Analog Devices

AD7466BRM - 12-Bit 200 kSPS Micro-Power ADC | Analog Devices

MPN: AD7466BRM ✓ نشط
1.6 V to 3.6 V Vdss 8-MSOP, 0.118 inch / 3.00 mm width Package Greater than 100 kHz Speed
الحد الأدنى للطلب: 1 |

AD7466BRM نظرة عامة

The Analog Devices AD7466BRM is a 12-bit successive-approximation analog-to-digital converter designed for low-power, high-speed signal acquisition. It operates from a single 1.6 V to 3.6 V supply, supports throughput rates up to 200 kSPS, and is packaged in an 8-MSOP package. The converter uses a low-noise, wide-bandwidth track-and-hold amplifier to handle input signals with frequencies in excess of 100 kHz.

An ADC is an analog-to-digital converter, a semiconductor device that converts a continuously varying analog voltage into a numeric code for processing, measurement, or control. The AD7466 belongs to the successive-approximation ADC family, within the broader ADC and data-converter IC hierarchy. This architecture is useful when moderate resolution, compact size, low power consumption, and serial data transfer are more important than very high conversion rates.

The AD7466BRM provides a 12-bit conversion resolution, a single analog input channel, and serial-interface operation identified in the product documentation as MICROWIRE, QSPI, and SPI compatible. Its single-supply operating range allows operation in compact battery-powered and embedded systems where a 1.8 V or 2.5 V rail is available. The low-power architecture helps reduce energy consumption during periodic sampling and standby operation.

The AD7466, AD7467, and AD7468 form a related family of 12-bit, 10-bit, and 8-bit high-speed, low-power successive-approximation converters. The AD7466 is therefore useful when the system requires greater resolution than the lower-resolution family members while retaining the same general serial-converter architecture. The wide-bandwidth track-and-hold amplifier supports acquisition of higher-frequency input signals than a slow low-pass-oriented converter would allow.

Typical applications include industrial process monitoring, portable instrumentation, sensor interfaces, battery-powered measurement systems, and embedded data acquisition. In a sensor interface, the ADC can digitize a conditioned analog output from a transducer or signal-conditioning front end. In an industrial system, its serial interface can connect to a microcontroller or digital signal processor while its low operating voltage helps reduce system power requirements.

Designers should pay attention to input range, reference voltage, sampling timing, digital-interface levels, and the acquisition time required by the source impedance. The input network should present a stable settling waveform during the track phase, and the serial clock and data lines should be configured to match the host controller. Use the manufacturer datasheet and pin-description table when assigning PCB tracks, and review the operating limits for the exact suffix before applying the part in a production design.

بدائل مباشرة لـ AD7466BRM — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع AD7466BRM (نفس عامل الشكل والبصمة) — يختلف في Package, Resolution, Throughput Rate.

Analog Devices
Package: 8-MSOP
Resolution: 10 bit
Throughput Rate: 200 kSPS
قارن مع AD7466BRM →

AD7467BRM

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Analog Devices
📦 8-MSOP
10 bit · Successive approximation (SAR) · 200 kSPS · 1 channel · 1.6 V to 3.6 V · 8-MSOP · Surface mount

تواصل لمعرفة السعر

عرض ورقة البيانات ←

AD7468BRM

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-MSOP
Same 8-MSOP family package and interface concept, but resolution is 8 bit versus 12 bit for AD7466BRM; resolution differs by 33.3%.

📋 بديل مرجعي (غير موجود في الكتالوج)

AD7466BRMZ

✅ بديل مباشر
📦 8-MSOP
Same AD7466 electrical device and 8-MSOP package; ordering suffix changes the assembly format, with no stated change to the key ADC ratings.

📋 بديل مرجعي (غير موجود في الكتالوج)

AD7466BRM-REEL7

✅ بديل مباشر
📦 8-MSOP
Same AD7466 electrical device and 8-MSOP package; reel-oriented ordering suffix changes the delivery format, with no stated change to the key ADC ratings.

📋 بديل مرجعي (غير موجود في الكتالوج)

AD7466BRM-REEL

✅ بديل مباشر
📦 8-MSOP
Same AD7466 electrical device and 8-MSOP package; reel-oriented ordering suffix changes the delivery format, with no stated change to the key ADC ratings.

📋 بديل مرجعي (غير موجود في الكتالوج)

AD7466BRM الحدود القصوى والخصائص الكهربائية

ADC Type Successive-approximation ADC
الدقة 12 bit
Number of Input Channels 1 channel
Throughput Rate Up to 200 kSPS
Supply Voltage Range 1.6 V to 3.6 V
Input Frequency Capability Greater than 100 kHz
Architecture Low-noise, wide-bandwidth track-and-hold amplifier
الواجهة MICROWIRE, QSPI, and SPI compatible
العلبة 8-MSOP, 0.118 inch / 3.00 mm width
Package Pin Count 8 pins
نوع التركيب Surface mount
Power Consumption Low power; exact value not stated in the supplied product-page summary
Input Type Single-ended analog input
Conversion Method Successive approximation
Manufacturer Analog Devices
RoHS Compliance No according to Rochester Electronics product data
حالة دورة الحياة Production

دليل تكوين أطراف AD7466BRM 8 pins

تكوين الأطراف لـ AD7466BRM (حزمة 8 pins). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8 pins لـ AD7466BRM

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD7466BRM.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

AD7466BRM مناسب لـ 6 التطبيقs: Industrial Process Monitoring, Battery-Powered Sensor Interfaces, Portable Medical Monitoring, Embedded Data Acquisition, Test and Measurement Instruments, Battery Charging and Power Management.

🏭

Industrial Process Monitoring

The AD7466BRM is suitable for digitizing conditioned pressure, temperature, or flow sensor signals in industrial monitoring systems. Its 12-bit resolution provides up to 4096 code levels, while the 1.6 V to 3.6 V supply range supports compact acquisition boards. The successive-approximation architecture and track-and-hold amplifier are useful when the controller samples sensors at regular intervals rather than requiring continuous high-rate acquisition. Place the converter close to the sensor-conditioning network to reduce noise pickup, and use the serial interface to transfer each result to a microcontroller.

🔋

Battery-Powered Sensor Interfaces

The AD7466BRM fits portable sensor-acquisition designs that operate from a low-voltage battery-derived rail. Its single 1.6 V to 3.6 V supply and low-power operation reduce the electrical burden on compact embedded systems, while the 12-bit conversion result provides more detail than an 8-bit converter. The device can wake for a measurement and return the host controller to a low-energy state between samples. Input settling, leakage, and the sensor’s own power consumption should be included in the overall energy budget rather than evaluating only the ADC.

💊

Portable Medical Monitoring

The AD7466BRM can serve as the acquisition element in portable medical or wellness instruments that digitize low-bandwidth sensor outputs. The 12-bit resolution is useful when measurements require consistent numerical reporting across a controlled analog range, and the compact 8-MSOP package supports space-constrained enclosures. The device is intended for use in designs where the sensor front end provides appropriate conditioning and safety isolation. Designers must verify medical-system requirements, input limits, and applicable regulatory obligations independently rather than treating ADC qualification as a complete medical-device approval.

🧩

Embedded Data Acquisition

The AD7466BRM is well suited to embedded acquisition nodes that periodically measure analog inputs and report results through a serial bus. Its 200 kSPS maximum throughput provides margin for burst sampling, while the low supply voltage fits controller-based systems. The MICROWIRE, QSPI, and SPI-compatible interface simplifies connection to common embedded peripherals and digital signal processors. For accurate acquisition, allow the source impedance and external network to settle during the track phase and ensure the serial clock rate satisfies the converter’s timing requirements.

🔬

Test and Measurement Instruments

The AD7466BRM can be used in low-to-moderate-bandwidth measurement instruments that need a compact 12-bit conversion stage. It is appropriate for waveform sampling, sensor calibration, and general-purpose laboratory acquisition where the system does not require a converter faster than 200 kSPS. The low-noise, wide-bandwidth track-and-hold amplifier can capture input signals above 100 kHz, although system-level noise, reference stability, and front-end bandwidth determine practical accuracy. Use calibrated reference and input networks to preserve the converter’s resolution in a precision instrument.

⚡

Battery Charging and Power Management

The AD7466BRM can monitor scaled voltage, current, or temperature signals in a battery-management or charging-control subsystem. Its low-voltage operation allows the ADC to operate alongside compact control logic, and the 12-bit result can provide useful resolution for supervisory measurements. The converter should be placed behind appropriately scaled dividers or sensor networks so that transients and operating extremes remain inside the absolute maximum ratings. Sampling coordination with the charger is important to avoid interpreting switching transients as genuine changes in the monitored quantity.

What is the operating voltage of the AD7466BRM?
The AD7466BRM operates from a single 1.6 V to 3.6 V supply. According to the Analog Devices AD7466/AD7467/AD7468 datasheet, the single-supply range allows use with low-voltage 1.8 V and 2.5 V systems. The supply must remain within the datasheet limits while the analog input and digital interface are configured for the intended operating point.
What is the conversion speed of the AD7466BRM?
The AD7466BRM supports throughput rates up to 200 kSPS. The Analog Devices product page identifies the AD7466 as a high-speed, low-power successive-approximation converter, while the manufacturer datasheet describes the shared AD7466/AD7467/AD7468 family operating from 1.6 V to 3.6 V. The actual sampling interval should be checked against acquisition, conversion, and serial-transfer timing.
What resolution does the AD7466BRM use?
The AD7466BRM provides 12-bit resolution. The Analog Devices datasheet groups it with the AD7467 10-bit and AD7468 8-bit devices, all using successive-approximation conversion. The 12-bit code provides more quantization levels than the lower-resolution family members when the analog signal requires additional measurement detail.
What is the AD7466BRM package and pin count?
The AD7466BRM is offered in an 8-MSOP surface-mount package with eight pins and a 3.00 mm package width. Product information also identifies the package as 8-SSOP or 8-MSOP. Use the Analog Devices datasheet pin-description table for exact signal names and the manufacturer package drawing for land-pattern implementation.
Can the AD7466BRM replace an AD7467 or AD7468?
The AD7466BRM is a 12-bit device, whereas the AD7467 and AD7468 are 10-bit and 8-bit members of the same family. They may share the general converter and interface concept, but a replacement must be checked for resolution, input range, timing, and pin-level compatibility. The AD7466BRM should not be selected as a drop-in replacement solely because it uses the same family designation.
Where can I download the AD7466BRM datasheet PDF?
The official AD7466/AD7467/AD7468 datasheet PDF is available from Analog Devices at the product-datasheet link on this page. The document covers the shared converter family, electrical characteristics, timing, pin descriptions, and application information. It is the preferred reference for wiring, supply sequencing, conversion timing, and input-range decisions.
Where can I find the AD7466BRM pinout?
The AD7466BRM pinout is found in the Analog Devices manufacturer datasheet, not in a generic package drawing. Because the exact signal assignment must follow the published pin-description table, use that table when assigning the analog input, supply, reference, and serial-interface connections. Do not infer pin functions from the package outline alone.
What serial interface does the AD7466BRM use?
The AD7466BRM uses a serial interface identified by the product documentation as MICROWIRE, QSPI, and SPI compatible. According to the Rochester Electronics product description, the device is a one-conversion, 12-bit SAR ADC with MICROWIRE, QSPI, and SPI serial access. The host controller should be configured for the compatible clocking and data-capture convention.
Is the AD7466BRM suitable for battery-powered instrumentation?
Yes, the AD7466BRM is suitable for many battery-powered instrumentation systems because it operates from 1.6 V to 3.6 V and is designed for low-power conversion. The benefit depends on the system duty cycle: continuous sampling consumes more energy than periodic acquisition followed by standby. A low-power host, sleep-mode strategy, and suitable sample rate should be evaluated together.
How do I choose between AD7466BRM and a higher-resolution ADC?
Choose the AD7466BRM when 12-bit resolution, throughput up to 200 kSPS, low supply voltage, and a compact 8-MSOP are sufficient. Choose a higher-resolution converter when the required noise performance, dynamic range, or signal-to-quantization ratio cannot be achieved with 12 bits. The comparison should include resolution, acquisition time, input bandwidth, power, interface, and package.
What is the best drop-in replacement for the AD7466BRM?
The AD7466BRM-REEL7 and AD7466BRMZ are closely related ordering variants listed for the same AD7466 device and 8-pin package, but their packaging suffix differs from the tube-style AD7466BRM. A replacement should be selected by confirming the exact electrical grade, pinout, package, temperature range, and assembly method. The manufacturer ordering table is the controlling reference.
Is the AD7466BRM the same as AD7466BRM-REEL7?
No, they are not identical orderable MPNs. AD7466BRM and AD7466BRM-REEL7 refer to the same underlying AD7466 family device with different ordering or packaging information. The electrical function is closely related, but production substitution requires confirming the package, reel configuration, temperature grade, and manufacturer ordering code.
Where can I buy the AD7466BRM online?
Use the Request a Quote form on this page to request current AD7466BRM availability, volume pricing, and delivery information. Commercial terms can change with quantity, inventory, and packaging requirements, so confirm the exact suffix and assembly format with the quote team before releasing a purchase order.
What is the price of the AD7466BRM?
Current commercial pricing for the AD7466BRM is best obtained through the Request a Quote form on this page. The form allows quantity and packaging requirements to be specified, which is important because tube, reel, and other orderable configurations may be handled differently. Use the returned quote for budgetary or purchasing decisions.
What is the lead time and stock status for the AD7466BRM?
Current lead time and stock status should be confirmed through the Request a Quote form on this page. Availability depends on the exact AD7466BRM ordering configuration, quantity, and manufacturing status. Submit the required quantity and package format so the supplier can provide an accurate commitment.

بيانات مرجعية هندسية لـ AD7466BRM — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the AD7466BRM when your design needs a 12-bit ADC, throughput up to 200 kSPS, and a single 1.6 V to 3.6 V supply in an 8-MSOP package. It is a strong fit for portable instrumentation, industrial sensor acquisition, and embedded measurement nodes where the input can settle within the acquisition interval. Choose AD7467BRM when 10-bit resolution is sufficient and the lower code density is acceptable; choose AD7468BRM when 8-bit resolution is adequate. Use AD7466BRMZ, AD7466BRM-REEL7, or AD7466BRM-REEL when the electrical device is suitable but the assembly or ordering format differs. Before substitution, verify the exact pinout, temperature range, supply limits, timing, and production package in the manufacturer documentation.

المقارنة مع البدائل

المعامل هذا المنتج AD7467BRM AD7468BRM AD7466BRMZ AD7466BRM-REEL7 AD7466BRM-REEL
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Resolution 12 bit 10 bit 8 bit 12 bit 12 bit 12 bit
Throughput Rate Up to 200 kSPS Up to 200 kSPS Up to 200 kSPS Up to 200 kSPS Up to 200 kSPS Up to 200 kSPS
Supply Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
Input Channel Count 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Conversion Architecture Successive approximation Successive approximation Successive approximation Successive approximation Successive approximation Successive approximation
Interface MICROWIRE, QSPI, and SPI compatible MICROWIRE, QSPI, and SPI compatible MICROWIRE, QSPI, and SPI compatible MICLOWIRE, QSPI, and SPI compatible MICROWIRE, QSPI, and SPI compatible MICROWIRE, QSPI, and SPI compatible

أبرز الفروقات

  • Higher conversion resolution than the lower-resolution family members (مقابلAD7467BRM and AD7468BRM)
  • Low-voltage operation for compact embedded systems (مقابلAD7467BRM and AD7468BRM)
  • Same core electrical platform with multiple orderable assembly formats (مقابلAD7466BRMZ and AD7466BRM-REEL7)

ملاحظات التصميم

Keep the analog supply and reference network close to the AD7466BRM and decouple the supply with the capacitor configuration specified by Analog Devices. A low-voltage ADC still needs a clean supply because reference and supply disturbances can appear directly in the conversion result. Avoid routing the input trace beneath the digital interface or other switching-node areas.

Allow the source impedance and external input network to settle during the track-and-hold acquisition interval. A source with rapidly changing resistance or capacitance can create acquisition error before conversion begins. Use short input traces, a suitable series isolation resistor, and a local return path; validate settling with the worst-case source impedance and sampling rate.

Place the ADC close to the source or conditioning circuitry, with the analog input routed away from the serial clock and data lines. Maintain a continuous ground reference beneath and around the analog section, and place bypass components close to their associated supply pins. The 8-MSOP footprint requires attention to solder-paste and assembly rules because the package is narrow.

معلومات الامتثال

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The Rochester Electronics product listing states RoHS Compliance: No. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

AD7466BRM AD7466BRM datasheet AD7466BRM datasheet pdf AD7466BRM pinout AD7466BRM equivalent AD7466BRM replacement AD7466BRM cross reference AD7466BRM price AD7466BRM stock Analog Devices AD7466BRM AD7466 12-bit 200kSPS ADC AD7466 8-MSOP ADC AD7466 sensor acquisition AD7466BRM vs AD7467BRM AD7466BRM application circuit

المكونات والمصطلحات ذات الصلة

Analog Devices AD7466BRM AD7466 AD7467 AD7468 AD7467BRM AD7468BRM AD7466BRMZ AD7466BRM-REEL7 AD7466BRM-REEL 12-bit ADC successive-approximation ADC analog-to-digital converter data-converter IC track-and-hold amplifier MICROWIRE QSPI SPI 1.6 V to 3.6 V single supply 200 kSPS throughput 8-MSOP surface-mount package industrial process monitoring sensor interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر