OPA130PA vs OPA134PA Comparaison

Comparaison détaillée côte à côte de OPA130PA par Texas Instruments et OPA134PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
OPA134PA OPA134PA - 8MHz FET Audio Op Amp | Texas Instruments

OPA134PA - 8MHz FET Audio Op Amp | Texas Instruments

OPA134PA ✓ Actif

Comparaison des spécifications

Paramètre OPA130PA OPA134PA
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type Single operational amplifier —
Input Topology FET input —
Gain-Bandwidth Product 1 MHz 8 MHz
Input Bias Current 20 pA maximum 50 pA
Courant de repos 530 uA typical per amplifier —
Input Offset Voltage 1 mV maximum —
Open-Loop Gain 120 dB minimum 600
Common-Mode Rejection Ratio 90 dB minimum [DATA_NEEDED: common-mode rejection ratio]
Supply Voltage Range 4.5 V to 36 V ±18 V
Total Supply Voltage Range 4.5 V to 36 V —
Dual-Supply Operating Range +/-18 V —
Boîtier 8-pin PDIP, 0.300 inch body width 8-pin PDIP
Type de montage Through-hole Through-hole
Nombre de broches 8 —
Low Offset Voltage 1 mV maximum —
High Open-Loop Gain 120 dB minimum —
Excellent Bandwidth 1 MHz —
Statut RoHS Compliant [DATA_NEEDED: RoHS status]
AEC-Q100 Qualification Not applicable [DATA_NEEDED: AEC-Q100 qualification]
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Slew Rate [DATA_NEEDED: slew rate] 20 V/µs
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Operational Amplifier Type — Single high-performance audio operational amplifier
Channel Count — 1 circuit
Input Noise Density — 8 nV/√Hz
Total Harmonic Distortion — 0.00008%
Input Stage — True FET input
Product Family — SoundPlus high-performance audio operational amplifier
Power-Supply Rejection Ratio — [DATA_NEEDED: power-supply rejection ratio]
REACH Status — [DATA_NEEDED: REACH status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis