TS902ID vs TS914ID مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ TS902ID بواسطة STMicroelectronics و TS914ID بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID Obsoleteمقارنة المواصفات
| المعامل | TS902ID | TS914ID |
|---|---|---|
| العلامة التجارية | STMicroelectronics | STMicroelectronics |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | Obsolete | نشط |
| Amplifier Type | Dual operational amplifier | Quad CMOS operational amplifier |
| Channel Count | 2 channels | — |
| Rail-to-Rail | Input and output | — |
| Gain-Bandwidth Product | 1.4 MHz | 1.4 MHz |
| Input Offset Voltage | 10 mV | 2 mV maximum |
| Supply Voltage Range | Single or dual operation from 2.5 V to 16 V | 2.7 V to 16 V |
| Standby Current | 0.5 uA | — |
| Standby Output State | Reduced current consumption and high-impedance outputs | — |
| نطاق درجة حرارة التشغيل | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| العلبة | SOIC-14 (SO14), surface mount | 14-pin SOIC |
| Package Pin Count | 14 pins | — |
| Architecture | CMOS | — |
| Application Category | General-purpose instrumentation and signal conditioning | — |
| Output Impedance in Standby | High impedance | — |
| Operating Mode | Single-supply or dual-supply operation | — |
| نوع التركيب | Surface mount | Surface mount |
| Manufacturer Product Description | Rail-to-rail CMOS dual operational amplifier with standby position | — |
| حالة دورة الحياة | Obsolete product according to manufacturer catalog | — |
| Number of Channels | — | 4 channels |
| Input and Output Type | — | Rail-to-rail input and output |
| Supply Configuration | — | Single or dual supply |
| Input Bias Current | — | 1 pA typical |
| Supply Current per Amplifier | — | 200 µA at 3 V |
| Process Technology | — | CMOS |
| Unity Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| حالة RoHS | — | [DATA_NEEDED: RoHS compliance status] |