OPA137P vs OPA137PA مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ OPA137P بواسطة Texas Instruments و OPA137PA بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | OPA137P | OPA137PA |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Single FET-input operational amplifier | — |
| Manufacturer | Texas Instruments | — |
| Supply Voltage Range | To ±18 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Bias Current | ±5 pA typical | ±10 pA |
| Input Offset Voltage | 1.5 mV maximum | — |
| تيار السكون | 120 μA per channel | 120 µA per channel |
| Open-Loop Gain | 145 dB | 145 dB |
| Input Common-Mode Range | Rail-to-rail input to V+ | Rail-to-rail input to V+ |
| Number of Channels | 1 channel | — |
| العلبة | 8-pin PDIP | 8-pin PDIP |
| نوع التركيب | Through-hole | — |
| Series | MicroAmplifier | — |
| Input Type | FET input | — |
| Primary Application | Low-level analog signal conditioning | — |
| Operating Voltage | ±18 V maximum supply | — |
| Supplier Package Designation | PDIP-8 | — |
| Amplifier Type | — | Single J-FET-input operational amplifier |
| Number of Amplifier Channels | — | 1 channel |
| Nominal Total Supply Voltage | — | ±18 V |
| Slew Rate | — | 3.5 V/µs |
| Maximum Input Offset Voltage | — | 15 mV |
| Package Type | — | Through-hole PDIP |
| Product Family | — | MicroAmplifier |
| حالة RoHS | — | Compliant |
| نطاق درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | — | [DATA_NEEDED: maximum supply current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Current | — | [DATA_NEEDED: short-circuit current] |
| مستوى MSL | — | [DATA_NEEDED: moisture sensitivity level] |