NE5534ADR2G vs NE5534DR Vergleich
Detaillierter Direktvergleich von NE5534ADR2G von onsemi und NE5534DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ AktivSpezifikationsvergleich
| Parameter | NE5534ADR2G | NE5534DR |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 1 circuit | 1 |
| Supply Voltage Range | 3 V to 20 V | — |
| Slew Rate | 13 V/us | 13 V/us typical |
| Gehäuse | 8-SOIC, 3.90 mm width | 8-SOIC |
| Packaging | Tape and Reel (TR) | — |
| Temperature Grade | Commercial | — |
| Noise Performance | Low noise | — |
| Output Drive Capability | Improved | — |
| Small-Signal Bandwidth | [DATA_NEEDED: small-signal bandwidth] | — |
| Power Bandwidth | [DATA_NEEDED: power bandwidth] | — |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Montageart | — | Surface Mount |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |