AD7466BRM - 12-Bit 200 kSPS Micro-Power ADC | Analog Devices
부품 번호: AD7466BRM ✓ 활성AD7466BRM 개요
An ADC is an analog-to-digital converter, a semiconductor device that converts a continuously varying analog voltage into a numeric code for processing, measurement, or control. The AD7466 belongs to the successive-approximation ADC family, within the broader ADC and data-converter IC hierarchy. This architecture is useful when moderate resolution, compact size, low power consumption, and serial data transfer are more important than very high conversion rates.
The AD7466BRM provides a 12-bit conversion resolution, a single analog input channel, and serial-interface operation identified in the product documentation as MICROWIRE, QSPI, and SPI compatible. Its single-supply operating range allows operation in compact battery-powered and embedded systems where a 1.8 V or 2.5 V rail is available. The low-power architecture helps reduce energy consumption during periodic sampling and standby operation.
The AD7466, AD7467, and AD7468 form a related family of 12-bit, 10-bit, and 8-bit high-speed, low-power successive-approximation converters. The AD7466 is therefore useful when the system requires greater resolution than the lower-resolution family members while retaining the same general serial-converter architecture. The wide-bandwidth track-and-hold amplifier supports acquisition of higher-frequency input signals than a slow low-pass-oriented converter would allow.
Typical applications include industrial process monitoring, portable instrumentation, sensor interfaces, battery-powered measurement systems, and embedded data acquisition. In a sensor interface, the ADC can digitize a conditioned analog output from a transducer or signal-conditioning front end. In an industrial system, its serial interface can connect to a microcontroller or digital signal processor while its low operating voltage helps reduce system power requirements.
Designers should pay attention to input range, reference voltage, sampling timing, digital-interface levels, and the acquisition time required by the source impedance. The input network should present a stable settling waveform during the track phase, and the serial clock and data lines should be configured to match the host controller. Use the manufacturer datasheet and pin-description table when assigning PCB tracks, and review the operating limits for the exact suffix before applying the part in a production design.
드롭인 대체품: AD7466BRM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD7466BRM (동일 폼 팩터 및 풋프린트) — 차이점: Package, Resolution, Throughput Rate.
AD7467BRM
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →AD7468BRM
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD7466BRMZ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7466BRM-REEL7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7466BRM-REEL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7466BRM 최대 정격 & 전기적 특성
| ADC Type | Successive-approximation ADC |
| 분해능 | 12 bit |
| Number of Input Channels | 1 channel |
| Throughput Rate | Up to 200 kSPS |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Input Frequency Capability | Greater than 100 kHz |
| Architecture | Low-noise, wide-bandwidth track-and-hold amplifier |
| 인터페이스 | MICROWIRE, QSPI, and SPI compatible |
| 패키지 | 8-MSOP, 0.118 inch / 3.00 mm width |
| Package Pin Count | 8 pins |
| 실장 유형 | Surface mount |
| Power Consumption | Low power; exact value not stated in the supplied product-page summary |
| Input Type | Single-ended analog input |
| Conversion Method | Successive approximation |
| Manufacturer | Analog Devices |
| RoHS Compliance | No according to Rochester Electronics product data |
| 수명 주기 상태 | Production |
AD7466BRM 8 pins 핀 구성 가이드
AD7466BRM(8 pins 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AD7466BRM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD7466BRM 적합 용도: 6 애플리케이션s: Industrial Process Monitoring, Battery-Powered Sensor Interfaces, Portable Medical Monitoring, Embedded Data Acquisition, Test and Measurement Instruments, Battery Charging and Power Management.
Industrial Process Monitoring
The AD7466BRM is suitable for digitizing conditioned pressure, temperature, or flow sensor signals in industrial monitoring systems. Its 12-bit resolution provides up to 4096 code levels, while the 1.6 V to 3.6 V supply range supports compact acquisition boards. The successive-approximation architecture and track-and-hold amplifier are useful when the controller samples sensors at regular intervals rather than requiring continuous high-rate acquisition. Place the converter close to the sensor-conditioning network to reduce noise pickup, and use the serial interface to transfer each result to a microcontroller.
추천
Battery-Powered Sensor Interfaces
The AD7466BRM fits portable sensor-acquisition designs that operate from a low-voltage battery-derived rail. Its single 1.6 V to 3.6 V supply and low-power operation reduce the electrical burden on compact embedded systems, while the 12-bit conversion result provides more detail than an 8-bit converter. The device can wake for a measurement and return the host controller to a low-energy state between samples. Input settling, leakage, and the sensor’s own power consumption should be included in the overall energy budget rather than evaluating only the ADC.
추천
Portable Medical Monitoring
The AD7466BRM can serve as the acquisition element in portable medical or wellness instruments that digitize low-bandwidth sensor outputs. The 12-bit resolution is useful when measurements require consistent numerical reporting across a controlled analog range, and the compact 8-MSOP package supports space-constrained enclosures. The device is intended for use in designs where the sensor front end provides appropriate conditioning and safety isolation. Designers must verify medical-system requirements, input limits, and applicable regulatory obligations independently rather than treating ADC qualification as a complete medical-device approval.
추천
Embedded Data Acquisition
The AD7466BRM is well suited to embedded acquisition nodes that periodically measure analog inputs and report results through a serial bus. Its 200 kSPS maximum throughput provides margin for burst sampling, while the low supply voltage fits controller-based systems. The MICROWIRE, QSPI, and SPI-compatible interface simplifies connection to common embedded peripherals and digital signal processors. For accurate acquisition, allow the source impedance and external network to settle during the track phase and ensure the serial clock rate satisfies the converter’s timing requirements.
추천
Test and Measurement Instruments
The AD7466BRM can be used in low-to-moderate-bandwidth measurement instruments that need a compact 12-bit conversion stage. It is appropriate for waveform sampling, sensor calibration, and general-purpose laboratory acquisition where the system does not require a converter faster than 200 kSPS. The low-noise, wide-bandwidth track-and-hold amplifier can capture input signals above 100 kHz, although system-level noise, reference stability, and front-end bandwidth determine practical accuracy. Use calibrated reference and input networks to preserve the converter’s resolution in a precision instrument.
추천
Battery Charging and Power Management
The AD7466BRM can monitor scaled voltage, current, or temperature signals in a battery-management or charging-control subsystem. Its low-voltage operation allows the ADC to operate alongside compact control logic, and the 12-bit result can provide useful resolution for supervisory measurements. The converter should be placed behind appropriately scaled dividers or sensor networks so that transients and operating extremes remain inside the absolute maximum ratings. Sampling coordination with the charger is important to avoid interpreting switching transients as genuine changes in the monitored quantity.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD7466BRM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD7467BRM | AD7468BRM | AD7466BRMZ | AD7466BRM-REEL7 | AD7466BRM-REEL |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 12 bit | 10 bit | 8 bit | 12 bit | 12 bit | 12 bit |
| Throughput Rate | Up to 200 kSPS | Up to 200 kSPS | Up to 200 kSPS | Up to 200 kSPS | Up to 200 kSPS | Up to 200 kSPS |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Input Channel Count | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Conversion Architecture | Successive approximation | Successive approximation | Successive approximation | Successive approximation | Successive approximation | Successive approximation |
| Interface | MICROWIRE, QSPI, and SPI compatible | MICROWIRE, QSPI, and SPI compatible | MICROWIRE, QSPI, and SPI compatible | MICLOWIRE, QSPI, and SPI compatible | MICROWIRE, QSPI, and SPI compatible | MICROWIRE, QSPI, and SPI compatible |
주요 차별점
- Higher conversion resolution than the lower-resolution family members (vs AD7467BRM and AD7468BRM)
- Low-voltage operation for compact embedded systems (vs AD7467BRM and AD7468BRM)
- Same core electrical platform with multiple orderable assembly formats (vs AD7466BRMZ and AD7466BRM-REEL7)
설계 노트
Keep the analog supply and reference network close to the AD7466BRM and decouple the supply with the capacitor configuration specified by Analog Devices. A low-voltage ADC still needs a clean supply because reference and supply disturbances can appear directly in the conversion result. Avoid routing the input trace beneath the digital interface or other switching-node areas.
Allow the source impedance and external input network to settle during the track-and-hold acquisition interval. A source with rapidly changing resistance or capacitance can create acquisition error before conversion begins. Use short input traces, a suitable series isolation resistor, and a local return path; validate settling with the worst-case source impedance and sampling rate.
Place the ADC close to the source or conditioning circuitry, with the analog input routed away from the serial clock and data lines. Maintain a continuous ground reference beneath and around the analog section, and place bypass components close to their associated supply pins. The 8-MSOP footprint requires attention to solder-paste and assembly rules because the package is narrow.
규정 준수 정보
The Rochester Electronics product listing states RoHS Compliance: No. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified.