |
| Operating Voltage | — | 4.5 V to 5.5 V |
| डेटा दर | — | [DATA_NEEDED: maximum data rate] |
| Output High and Low Levels | — | [DATA_NEEDED: RS-232 output voltage levels] |
| Input Hysteresis | — | [DATA_NEEDED: receiver input hysteresis] |