TS902ID vs TS914ID तुलना
विस्तृत दोनों ओर की तुलना TS902ID द्वारा STMicroelectronics और TS914ID द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID Obsoleteविशेषता तुलना
| पैरामीटर | TS902ID | TS914ID |
|---|---|---|
| ब्रांड | STMicroelectronics | STMicroelectronics |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| Amplifier Type | Dual operational amplifier | Quad CMOS operational amplifier |
| Channel Count | 2 channels | — |
| Rail-to-Rail | Input and output | — |
| Gain-Bandwidth Product | 1.4 MHz | 1.4 MHz |
| Input Offset Voltage | 10 mV | 2 mV maximum |
| Supply Voltage Range | Single or dual operation from 2.5 V to 16 V | 2.7 V to 16 V |
| Standby Current | 0.5 uA | — |
| Standby Output State | Reduced current consumption and high-impedance outputs | — |
| ऑपरेटिंग तापमान रेंज | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| पैकेज | SOIC-14 (SO14), surface mount | 14-pin SOIC |
| Package Pin Count | 14 pins | — |
| Architecture | CMOS | — |
| Application Category | General-purpose instrumentation and signal conditioning | — |
| Output Impedance in Standby | High impedance | — |
| Operating Mode | Single-supply or dual-supply operation | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Manufacturer Product Description | Rail-to-rail CMOS dual operational amplifier with standby position | — |
| लाइफसाइकिल स्थिति | Obsolete product according to manufacturer catalog | — |
| Number of Channels | — | 4 channels |
| Input and Output Type | — | Rail-to-rail input and output |
| Supply Configuration | — | Single or dual supply |
| Input Bias Current | — | 1 pA typical |
| Supply Current per Amplifier | — | 200 µA at 3 V |
| Process Technology | — | CMOS |
| Unity Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS compliance status] |