OPA336PA vs OPA336P Perbandingan
Perbandingan bersamaan detil OPA336PA dari Texas Instruments dan OPA336P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | OPA336PA | OPA336P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Single operational amplifier | — |
| Technology | CMOS | — |
| Number of Channels | 1 channel | — |
| Minimum Supply Voltage | 2.1 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Supply Type | Single supply | Single supply |
| Arus Memerintah | 20uA per amplifier | 20 uA per amplifier typical |
| Maximum Offset Voltage | 125uV | — |
| Typical Input Bias Current | 1pA | — |
| Open-Loop Gain | 115dB | 115 dB typical |
| Gain-Bandwidth Product | 100kHz | [DATA_NEEDED: gain-bandwidth product] |
| Output Swing | Within 3mV of the supplies at 100kohm load | — |
| Common-Mode Input Range | Extends to the negative supply | — |
| Tipe Output | Rail-to-rail | — |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Tipe Mounting | Through-hole | Through-hole |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Product Type | — | Single operational amplifier |
| Channel Count | — | 1 channel |
| Input Offset Voltage | — | 125 uV maximum |
| Input Bias Current | — | 1 pA |
| Input Common-Mode Behavior | — | Rail-to-rail input |
| Output Behavior | — | Rail-to-rail output |
| Family | — | MicroAmplifier series |
| Single-Supply Operation | — | Supported |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Output Current | — | [DATA_NEEDED: output current] |