PCA9557DB vs PCA9557D Comparaison
Comparaison détaillée côte à côte de PCA9557DB par Texas Instruments et PCA9557D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)
PCA9557D ✗ Fin de vieComparaison des spécifications
| Paramètre | PCA9557DB | PCA9557D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Fin de vie |
| Device Type | 8-bit low-power I2C/SMBus I/O expander | — |
| Number of I/O Ports | 8 | — |
| Tension d'alimentation de fonctionnement | 2.3 V to 5.5 V | — |
| Maximum Serial Bus Frequency | 400 kHz | — |
| Serial Interface | I2C and SMBus | — |
| Boîtier | 16-pin SSOP | 16-SOIC (DR, 7.5 mil pitch) |
| Package Width | 0.209 inch (5.30 mm) | — |
| Register Features | Reset and configuration registers | — |
| Type de montage | Surface mount | Surface Mount |
| I/O Direction Control | [DATA_NEEDED: I/O direction configuration details] | — |
| Logic Input High Voltage | [DATA_NEEDED: logic input high voltage] | — |
| Logic Input Low Voltage | [DATA_NEEDED: logic input low voltage] | — |
| Output Current | [DATA_NEEDED: per-pin output current] | — |
| Low-Level Output Current | [DATA_NEEDED: low-level output current] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| I2C Address Configuration | [DATA_NEEDED: hardware address pins and address range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of I/O Bits | — | 8 |
| Interface | — | I2C, SMBus |
| Bus Frequency (Max) | — | 400 kHz |
| Supply Voltage (VCC) | — | 2.3 V to 5.5 V |
| Température de fonctionnement | — | -40 C to +85 C |
| Standby Current (Max) | — | 1 uA |
| Output Drive Current per Bit | — | [DATA_NEEDED: per-bit source/sink mA rating] |
| I/O Voltage Tolerance | — | 5.5 V tolerant |
| Reset Input | — | Active-low hardware RESET + software reset (general call) |
| Interrupt Output (INT) | — | Yes, open-drain |
| Slave Address Pins | — | A0, A1, A2 (3 pins, 8 addresses within family) |
| Niveau MSL | — | 1 (unlimited floor life) |
| Lead-Free | — | Yes |
| Configuration Registers | — | Input/output direction registers, polarity inversion |