NE5534ADR2G vs NE5534DR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ NE5534ADR2G بواسطة onsemi و NE5534DR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ نشطمقارنة المواصفات
| المعامل | NE5534ADR2G | NE5534DR |
|---|---|---|
| العلامة التجارية | onsemi | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 1 circuit | 1 |
| Supply Voltage Range | 3 V to 20 V | — |
| Slew Rate | 13 V/us | 13 V/us typical |
| العلبة | 8-SOIC, 3.90 mm width | 8-SOIC |
| Packaging | Tape and Reel (TR) | — |
| Temperature Grade | Commercial | — |
| Noise Performance | Low noise | — |
| Output Drive Capability | Improved | — |
| Small-Signal Bandwidth | [DATA_NEEDED: small-signal bandwidth] | — |
| Power Bandwidth | [DATA_NEEDED: power bandwidth] | — |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| نوع التركيب | — | Surface Mount |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |