PCA9557DB vs PCA9557D Vergleich

Detaillierter Direktvergleich von PCA9557DB von Texas Instruments und PCA9557D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
PCA9557DB PCA9557DB - 8-Bit I2C I/O Expander | Texas Instruments

PCA9557DB - 8-Bit I2C I/O Expander | Texas Instruments

PCA9557DB ✓ Aktiv
Texas Instruments
PCA9557D PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D ✗ Abgekündigt

Spezifikationsvergleich

Parameter PCA9557DB PCA9557D
Marke Texas Instruments Texas Instruments
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Ende des Lebenszyklus
Device Type 8-bit low-power I2C/SMBus I/O expander —
Number of I/O Ports 8 —
Betriebsversorgungsspannung 2.3 V to 5.5 V —
Maximum Serial Bus Frequency 400 kHz —
Serial Interface I2C and SMBus —
Gehäuse 16-pin SSOP 16-SOIC (DR, 7.5 mil pitch)
Package Width 0.209 inch (5.30 mm) —
Register Features Reset and configuration registers —
Montageart Surface mount Surface Mount
I/O Direction Control [DATA_NEEDED: I/O direction configuration details] —
Logic Input High Voltage [DATA_NEEDED: logic input high voltage] —
Logic Input Low Voltage [DATA_NEEDED: logic input low voltage] —
Output Current [DATA_NEEDED: per-pin output current] —
Low-Level Output Current [DATA_NEEDED: low-level output current] —
Ruhestrom [DATA_NEEDED: quiescent current] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] —
I2C Address Configuration [DATA_NEEDED: hardware address pins and address range] —
RoHS-Status [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Number of I/O Bits — 8
Schnittstelle — I2C, SMBus
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
Betriebstemperatur — -40 C to +85 C
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
MSL-Level — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern