OPA130PA vs OPA134PA مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ OPA130PA بواسطة Texas Instruments و OPA134PA بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | OPA130PA | OPA134PA |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Type | Single operational amplifier | — |
| Input Topology | FET input | — |
| Gain-Bandwidth Product | 1 MHz | 8 MHz |
| Input Bias Current | 20 pA maximum | 50 pA |
| تيار السكون | 530 uA typical per amplifier | — |
| Input Offset Voltage | 1 mV maximum | — |
| Open-Loop Gain | 120 dB minimum | 600 |
| Common-Mode Rejection Ratio | 90 dB minimum | [DATA_NEEDED: common-mode rejection ratio] |
| Supply Voltage Range | 4.5 V to 36 V | ±18 V |
| Total Supply Voltage Range | 4.5 V to 36 V | — |
| Dual-Supply Operating Range | +/-18 V | — |
| العلبة | 8-pin PDIP, 0.300 inch body width | 8-pin PDIP |
| نوع التركيب | Through-hole | Through-hole |
| عدد الدبابيس | 8 | — |
| Low Offset Voltage | 1 mV maximum | — |
| High Open-Loop Gain | 120 dB minimum | — |
| Excellent Bandwidth | 1 MHz | — |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| AEC-Q100 Qualification | Not applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | 20 V/µs |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Operational Amplifier Type | — | Single high-performance audio operational amplifier |
| Channel Count | — | 1 circuit |
| Input Noise Density | — | 8 nV/√Hz |
| Total Harmonic Distortion | — | 0.00008% |
| Input Stage | — | True FET input |
| Product Family | — | SoundPlus high-performance audio operational amplifier |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |