PCA9557DB vs PCA9557D مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ PCA9557DB بواسطة Texas Instruments و PCA9557D بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

Texas Instruments
PCA9557DB PCA9557DB - 8-Bit I2C I/O Expander | Texas Instruments

PCA9557DB - 8-Bit I2C I/O Expander | Texas Instruments

PCA9557DB ✓ نشط
Texas Instruments
PCA9557D PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D ✗ انتهى عمره الإنتاجي

مقارنة المواصفات

المعامل PCA9557DB PCA9557D
العلامة التجارية Texas Instruments Texas Instruments
الفئة Interface ICs Interface ICs
حالة دورة الحياة نشط نهاية العمر الإنتاجي
Device Type 8-bit low-power I2C/SMBus I/O expander —
Number of I/O Ports 8 —
جهد التغذية التشغيلي 2.3 V to 5.5 V —
Maximum Serial Bus Frequency 400 kHz —
Serial Interface I2C and SMBus —
العلبة 16-pin SSOP 16-SOIC (DR, 7.5 mil pitch)
Package Width 0.209 inch (5.30 mm) —
Register Features Reset and configuration registers —
نوع التركيب Surface mount Surface Mount
I/O Direction Control [DATA_NEEDED: I/O direction configuration details] —
Logic Input High Voltage [DATA_NEEDED: logic input high voltage] —
Logic Input Low Voltage [DATA_NEEDED: logic input low voltage] —
Output Current [DATA_NEEDED: per-pin output current] —
Low-Level Output Current [DATA_NEEDED: low-level output current] —
تيار السكون [DATA_NEEDED: quiescent current] —
نطاق درجة حرارة التشغيل [DATA_NEEDED: operating temperature range] —
I2C Address Configuration [DATA_NEEDED: hardware address pins and address range] —
حالة RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Number of I/O Bits — 8
الواجهة — I2C, SMBus
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
درجة حرارة التشغيل — -40 C to +85 C
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
مستوى MSL — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر