OPA130PA vs OPA134PA 비교

다음의 상세 나란히 비교: OPA130PA 제조: Texas Instruments 및 OPA134PA 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
OPA134PA OPA134PA - 8MHz FET Audio Op Amp | Texas Instruments

OPA134PA - 8MHz FET Audio Op Amp | Texas Instruments

OPA134PA ✓ 활성

사양 비교

파라미터 OPA130PA OPA134PA
브랜드 Texas Instruments Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
Amplifier Type Single operational amplifier —
Input Topology FET input —
Gain-Bandwidth Product 1 MHz 8 MHz
Input Bias Current 20 pA maximum 50 pA
대기 전류 530 uA typical per amplifier —
Input Offset Voltage 1 mV maximum —
Open-Loop Gain 120 dB minimum 600
Common-Mode Rejection Ratio 90 dB minimum [DATA_NEEDED: common-mode rejection ratio]
Supply Voltage Range 4.5 V to 36 V ±18 V
Total Supply Voltage Range 4.5 V to 36 V —
Dual-Supply Operating Range +/-18 V —
패키지 8-pin PDIP, 0.300 inch body width 8-pin PDIP
실장 유형 Through-hole Through-hole
핀 수 8 —
Low Offset Voltage 1 mV maximum —
High Open-Loop Gain 120 dB minimum —
Excellent Bandwidth 1 MHz —
RoHS 상태 Compliant [DATA_NEEDED: RoHS status]
AEC-Q100 Qualification Not applicable [DATA_NEEDED: AEC-Q100 qualification]
동작 온도 범위 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Slew Rate [DATA_NEEDED: slew rate] 20 V/µs
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Operational Amplifier Type — Single high-performance audio operational amplifier
Channel Count — 1 circuit
Input Noise Density — 8 nV/√Hz
Total Harmonic Distortion — 0.00008%
Input Stage — True FET input
Product Family — SoundPlus high-performance audio operational amplifier
Power-Supply Rejection Ratio — [DATA_NEEDED: power-supply rejection ratio]
REACH Status — [DATA_NEEDED: REACH status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청