OPA137P vs OPA137PA 比較
詳細並排比較 OPA137P 由 Texas Instruments 與 OPA137PA 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | OPA137P | OPA137PA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Single FET-input operational amplifier | — |
| Manufacturer | Texas Instruments | — |
| Supply Voltage Range | To ±18 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Bias Current | ±5 pA typical | ±10 pA |
| Input Offset Voltage | 1.5 mV maximum | — |
| 靜態電流 | 120 μA per channel | 120 µA per channel |
| Open-Loop Gain | 145 dB | 145 dB |
| Input Common-Mode Range | Rail-to-rail input to V+ | Rail-to-rail input to V+ |
| Number of Channels | 1 channel | — |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | — |
| Series | MicroAmplifier | — |
| Input Type | FET input | — |
| Primary Application | Low-level analog signal conditioning | — |
| Operating Voltage | ±18 V maximum supply | — |
| Supplier Package Designation | PDIP-8 | — |
| Amplifier Type | — | Single J-FET-input operational amplifier |
| Number of Amplifier Channels | — | 1 channel |
| Nominal Total Supply Voltage | — | ±18 V |
| Slew Rate | — | 3.5 V/µs |
| Maximum Input Offset Voltage | — | 15 mV |
| Package Type | — | Through-hole PDIP |
| Product Family | — | MicroAmplifier |
| RoHS 狀態 | — | Compliant |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| 供應電流 | — | [DATA_NEEDED: maximum supply current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Current | — | [DATA_NEEDED: short-circuit current] |
| MSL 等級 | — | [DATA_NEEDED: moisture sensitivity level] |