OPA336PA vs OPA336P مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ OPA336PA بواسطة Texas Instruments و OPA336P بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | OPA336PA | OPA336P |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Type | Single operational amplifier | — |
| Technology | CMOS | — |
| Number of Channels | 1 channel | — |
| Minimum Supply Voltage | 2.1 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Supply Type | Single supply | Single supply |
| تيار السكون | 20uA per amplifier | 20 uA per amplifier typical |
| Maximum Offset Voltage | 125uV | — |
| Typical Input Bias Current | 1pA | — |
| Open-Loop Gain | 115dB | 115 dB typical |
| Gain-Bandwidth Product | 100kHz | [DATA_NEEDED: gain-bandwidth product] |
| Output Swing | Within 3mV of the supplies at 100kohm load | — |
| Common-Mode Input Range | Extends to the negative supply | — |
| نوع الخرج | Rail-to-rail | — |
| العلبة | 8-pin PDIP | 8-pin PDIP |
| نوع التركيب | Through-hole | Through-hole |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| Product Type | — | Single operational amplifier |
| Channel Count | — | 1 channel |
| Input Offset Voltage | — | 125 uV maximum |
| Input Bias Current | — | 1 pA |
| Input Common-Mode Behavior | — | Rail-to-rail input |
| Output Behavior | — | Rail-to-rail output |
| Family | — | MicroAmplifier series |
| Single-Supply Operation | — | Supported |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| نطاق درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Output Current | — | [DATA_NEEDED: output current] |