TLE9201SGAUMA1 vs BTS70402EPGXUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ TLE9201SGAUMA1 بواسطة Infineon و BTS70402EPGXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل TLE9201SGAUMA1 BTS70402EPGXUMA1
العلامة التجارية Infineon Infineon
الفئة Motor Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
البنية الطوبولوجية H-Bridge (2 half-bridges) —
Output Current (Continuous) 6 A —
Current Limitation Threshold 8 A —
RDS(on) per Switch (typ.) < 100 mOhm —
Operating Voltage Range 5.0 V to 28 V 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Input Compatibility 3.3 V / 5.5 V —
PWM Frequency (max) 20 kHz —
Control Interface PWM/DIR + SPI diagnostics —
Standby Current Low (per datasheet) —
Protection Features Short circuit, Over-temperature, Open load Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
العلبة PG-DSO-12-17 (12-pin exposed-pad SOIC) PG-TSDSO-14 (exposed thermal pad)
نطاق درجة حرارة التشغيل [DATA_NEEDED: operating temperature range] -40 °C to +150 °C junction
نوع التركيب Surface Mount Surface Mount
Automotive Qualification AEC-Q100 —
مستوى MSL [DATA_NEEDED: MSL level] —
حالة RoHS Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
الوظيفة — Smart High-Side Power Switch
Number of Channels — 4
تكوين الخرج — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر