MAX3485EPA+ vs MAX3485CPA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3485EPA+ بواسطة Analog Devices و MAX3485CPA+ بواسطة Maxim Integrated. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MAX3485EPA+ | MAX3485CPA+ |
|---|---|---|
| العلامة التجارية | Analog Devices | Maxim Integrated |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 interface transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Transmission Data Rate | Up to 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Protection | Short-circuit current limiting and thermal shutdown | — |
| Driver Output State During Thermal Shutdown | High impedance | — |
| Driver Slew Control | Slew-rate limited | — |
| Receiver Fail-Safe Feature | Yes | — |
| العلبة | 8-pin PDIP | 8-pin PDIP |
| نوع التركيب | Through-hole | Through hole |
| Operating Voltage | 3.3 V nominal | — |
| Power Dissipation | [DATA_NEEDED: power dissipation specification] | — |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: device ESD rating] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| جهد التغذية | — | 3.3 V |
| معدل البيانات | — | Up to 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Communication Standard | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| Transceiver Configuration | — | Half-duplex transceiver |
| Low-Power Operation | — | 3.3 V low-power transceiver |
| EMI and Reflection Control | — | Slew-rate-limited driver intended to minimize EMI and cable reflections |
| تيار التغذية | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Differential Output | — | [DATA_NEEDED: differential output voltage specifications] |
| Receiver Input Range | — | [DATA_NEEDED: receiver differential input range] |
| Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Slew Rate | — | [DATA_NEEDED: driver slew-rate value] |