OPA137P vs OPA137PA Perbandingan
Perbandingan bersamaan detil OPA137P dari Texas Instruments dan OPA137PA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | OPA137P | OPA137PA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Single FET-input operational amplifier | — |
| Manufacturer | Texas Instruments | — |
| Supply Voltage Range | To ±18 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Bias Current | ±5 pA typical | ±10 pA |
| Input Offset Voltage | 1.5 mV maximum | — |
| Arus Memerintah | 120 μA per channel | 120 µA per channel |
| Open-Loop Gain | 145 dB | 145 dB |
| Input Common-Mode Range | Rail-to-rail input to V+ | Rail-to-rail input to V+ |
| Number of Channels | 1 channel | — |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Tipe Mounting | Through-hole | — |
| Series | MicroAmplifier | — |
| Input Type | FET input | — |
| Primary Application | Low-level analog signal conditioning | — |
| Operating Voltage | ±18 V maximum supply | — |
| Supplier Package Designation | PDIP-8 | — |
| Amplifier Type | — | Single J-FET-input operational amplifier |
| Number of Amplifier Channels | — | 1 channel |
| Nominal Total Supply Voltage | — | ±18 V |
| Slew Rate | — | 3.5 V/µs |
| Maximum Input Offset Voltage | — | 15 mV |
| Package Type | — | Through-hole PDIP |
| Product Family | — | MicroAmplifier |
| Status RoHS | — | Compliant |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Arus Pemuat | — | [DATA_NEEDED: maximum supply current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Current | — | [DATA_NEEDED: short-circuit current] |
| Level MSL | — | [DATA_NEEDED: moisture sensitivity level] |