MAX3485EPA+ vs MAX3485CPA+ তুলনা

. বিস্তৃত সাথে-সাথে তুলনা MAX3485EPA+ নির্দিষ্ট Analog Devices ও MAX3485CPA+ নির্দিষ্ট Maxim Integrated. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন

Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ সক্রিয়
Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ সক্রিয়

বিশিষ্টতা তুলনা

পারামিটার MAX3485EPA+ MAX3485CPA+
ব্র্যান্ড Analog Devices Maxim Integrated
ক্যাটাগরি Interface ICs Interface ICs
লাইফসাইকেল স্ট্যাটাস সক্রিয় সক্রিয়
Product Type RS-485/RS-422 interface transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Transmission Data Rate Up to 10 Mbps —
Driver Count 1 —
Receiver Count 1 —
Supported Standards RS-422 and RS-485 —
Driver Protection Short-circuit current limiting and thermal shutdown —
Driver Output State During Thermal Shutdown High impedance —
Driver Slew Control Slew-rate limited —
Receiver Fail-Safe Feature Yes —
প্যাকেজ 8-pin PDIP 8-pin PDIP
মাউন্টিং টাইপ Through-hole Through hole
Operating Voltage 3.3 V nominal —
Power Dissipation [DATA_NEEDED: power dissipation specification] —
অপারেটিং তাপমাত্রা [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: device ESD rating]
RoHS স্ট্যাটাস [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
সাপ্লাই ভোল্টেজ — 3.3 V
ডেটা রেট — Up to 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Communication Standard — RS-485 and RS-422
Driver Architecture — Slew-rate limited
Transceiver Configuration — Half-duplex transceiver
Low-Power Operation — 3.3 V low-power transceiver
EMI and Reflection Control — Slew-rate-limited driver intended to minimize EMI and cable reflections
সাপ্লাই কারেন্ট — [DATA_NEEDED: typical and maximum supply current]
Driver Differential Output — [DATA_NEEDED: differential output voltage specifications]
Receiver Input Range — [DATA_NEEDED: receiver differential input range]
Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Slew Rate — [DATA_NEEDED: driver slew-rate value]

ডেটাসফেইট ও সম্বল

সমস্ত পণ্যগুলি ব্রাউজ করুন BOM তৈরি করুন রিকোয়েস্ট কোয়ুট