MAX3485EPA+ vs MAX3485CPA+ 比較
詳細並排比較 MAX3485EPA+ 由 Analog Devices 與 MAX3485CPA+ 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX3485EPA+ | MAX3485CPA+ |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 interface transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Transmission Data Rate | Up to 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Protection | Short-circuit current limiting and thermal shutdown | — |
| Driver Output State During Thermal Shutdown | High impedance | — |
| Driver Slew Control | Slew-rate limited | — |
| Receiver Fail-Safe Feature | Yes | — |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | Through hole |
| Operating Voltage | 3.3 V nominal | — |
| Power Dissipation | [DATA_NEEDED: power dissipation specification] | — |
| 工作溫度 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: device ESD rating] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| 供應電壓 | — | 3.3 V |
| 資料速率 | — | Up to 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Communication Standard | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| Transceiver Configuration | — | Half-duplex transceiver |
| Low-Power Operation | — | 3.3 V low-power transceiver |
| EMI and Reflection Control | — | Slew-rate-limited driver intended to minimize EMI and cable reflections |
| 供應電流 | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Differential Output | — | [DATA_NEEDED: differential output voltage specifications] |
| Receiver Input Range | — | [DATA_NEEDED: receiver differential input range] |
| Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Slew Rate | — | [DATA_NEEDED: driver slew-rate value] |