Analog Devices

AD548KR - Low-Power Precision BiFET Op Amp | Analog Devices

MPN: AD548KR ✗ انتهى عمره الإنتاجي
18 V Vdss 170 uA typical, 200 uA maximum Id 8-lead SOIC Package
الحد الأدنى للطلب: 1 |

AD548KR نظرة عامة

The Analog Devices AD548KR is a precision, low-power BiFET operational amplifier designed for high-performance, low-power signal-conditioning applications. It provides a maximum supply voltage of 18 V, a 1 MHz unity-gain bandwidth, a 1 V/us slew rate, a maximum offset voltage of 250 uV, and a maximum offset-voltage drift of 2 uV/°C. The device is supplied in an 8-lead SOIC package for surface-mount assembly.

A BiFET operational amplifier is an input stage that uses field-effect transistors to achieve very high input impedance and low input bias current. Within the amplifier hierarchy, the AD548KR is a voltage-feedback operational amplifier, also classified as a precision low-noise amplifier and a low-power analog signal-conditioning IC. Its combination of low supply current and precision DC performance supports battery-powered instruments, industrial measurement systems, and low-level sensor interfaces.

The AD548 family is specified for low quiescent current of 170 uA typical and 200 uA maximum. Its warmed input bias current reaches 10 pA maximum, while offset voltage is limited to 250 uV maximum and offset drift to 2 uV/°C maximum. These characteristics make the amplifier suitable for high-impedance transducers, current measurements, and precision feedback networks where bias current and thermal drift can materially affect accuracy.

AC performance includes a 1 MHz unity-gain bandwidth and a 1 V/us slew rate. The Analog Devices AD548 data sheet identifies the AD548 as pin compatible with the LF441, TL061, and AD542, allowing designers to improve performance while reducing power dissipation by as much as 85%. A single-amplifier, single-supply-compatible topology provides flexibility for battery-operated and dual-supply analog systems.

Typical uses include low-level sensor amplification, biomedical instrumentation, industrial process measurement, photodiode signal chains, precision current sensing, and portable data-acquisition equipment. The low bias current benefits high-source-impedance sensors, while the low quiescent current limits supply consumption in battery-powered systems.

The primary PCB-design consideration is input bias-current management. Keep sensitive input traces short, use guarded or low-leakage construction where appropriate, and place the amplifier input network close to the device. Confirm the SOIC-8 footprint, supply decoupling, output-load limits, and stability requirements against the manufacturer data sheet before production release.

This page combines manufacturer specifications, lifecycle information, pin-compatible comparison data, application guidance, and design-focused selection criteria to support faster engineering evaluation. It also identifies where replacement decisions require checking exact grade, package, supply range, and electrical limits.

بدائل مباشرة لـ AD548KR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

AD548JRZ

✅ بديل مباشر
📦 SOIC-8
Same 8-pin SOIC footprint and AD548-family functions; the ordering-grade temperature and exact guaranteed limits must be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

AD548JRZ-REEL

✅ بديل مباشر
📦 SOIC-8
Same 8-pin SOIC electrical package as AD548KR; production delivery uses reel packaging instead of the target order format

📋 بديل مرجعي (غير موجود في الكتالوج)

AD548JR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 SOIC-8
Same AD548-family 8-pin SOIC configuration; verify the exact grade temperature range and guaranteed limits

📋 بديل مرجعي (غير موجود في الكتالوج)

AD548JZ

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 SOIC-8
Same AD548-family 8-pin SOIC configuration with an ordering-option difference; verify grade, reel configuration, and lifecycle status

📋 بديل مرجعي (غير موجود في الكتالوج)

AD548KR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Analog Devices
📦 SOIC-8
Precision, low-power BiFET operational amplifier · 1 amplifier · 18 V · ±4.5 V to ±18 V · 170 uA typical, 200 uA maximum · 10 pA maximum, warmed · 250 uV maximum · 2 uV/°C maximum

تواصل لمعرفة السعر

عرض ورقة البيانات ←

AD548KR الحدود القصوى والخصائص الكهربائية

Amplifier Type Precision, low-power BiFET operational amplifier
Number of Amplifiers 1 amplifier
Maximum Supply Voltage 18 V
Operating Supply Range ±4.5 V to ±18 V
تيار السكون 170 uA typical, 200 uA maximum
Input Bias Current 10 pA maximum, warmed
Offset Voltage 250 uV maximum
Offset Voltage Drift 2 uV/°C maximum
Unity-Gain Bandwidth 1 MHz
Slew Rate 1 V/us
Input Noise Voltage 2 V p-p
العلبة 8-lead SOIC
نوع التركيب Surface mount
Maximum Power Dissipation 500 mW
AD548B Temperature Range -40°C to +85°C
Pin Compatibility Compatible with LF441, TL061, and AD542
Lifecycle Recommendation Not recommended for new designs

دليل تكوين أطراف AD548KR 8-lead soic

تكوين الأطراف لـ AD548KR (حزمة 8-lead soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8-lead soic لـ AD548KR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD548KR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

AD548KR مناسب لـ 6 التطبيقs: Precision Current Sensing, Battery-Powered Sensor Interface, Biomedical Signal Conditioning, Industrial Process Measurement, Photodiode Amplification, Portable Data Acquisition.

⚡

Precision Current Sensing

The AD548KR is well suited to precision current sensing because its BiFET input stage limits warmed input bias current to 10 pA maximum, helping reduce measurement error when connected to a high-impedance shunt or transimpedance network. Its 250 uV maximum offset voltage and 2 uV/°C maximum drift also support accurate low-level signal amplification. Place the device close to the sense element, use low-leakage PCB construction, and verify that the selected gain remains stable with the intended load and output capacitance.

🔋

Battery-Powered Sensor Interface

The AD548KR fits battery-powered sensor interfaces that require more precision than a general-purpose amplifier but cannot tolerate excessive supply consumption. Its quiescent current is 170 uA typical and 200 uA maximum, while the 1 MHz unity-gain bandwidth supports signals extending beyond a simple DC bridge. Use low-leakage input routing and controlled reference circuitry to preserve accuracy. Supply operating headroom and output swing must remain within the ±4.5 V to ±18 V operating range.

💊

Biomedical Signal Conditioning

The AD548KR can serve as a low-level signal conditioner in biomedical instrumentation because its 10 pA maximum warmed input bias current reduces loading on high-source-impedance sensors. The 250 uV maximum offset voltage and 2 uV/°C maximum drift help maintain measurement stability, while the low 170 uA typical quiescent current supports portable equipment. Confirm medical-system requirements, isolation strategy, input protection, and applicable regulatory validation separately; amplifier qualification alone does not establish system compliance.

🏭

Industrial Process Measurement

The AD548KR is appropriate for industrial process-measurement front ends that combine slow sensor signals with modest bandwidth requirements. Its precision offset and drift characteristics support stable amplification, and its 1 MHz unity-gain bandwidth is sufficient for many pressure, temperature, and slow process-control signals. The 1 V/us slew rate supports larger output transitions without requiring a wide-band amplifier. Protect industrial inputs from transients, maintain clean grounding, and account for the -40°C to +85°C AD548B industrial-temperature family range when applicable.

📷

Photodiode Amplification

The AD548KR is suitable for low-level photodiode and optical-sensor amplification because its very low warmed input bias current limits disturbance of high-impedance sources. The 1 MHz unity-gain bandwidth permits useful signal bandwidth without moving to a much higher-power amplifier, while low quiescent current benefits portable optical instruments. Use guarded input traces, keep the photodiode junction area and PCB surface clean, and choose feedback capacitance that preserves the required signal bandwidth and phase margin.

📱

Portable Data Acquisition

The AD548KR supports portable data-acquisition channels that must combine low power with accurate DC measurement. Its maximum quiescent current of 200 uA reduces continuous battery drain, while the 250 uV maximum offset and 2 uV/°C maximum drift improve channel stability. The 1 MHz unity-gain bandwidth is appropriate for many sensor, thermocouple, and low-frequency acquisition stages. Validate input filtering, common-mode range, gain accuracy, and settling time across the complete measurement bandwidth.

ملخص المنتجات الموصى بها

AD548JRZ Pin-compatible AD548-family amplifier يُستخدم في: Precision Current Sensing, Battery-Powered Sensor Interface, Biomedical Signal Conditioning, Industrial Process Measurement, Photodiode Amplification, Portable Data Acquisition
What is the AD548KR?
The AD548KR is a precision, low-power BiFET operational amplifier from Analog Devices with a maximum supply voltage of 18 V, 1 MHz unity-gain bandwidth, and 1 V/us slew rate. According to the Analog Devices AD548 data sheet, it combines low supply current with low offset voltage and low drift, making it suitable for high-impedance sensors and precision low-power signal chains. The AD548KR is packaged in an 8-lead SOIC for surface-mount assembly.
What is the operating voltage range of AD548KR?
The AD548KR operates from ±4.5 V to ±18 V, with 18 V listed as the maximum total supply voltage. According to the AD548KR data sheet, the device is a precision, low-power BiFET operational amplifier. Designers should interpret ±18 V as the dual-supply operating boundary rather than permitting 18 V on either rail. Confirm decoupling, input voltage, and output voltage limits against the specific operating conditions before finalizing the circuit.
What are the key specifications of AD548KR that engineers should know?
The AD548KR combines a 1 MHz unity-gain bandwidth, 1 V/us slew rate, 200 uA maximum quiescent current, 10 pA maximum warmed input bias current, 250 uV maximum offset voltage, and 2 uV/°C maximum offset drift. According to the Analog Devices AD548 data sheet, these specifications position it for precision, low-power, high-impedance applications. Its 8-lead SOIC package also permits direct comparison with compatible LF441, TL061, and AD542 implementations.
Where can I download the AD548KR datasheet PDF?
The AD548KR datasheet PDF is available through the Analog Devices AD548 product page and the linked data-sheet mirrors. The manufacturer page identifies the AD548 as a precision, low-power BiFET operational amplifier and links the current data sheet, while the listed PDF mirror provides a direct document download. Use the pin-description table and electrical-characteristics tables in that document when assigning PCB pins and validating worst-case operating limits.
Where can I find the AD548KR pinout?
The AD548KR pinout is shown in the pin-configuration section of the Analog Devices AD548 data sheet. The component uses an 8-lead SOIC outline, so its footprint corresponds to a standard SOIC-8 land pattern. Assign signals only after checking the manufacturer pin-description table, including offset-null and compensation-pin functions where marked. The package image on this page identifies the mechanical format, while the data sheet remains the authority for each pin's electrical role.
What can replace the AD548KR?
The AD548JRZ is a documented pin-compatible replacement candidate for the AD548KR, with the same 8-pin package and closely related electrical characteristics. The AD548 data sheet also states compatibility with the LF441, TL061, and AD542 families, but a replacement must still meet the required supply voltage, bandwidth, offset, bias-current, and temperature limits. Treat the AD548KR as not recommended for new designs and verify the exact replacement grade before changing an approved design.
Is AD548JRZ the same as AD548KR?
The AD548JRZ and AD548KR share the same 8-lead SOIC format and closely related AD548-family functions, making the AD548JRZ a practical direct replacement candidate. They are not interchangeable without checking the ordering-grade temperature range, offset limits, quiescent current, and production status. Cross-reference information identifies the AD548JRZ as directly replaceable, while the Analog Devices product page marks the AD548 family as not recommended for new designs.
What is the best Analog Devices equivalent for AD548KR?
The AD548JRZ is the closest documented Analog Devices equivalent for an AD548KR replacement because it uses the same 8-pin package and closely related precision BiFET amplifier characteristics. For new designs, evaluate the AD548B family because the manufacturer lists the AD548B as available over the -40°C to +85°C industrial range. A footprint-compatible part still requires an engineering check of exact minimum gain, output swing, supply range, and stability.
AD548KR vs AD548JRZ - which is better for a precision amplifier design?
The AD548KR and AD548JRZ are closely related 8-pin AD548 devices, so the better choice depends on the required temperature grade, availability plan, and exact guaranteed limits. The AD548KR is the K-grade ordering option, while the AD548JRZ is a documented direct replacement candidate. According to the Analog Devices product page, the AD548 family is not recommended for new designs, so both parts require lifecycle confirmation before being selected for a fresh production program.
When should I choose AD548KR over LF441 or TL061?
Choose the AD548KR when low power and precision DC behavior are more important than simply retaining a legacy amplifier selection. The AD548 data sheet identifies it as pin compatible with LF441, TL061, and AD542 and states that performance can improve while power dissipation falls by as much as 85%. The AD548KR provides 170 uA typical quiescent current, 250 uV maximum offset voltage, and 10 pA maximum warmed bias current, but verify every guaranteed limit before substitution.
Is AD548KR suitable for high-impedance sensor measurement?
The AD548KR is suitable for high-impedance sensor measurement because its BiFET input stage provides 10 pA maximum warmed bias current, while its 250 uV maximum offset voltage and 2 uV/°C maximum drift support accurate low-level signal conditioning. According to the Analog Devices AD548 data sheet, the device is intended for high-performance, low-power applications. Guard the input node and minimize leakage from PCB contamination when source impedances are very high.
Where can I buy AD548KR and check its price and lead time?
Use the Request a Quote form on this page to request current AD548KR availability, commercial terms, lead time, and quantity pricing. Because the Analog Devices product page marks the AD548 family as not recommended for new designs, lifecycle and supply status should be confirmed during quotation. The visible structured pricing area is the authoritative place for current price and stock information, and no static price should be copied into a design comparison.
What is the price of AD548KR?
The current AD548KR price depends on order quantity, shipment condition, and supply status, so it should be obtained through the Request a Quote form on this page. The manufacturer lists the AD548 family as not recommended for new designs, which can affect availability and commercial planning. Request the exact AD548KR ordering code, quantity, required date, and packaging preference when seeking a quotation.
What is the lead time for AD548KR?
Current AD548KR lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. Lead time can change with inventory, lifecycle status, and order size, and the AD548 family is marked by the manufacturer as not recommended for new designs. Include the target annual usage, production build schedule, and acceptable package-delivery format in the request to obtain an actionable schedule.
Is AD548KR in stock?
AD548KR stock status should be checked through the Request a Quote form on this page because the manufacturer marks the AD548 family as not recommended for new designs. Availability can vary by exact ordering suffix and shipment condition. Request the quantity and delivery date needed for your program, and avoid treating a general family listing as confirmation that the AD548KR itself is immediately available.
Does AD548KR comply with RoHS and REACH?
The current RoHS and REACH status for the AD548KR must be confirmed with the manufacturer or an authorized compliance document before production release. The accessible AD548 product information identifies the device as not recommended for new designs but does not provide a complete customer-facing compliance declaration in the cited material. Use the Request a Quote form to request current environmental and material-compliance documentation for the exact AD548KR ordering code.
What design considerations matter for an AD548KR precision amplifier?
The most important AD548KR design consideration is controlling input bias current and offset error in the selected feedback network. Keep input traces short, protect high-impedance nodes from contamination and leakage, use suitable input and output decoupling, and verify the circuit's stability with its intended gain and load. According to the AD548 data sheet, the device combines low power with precision DC performance, making careful layout as important as nominal component selection.

بيانات مرجعية هندسية لـ AD548KR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the AD548KR when maintaining a legacy precision-amplifier design requires a known 8-lead SOIC footprint, very low input bias current, and low supply current. The AD548JRZ is the strongest direct replacement candidate when procurement availability or ordering configuration requires a different suffix, but confirm the exact temperature grade and guaranteed limits. AD548JRZ-REEL offers the same electrical package with a reel-oriented production format, while AD548JR and AD548JZ require verification of their individual ordering details. For a new design, do not choose solely by footprint: evaluate whether the AD548 family's not-recommended-for-new-designs status is acceptable, compare current low-power precision amplifiers, and confirm supply requirements, offset accuracy, input bias current, bandwidth, slew rate, package, and lifecycle status before release.

المقارنة مع البدائل

المعامل هذا المنتج AD548JRZ AD548JRZ-REEL AD548JR AD548JZ AD548KR
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices

أبرز الفروقات

  • Low-power precision operation (مقابلAD548JRZ)
  • Very low warmed input bias current (مقابلAD548JRZ)
  • Precision DC characteristics (مقابلAD548JRZ)
  • Legacy footprint upgrade path (مقابلAD548JRZ-REEL)

ملاحظات التصميم

For high-impedance sensor inputs, keep the AD548KR input node physically short and isolate it from residual flux, moisture, and conductive contamination. The device's warmed input bias current can reach 10 pA maximum, so board leakage that appears in parallel with the source may dominate the total error. Use a guarded input layout where practical, avoid copper underneath the sensitive node, and clean the assembled PCB before high-impedance calibration.

Place supply bypass capacitors close to the power and ground pins and use a compact, low-loop-area return path. The 8-lead SOIC footprint is pin-compatible with several legacy amplifiers, but footprint compatibility does not guarantee identical stability behavior. Recheck the feedback network, output loading, input capacitance, and gain-bandwidth interaction whenever AD548KR replaces an LF441, TL061, or AD542 implementation.

Do not interpret the ±4.5 V to ±18 V operating range as permission to apply 18 V to a single rail. Check the common-mode input range, output swing, and maximum total supply voltage at the highest temperature and worst-case load. Also verify the exact AD548 grade and suffix before substitution because ordering options can differ in temperature grade or production-delivery format even when they use the same SOIC-8 footprint.

Estimated: at a 15 V total supply, 12 V output, and 1 mA load, the amplifier's approximate signal-path dissipation is 3 mW, calculated as (15 V - 12 V) × 1 mA. This estimate excludes quiescent power and does not represent a manufacturer thermal rating. Actual PCB heating depends on total supply voltage, load current, copper area, ambient temperature, and neighboring heat sources.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The cited AD548 product information does not provide explicit customer-facing RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Request current compliance documentation for the exact AD548KR ordering code before production release.

تم التحقق من البيانات في: 2026-11-06 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

AD548KR datasheet AD548KR datasheet pdf AD548KR pinout AD548KR specifications AD548KR replacement AD548KR equivalent AD548KR cross reference AD548KR vs AD548JRZ AD548KR SOIC-8 footprint AD548KR application circuit AD548KR precision amplifier AD548KR price AD548KR stock Analog Devices AD548KR AD548KR low power op amp

المكونات والمصطلحات ذات الصلة

Analog Devices AD548KR AD548JRZ AD548JRZ-REEL AD548JR AD548JZ BiFET operational amplifier precision operational amplifier low-power operational amplifier voltage-feedback amplifier analog signal-conditioning IC input bias current offset voltage offset drift unity-gain bandwidth slew rate quiescent current SOIC-8 surface-mount technology RoHS REACH biomedical instrumentation industrial process measurement battery-powered sensor interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر