Analog Devices

ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

MPN: ADM3485EARZ ✓ نشط
3.3 V Vdss 8-pin SOIC Package
الحد الأدنى للطلب: 1 |

ADM3485EARZ نظرة عامة

Analog Devices ADM3485EARZ is a 3.3 V, low-power, half-duplex RS-485/RS-422 differential line transceiver rated for 12 Mbps data rates and protected to ±15 kV ESD. The device is offered in an 8-pin SOIC package and combines a balanced driver, differential receiver, transmitter enable, and receiver enable functions for multipoint bus communication. Its 3.3 V single-supply operation makes it suitable for modern industrial, instrumentation, and embedded systems.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over longer cables or electrically noisy environments. RS-485 supports multipoint half-duplex buses, while RS-422 emphasizes balanced point-to-point or multidrop links. The differential architecture reduces susceptibility to common-mode noise and allows reliable communication across a bus when termination, biasing, and grounding are implemented correctly.

The ADM3485E provides up to 12 Mbps operation from a single 3.3 V supply. Separate driver-enable and receiver-enable controls support directional control in half-duplex designs. Its ±15 kV ESD protection improves robustness against electrostatic discharge encountered during industrial installation, while low-power operation helps limit supply demand in distributed nodes. The 8-pin SOIC package also supports conventional surface-mount assembly and compact board layouts.

This transceiver family is designed for balanced data transmission over multipoint bus lines and for systems requiring controlled driver and receiver operation. The ADM3485EARZ combines a low-voltage supply requirement with a relatively high 12 Mbps data rate, making it adaptable to industrial monitoring, factory equipment, building controls, test systems, and data-acquisition networks. Its half-duplex architecture reduces the number of external interface signals compared with separate full-duplex transceivers.

PCB implementation must preserve the integrity of the differential bus. Place the transceiver close to the line-driver and receiver components, route Y and Z as a tightly coupled pair, provide the bus termination required by the topology, and keep the driver output and receiver input paths away from switching nodes. The receiver enable and driver enable inputs require deliberate control so that the bus is not driven when multiple transmitters could become active simultaneously.

For component selection, compare the ADM3485EARZ against the MAX3485EESA+, ST3485EBDR, ISL83491IBZ, and LTC2854CDD#PBF when an 8-pin surface-mount RS-485/RS-422 transceiver is required. Verify supply voltage, maximum data rate, ESD rating, shutdown behavior, enable polarity, and exact pin assignment before approving any replacement for an existing design.

بدائل مباشرة لـ ADM3485EARZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADM3485EARZ (نفس عامل الشكل والبصمة) — يختلف في Package, Supply Voltage, Product Type, Data Rate, Duplex.

Analog Devices
Data Rate: 12 Mbps
قارن مع ADM3485EARZ →
Renesas Electronics
Package: 8-SOIC (IB) 3.9 mm
Data Rate: 10 Mbps
Duplex: Half
قارن مع ADM3485EARZ →
Analog Devices
Supply Voltage: 3.3V
Product Type: 1/1 half-duplex RS-485/RS-422 transceiver
قارن مع ADM3485EARZ →
Texas Instruments
Package: VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD
Product Type: RS-485 / RS-422 Full-Duplex Transceiver
Duplex: Full
قارن مع ADM3485EARZ →
MaxLinear
Package: 8-SOIC (SOIC-8)
Supply Voltage: 3.0 V to 3.6 V
Data Rate: 10 Mbps

MAX3485EESA+

✅ بديل مباشر
Analog Devices
📦 8-SOIC
1/1 half-duplex RS-485/RS-422 transceiver · 3.3V · 12Mbps · 1 driver · 1 receiver · RS-485 and RS-422 · Slew-rate-limited true RS-485/RS-422 · ±15kV per IEC 1000-4-2

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ST3485EBDR

✅ بديل مباشر
📦 8-SOIC
Same 8-SOIC half-duplex interface class; exact data rate, enable polarity, and shutdown behavior require comparison

📋 بديل مرجعي (غير موجود في الكتالوج)

ISL83491IBZ

✅ بديل مباشر
📦 8-SOIC
Listed as a functional equivalent in the 8-pin interface family; maximum data rate and ESD rating differ or remain unconfirmed

📋 بديل مرجعي (غير موجود في الكتالوج)

LTC2854CDD#PBF

✅ بديل مباشر
📦 8-SOIC
Same-manufacturer 8-pin transceiver candidate; exact data rate, fail-safe behavior, and enable configuration require verification

📋 بديل مرجعي (غير موجود في الكتالوج)

ADM3485EARZ المواصفات

Product Type RS-485/RS-422 differential line transceiver
جهد التغذية 3.3 V
Maximum Data Rate 12 Mbps
ESD Protection ±15 kV
Duplex Mode Half-duplex
Communication Standard EIA RS-485 and TIA/EIA RS-422
Bus Configuration Multipoint bus transmission
Driver Enable Control Yes
Receiver Enable Control Yes
Low-Power Operation Yes
العلبة 8-pin SOIC
نوع التركيب Surface mount

دليل تكوين أطراف ADM3485EARZ 8-pin soic

تكوين الأطراف لـ ADM3485EARZ (حزمة 8-pin soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-pin soic لـ ADM3485EARZ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADM3485EARZ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADM3485EARZ مناسب لـ 6 التطبيقs: Industrial Sensor Networks, Factory Automation Equipment, Building Control Networks, Test and Measurement Systems, Data Acquisition Equipment, Remote Monitoring Networks.

🏭

Industrial Sensor Networks

The ADM3485EARZ fits distributed industrial sensor networks that use a 3.3 V controller and balanced RS-485 wiring. Its 12 Mbps maximum data rate supports fast polling of multiple remote nodes, while the half-duplex architecture limits the number of bus-interface signals required at each endpoint. The ±15 kV ESD rating is useful in equipment exposed to electrostatic discharge during installation. Place Y and Z on a coupled pair, terminate the bus at its physical ends, and keep the enable signals controlled so only one node drives the bus at a time.

🏭

Factory Automation Equipment

The ADM3485EARZ can connect motor controllers, I/O modules, and programmable equipment over an RS-485 backbone. A 12 Mbps rated interface provides ample bandwidth for command and status traffic, while separate DE and RE controls support deterministic half-duplex traffic management. Its low-power 3.3 V operation suits compact controller boards, and ±15 kV ESD protection improves resilience in electrically active production environments. Validate termination values against cable impedance and avoid long unprotected stubs, which can create reflections and disturb differential signaling.

🧩

Building Control Networks

The ADM3485EARZ is appropriate for building-automation controllers, room modules, and environmental monitors using a 3.3 V RS-485 network. The 12 Mbps capability provides substantial margin for status polling and configuration updates, while the compact 8-pin SOIC simplifies surface-mount assembly. The documented ±15 kV ESD protection supports use in occupied environments where connector discharge is a concern. Bus biasing, common-mode range, grounding, and cable topology must still be checked against the exact system and environmental requirements.

🔧

Test and Measurement Systems

The ADM3485EARZ can connect laboratory instruments, programmable fixtures, and data-acquisition modules to a 3.3 V controller. Its 12 Mbps rate supports rapid transfer of commands and measurement results over a balanced bus, while half-duplex operation simplifies wiring compared with separate full-duplex channels. The ±15 kV ESD rating provides additional margin around frequently connected test equipment. For long cables or laboratory environments with significant ground-potential differences, verify common-mode limits and consider whether galvanic isolation is required.

🖥️

Data Acquisition Equipment

The ADM3485EARZ supports compact data-acquisition units that exchange sampled data with a host controller over an RS-485 link. The 3.3 V supply requirement aligns with many embedded processors, and the 12 Mbps rate permits efficient transfer of bursts without requiring a separate full-duplex driver and receiver pair. Separate enable inputs provide clear control of bus direction, while ±15 kV ESD protection helps manage connector transients. Configure the controller to enforce turnaround time, bus ownership, and receiver settling before asserting the driver enable signal.

🌐

Remote Monitoring Networks

The ADM3485EARZ is suited to remote environmental, security, and asset-monitoring nodes linked by a low-power 3.3 V controller. Its 12 Mbps rated performance provides ample headroom for short telemetry and command messages, while the half-duplex interface reduces pin count compared with full-duplex alternatives. The ±15 kV ESD protection is useful where equipment may be touched or connected in uncontrolled environments. Use qualified twisted-pair cabling, maintain consistent reference grounds where permitted, and test system behavior with the longest cable and highest node count planned for deployment.

ملخص المنتجات الموصى بها

ADM3485EARZ Analog Devices يُستخدم في: Industrial Sensor Networks, Factory Automation Equipment, Building Control Networks, Test and Measurement Systems, Data Acquisition Equipment, Remote Monitoring Networks MAX3485EESA+ Analog Devices يُستخدم في: Industrial Sensor Networks, Data Acquisition Equipment ST3485EBDR Alternate transceiver candidate يُستخدم في: Factory Automation Equipment, Remote Monitoring Networks ISL83491IBZ Functional transceiver alternative يُستخدم في: Building Control Networks LTC2854CDD#PBF Same-manufacturer interface candidate يُستخدم في: Test and Measurement Systems
What is the ADM3485EARZ?
The ADM3485EARZ is a 3.3 V, low-power, half-duplex differential transceiver for RS-485 and RS-422 communication. According to the Analog Devices ADM3485E product page, it supports data rates up to 12 Mbps, provides ±15 kV ESD protection, and is packaged in an 8-pin SOIC. Separate driver-enable and receiver-enable controls allow a controller to select transmit, receive, or disabled operating states.
What is the maximum data rate of the ADM3485EARZ?
The ADM3485EARZ supports a maximum data rate of 12 Mbps. The Analog Devices ADM3485E datasheet describes it as a low-power, ESD-protected RS-485/RS-422 transceiver operating from a single 3.3 V supply. This rate makes it appropriate for factory equipment, industrial controllers, and test systems that exchange short data bursts over balanced bus wiring.
Where can I download the ADM3485EARZ datasheet PDF?
The official ADM3485E datasheet and product documentation are available through the Analog Devices product page at https://www.analog.com/en/products/adm3485e.html. The ADM3485EARZ ordering information identifies the device as an 8-pin SOIC variant of the ADM3485E family. Use the manufacturer’s pin-description and application tables when assigning PCB nets or checking enable-pin polarity.
Where can I find the ADM3485EARZ pinout?
The ADM3485EARZ pinout is published in the Analog Devices ADM3485E datasheet under the device pin-configuration and pin-description tables. The verified product information identifies the package as 8-pin SOIC. Because the individual terminal assignments are not reproduced in the cited product-page text, use the manufacturer datasheet to confirm every net before fabrication or substitution.
Is the ADM3485EARZ compatible with RS-485 and RS-422 buses?
Yes, the ADM3485EARZ supports both EIA RS-485 and TIA/EIA RS-422 communication. According to the Analog Devices product page, it is designed for balanced data transmission and half-duplex operation on multipoint bus lines. The precise circuit configuration still depends on bus topology, cable length, termination, grounding, and whether fail-safe biasing is required.
What ESD protection does the ADM3485EARZ provide?
The ADM3485EARZ provides ±15 kV ESD protection according to the Analog Devices ADM3485E product information. This protection strengthens the interface against electrostatic discharge during installation and field operation. It does not replace correct bus termination, common-mode protection, grounding, or surge-suppression measures required by the complete industrial system.
How do I use the driver-enable and receiver-enable pins?
Use the driver-enable input to activate the transmitter only while the node owns the bus, and use the receiver-enable input to enable the differential receiver when the node is listening. According to the manufacturer datasheet, the ADM3485E provides separate DE and RE control functions for half-duplex systems. Ensure the firmware cannot enable multiple bus drivers simultaneously.
What can replace the ADM3485EARZ?
The MAX3485EESA+, ST3485EBDR, ISL83491IBZ, and LTC2854CDD#PBF are identified as 8-pin surface-mount transceiver candidates for evaluation as drop-in replacements. Their use still requires verification of exact pin assignments, supply range, data rate, enable polarity, shutdown behavior, and ESD rating. No replacement should be approved solely because it is described as functionally equivalent.
Is the MAX3485EESA+ the same as the ADM3485EARZ?
The MAX3485EESA+ is not the same manufacturer’s MPN, but it is a closely related 3.3 V half-duplex RS-485/RS-422 transceiver candidate in an 8-pin surface-mount package. The cross-reference record identifies it as one of the closest qualified second-source options. Check the manufacturer pin tables and operating specifications before treating it as a drop-in replacement.
ADM3485EARZ vs MAX3485EESA+ - which is better for a 3.3V bus?
The ADM3485EARZ is the preferred choice when its documented 12 Mbps rate, ±15 kV ESD protection, and 3.3 V operation directly match the system requirements. The MAX3485EESA+ is appropriate for second-source evaluation because it is listed among the closest qualified alternatives. A definitive comparison requires checking the exact MAX3485EESA+ data rate, enable logic, shutdown specification, and pin assignment against the required interface.
When should I choose the ADM3485EARZ over another RS-485 transceiver?
Choose the ADM3485EARZ when the design requires a 3.3 V half-duplex RS-485/RS-422 interface, operation up to 12 Mbps, and a documented ±15 kV ESD rating in an 8-pin SOIC package. Its separate enable controls suit systems that need explicit transmit and receive state management. Choose another candidate only when it offers a needed feature or qualification that the ADM3485EARZ does not provide.
Is the ADM3485EARZ suitable for industrial equipment?
The ADM3485EARZ is suitable for many industrial interface applications because it uses a single 3.3 V supply, supports 12 Mbps communication, and includes ±15 kV ESD protection. Its suitability depends on the complete system’s temperature range, isolation requirements, surge exposure, grounding, and regulatory obligations. Use the manufacturer datasheet to verify the exact operating-temperature and compliance limits.
What is the lead time for ADM3485EARZ?
Current lead time and minimum order quantity should be requested through the Request a Quote form on this page. Analog Devices lists the ADM3485 family as production, but production status does not establish a fixed lead time for every quantity. Include the required quantity, target date, and packaging preference in the request so current manufacturing and logistics information can be confirmed.
Where can I buy ADM3485EARZ online?
Use the Request a Quote form on this page to request ADM3485EARZ availability, current commercial terms, and lead time for the quantity you need. The product is identified as an active 8-pin SOIC RS-485/RS-422 transceiver, but inventory and delivery schedules can change independently of lifecycle status. Providing the target quantity and required date enables a current supply response.
Is ADM3485EARZ in stock?
Request current ADM3485EARZ stock and allocation information through the Request a Quote form on this page. The manufacturer identifies the ADM3485 family as production, but lifecycle status alone does not confirm the quantity immediately available for your order. Include the required shipment date and acceptable packaging method with the request for a dependable supply answer.

بيانات مرجعية هندسية لـ ADM3485EARZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADM3485EARZ for a 3.3 V, half-duplex RS-485 or RS-422 interface that requires a documented 12 Mbps rate, ±15 kV ESD protection, and an 8-pin SOIC footprint. Its separate DE and RE controls are useful when firmware must explicitly manage bus direction and receiver state. Consider the MAX3485EESA+ when validating a second-source option for a 3.3 V half-duplex design, but verify its exact data rate, enable logic, and pin assignments. Evaluate the ST3485EBDR for a similarly configured 8-SOIC interface after confirming its specifications against the ADM3485EARZ. Use the ISL83491IBZ only after checking its data rate, ESD rating, and shutdown behavior. The LTC2854CDD#PBF is a same-manufacturer candidate that requires a detailed functional and timing review. For every candidate, confirm supply range, common-mode limits, fail-safe behavior, pin mapping, cable compatibility, and lifecycle requirements before releasing a replacement to production.

المقارنة مع البدائل

المعامل هذا المنتج MAX3485EESA+ ST3485EBDR ISL83491IBZ LTC2854CDD#PBF
Manufacturer Analog Devices Maxim Integrated STMicroelectronics Renesas Electronics Analog Devices
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

أبرز الفروقات

  • 12 Mbps rated operation (مقابلST3485EBDR)
  • ±15 kV ESD protection (مقابلISL83491IBZ)
  • Low-power 3.3 V operation (مقابلMAX3485EESA+)
  • Separate half-duplex enable controls (مقابلLTC2854CDD#PBF)

ملاحظات التصميم

Route the Y and Z conductors as a tightly coupled differential pair, minimize stubs, and use the transceiver ground as the local reference for the interface. Place the transceiver close to the connector so discharge current has a short path into the board grounding system. Keep switching regulators, inductors, and high-current outputs away from the Y and Z traces to minimize differential noise coupling.

Enable the driver only when the node owns the bus, and allow the receiver to settle before returning the interface to receive mode. Use the manufacturer timing information to determine receiver turnaround delays. Applying termination indiscriminately to every node can overload the line driver; termination is normally placed at the two physical ends of the bus, with bias resistors placed at one location when fail-safe biasing is required.

Keep the DE and RE traces away from the differential pair and provide pull-up or pull-down resistors only where the selected control logic requires defined disabled states. Connect the transceiver ground to the interface reference ground through a short, low-impedance path. For cables longer than the laboratory bench, validate the complete topology with the intended cable length, node count, baud rate, and termination arrangement rather than relying only on the nominal 12 Mbps capability.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer and distributor results establish the electrical function, package, and lifecycle context but do not explicitly state the requested compliance outcomes. Compliance must be confirmed from the current manufacturer product documentation or declaration before qualification.

تم التحقق من البيانات في: 2026-11-19 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

adm3485earz datasheet adm3485earz reel7 adm3485 rz-reel ADM3485EARZ datasheet PDF ADM3485EARZ pinout ADM3485EARZ 12Mbps transceiver ADM3485EARZ 3.3V RS-485 ADM3485EARZ ESD protection ADM3485EARZ equivalent ADM3485EARZ replacement ADM3485EARZ vs MAX3485EESA+ ADM3485EARZ 8-SOIC ADM3485EARZ industrial bus ADM3485EARZ price ADM3485EARZ stock

المكونات والمصطلحات ذات الصلة

Analog Devices ADM3485EARZ ADM3485E MAX3485EESA+ ST3485EBDR ISL83491IBZ LTC2854CDD#PBF RS-485 transceiver RS-422 transceiver differential line transceiver half-duplex interface multipoint bus interface IC 3.3 V power supply 12 Mbps data rate ±15 kV ESD protection driver enable receiver enable 8-pin SOIC surface-mount package industrial automation building controls data acquisition TIA/EIA RS-422 TIA/EIA RS-485
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر