NE5534ADR2G vs NE5534DR Comparaison
Comparaison détaillée côte à côte de NE5534ADR2G par onsemi et NE5534DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActifComparaison des spécifications
| Paramètre | NE5534ADR2G | NE5534DR |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 1 circuit | 1 |
| Supply Voltage Range | 3 V to 20 V | — |
| Slew Rate | 13 V/us | 13 V/us typical |
| Boîtier | 8-SOIC, 3.90 mm width | 8-SOIC |
| Packaging | Tape and Reel (TR) | — |
| Temperature Grade | Commercial | — |
| Noise Performance | Low noise | — |
| Output Drive Capability | Improved | — |
| Small-Signal Bandwidth | [DATA_NEEDED: small-signal bandwidth] | — |
| Power Bandwidth | [DATA_NEEDED: power bandwidth] | — |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Type de montage | — | Surface Mount |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |