TS902ID vs TS914ID Perbandingan
Perbandingan bersamaan detil TS902ID dari STMicroelectronics dan TS914ID dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID ObsoletePerbandingan Spesifikasi
| Parameter Umum | TS902ID | TS914ID |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Amplifier Type | Dual operational amplifier | Quad CMOS operational amplifier |
| Channel Count | 2 channels | — |
| Rail-to-Rail | Input and output | — |
| Gain-Bandwidth Product | 1.4 MHz | 1.4 MHz |
| Input Offset Voltage | 10 mV | 2 mV maximum |
| Supply Voltage Range | Single or dual operation from 2.5 V to 16 V | 2.7 V to 16 V |
| Standby Current | 0.5 uA | — |
| Standby Output State | Reduced current consumption and high-impedance outputs | — |
| Rentang Suhu Kerja | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-14 (SO14), surface mount | 14-pin SOIC |
| Package Pin Count | 14 pins | — |
| Architecture | CMOS | — |
| Application Category | General-purpose instrumentation and signal conditioning | — |
| Output Impedance in Standby | High impedance | — |
| Operating Mode | Single-supply or dual-supply operation | — |
| Tipe Mounting | Surface mount | Surface mount |
| Manufacturer Product Description | Rail-to-rail CMOS dual operational amplifier with standby position | — |
| Status Lingkungan Hidup | Obsolete product according to manufacturer catalog | — |
| Number of Channels | — | 4 channels |
| Input and Output Type | — | Rail-to-rail input and output |
| Supply Configuration | — | Single or dual supply |
| Input Bias Current | — | 1 pA typical |
| Supply Current per Amplifier | — | 200 µA at 3 V |
| Process Technology | — | CMOS |
| Unity Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Status RoHS | — | [DATA_NEEDED: RoHS compliance status] |