OPA336PA vs OPA336P Vergleich
Detaillierter Direktvergleich von OPA336PA von Texas Instruments und OPA336P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA336PA | OPA336P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Single operational amplifier | — |
| Technology | CMOS | — |
| Number of Channels | 1 channel | — |
| Minimum Supply Voltage | 2.1 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Supply Type | Single supply | Single supply |
| Ruhestrom | 20uA per amplifier | 20 uA per amplifier typical |
| Maximum Offset Voltage | 125uV | — |
| Typical Input Bias Current | 1pA | — |
| Open-Loop Gain | 115dB | 115 dB typical |
| Gain-Bandwidth Product | 100kHz | [DATA_NEEDED: gain-bandwidth product] |
| Output Swing | Within 3mV of the supplies at 100kohm load | — |
| Common-Mode Input Range | Extends to the negative supply | — |
| Ausgangstyp | Rail-to-rail | — |
| Gehäuse | 8-pin PDIP | 8-pin PDIP |
| Montageart | Through-hole | Through-hole |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Product Type | — | Single operational amplifier |
| Channel Count | — | 1 channel |
| Input Offset Voltage | — | 125 uV maximum |
| Input Bias Current | — | 1 pA |
| Input Common-Mode Behavior | — | Rail-to-rail input |
| Output Behavior | — | Rail-to-rail output |
| Family | — | MicroAmplifier series |
| Single-Supply Operation | — | Supported |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Output Current | — | [DATA_NEEDED: output current] |