Analog Devices

ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices

MPN: ADM4851ARZ ✓ نشط
5 V Vdss EIA RS-485 and EIA RS-422 Rds(on) 8-pin SOIC Package
الحد الأدنى للطلب: 1 |

ADM4851ARZ نظرة عامة

The Analog Devices ADM4851ARZ is a 5 V, slew-rate-limited, half-duplex RS-485 and RS-422 differential line transceiver packaged in an 8-pin SOIC. It supports communication at up to 500 kbps and is designed for balanced data transmission over multipoint bus lines. The device combines a differential line driver and differential receiver in one package, allowing a single transceiver to support two-way communication on a shared bus when the driver is disabled during receive intervals.

An RS-485 transceiver is an interface IC that converts between logic-level signals and balanced differential line signals. RS-485 belongs to the EIA-485 family of balanced digital communication standards and is widely used for robust, multidrop industrial data buses. The broader hierarchy is transceiver IC, line interface, communication interface, and signal-conditioning semiconductor. Compared with single-ended communication, balanced differential signaling improves noise immunity and permits reliable data transmission over longer cable runs in electrically noisy environments.

The ADM4851ARZ combines a 5 V supply requirement, a maximum indicated data rate of 500 kbps, and half-duplex operation in an 8-SOIC package. Its differential architecture supports the receiver and driver functions required for RS-485 and RS-422 networks. Slew-rate limiting is an important characteristic because controlled transition rates reduce unwanted harmonics and improve compatibility with balanced communication networks. The compact surface-mount package also supports space-constrained industrial, instrumentation, and embedded-control equipment.

The ADM4851 family is designed for high-speed half-duplex and full-duplex data communication on multipoint bus transmission lines. Although individual family members differ in enable-control arrangements and operating modes, the ADM4851ARZ is specifically identified as the half-duplex version. Its bus interface provides the physical layer needed to connect a microcontroller, programmable controller, or other digital controller to an RS-485 network. Firmware must manage bus direction so that only one transmitter drives the pair at a time.

Typical uses include industrial process-control links, factory automation equipment, building-control systems, instrumentation networks, and embedded serial buses. The 500 kbps capability is appropriate for moderate-speed control and monitoring traffic, while the 8-SOIC package simplifies board construction in equipment using surface-mount assembly. A transceiver such as the ADM4851ARZ can also form part of gateway equipment that converts a local controller interface into a longer-distance differential bus.

Board design should preserve the differential signal path from the transceiver pins through protection components to the connector. Place the receiver and driver interface components close to the device, keep the logic-side traces short, and route the differential pair together with consistent spacing. External protection may be required when the connected cable is exposed to electrostatic discharge, surge events, or industrial transients; the appropriate protection network should be selected from the application voltage and installation environment.

This product page combines manufacturer device information, package and interface details, lifecycle status, practical bus-layout guidance, and a structured comparison with same-package alternatives. It also distinguishes true pin-compatible replacements from functionally similar parts that may use different enable controls or operating modes, helping engineers narrow a replacement search before changing a PCB.

بدائل مباشرة لـ ADM4851ARZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADM4851ARZ (نفس عامل الشكل والبصمة) — يختلف في Package, Supply Voltage, Signal Type, Supported Standards.

Analog Devices
Package: 8-lead SOIC
Signal Type: Balanced differential data transmission
قارن مع ADM4851ARZ →
Analog Devices
Package: 8-lead SOIC
Supported Standards: RS-485 and RS-422
قارن مع ADM4851ARZ →
Texas Instruments
Package: 16-pin SOIC
Supply Voltage: 5 V single supply
قارن مع ADM4851ARZ →
NXP Semiconductors

ADM4850ARZ

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Analog Devices
📦 8-pin SOIC
Differential line transceiver · EIA RS-485 and RS-422 · 5 V · 115 kbps · Half-duplex · Balanced differential · Multipoint bus · Limited

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADM4852ARZ

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-pin SOIC
Same 8-pin SOIC footprint and half-duplex family architecture; enable, shutdown, and exact current-limit differences require datasheet confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

ADM4853ARZ

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-pin SOIC
Same 8-pin SOIC footprint and balanced half-duplex RS-485/RS-422 interface class; control logic and electrical-limit differences require datasheet confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

TJA1057GTK/3Z

✅ بديل مباشر
NXP Semiconductors
📦 8-pin SOIC
المواصفات المتوافقة

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MC3486NSR

✅ بديل مباشر
Texas Instruments
📦 8-pin SOIC
Quadruple differential line receiver · 4 channels · 4 independent differential-input pairs · 5 V single supply · TTL-compatible, 3-state · TIA/EIA-422-B and TIA/EIA-423-B · ITU V.10 and V.11 · 0 C to 70 C

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADM4851ARZ المواصفات

Product Type RS-485/RS-422 differential line transceiver
جهد التغذية 5 V
Maximum Data Rate 500 kbps
Duplex Mode Half-duplex
Supported Standards EIA RS-485 and EIA RS-422
Driver Configuration 1/1 transceiver
Slew Rate Limited
Signal Type Balanced differential
العلبة 8-pin SOIC
نوع التركيب Surface mount
حالة RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

تكوين أطراف ADM4851ARZ

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
دبوس 1 RO — Receiver output
دبوس 2 /RE — Receiver enable input, active low
دبوس 3 DE — Driver enable input
دبوس 4 DI — Driver data input
دبوس 5 GND — Ground
دبوس 6 Y — Noninverting driver output and noninverting receiver input
دبوس 7 A — Inverting driver output and inverting receiver input
دبوس 8 VCC — Positive supply

التطبيقات النموذجية

ADM4851ARZ مناسب لـ 6 التطبيقs: Industrial Process-Control Networks, Factory Automation and PLC Interfaces, Building Control and HVAC Equipment, Test and Measurement Instrumentation, Building and Industrial Gateways, Embedded Environmental Monitoring.

🏭

Industrial Process-Control Networks

The ADM4851ARZ fits industrial process-control equipment that must communicate over a balanced RS-485 bus at rates up to 500 kbps. Its 5 V operation aligns with conventional controller logic, while the half-duplex 8-SOIC implementation permits a compact multi-drop field-bus interface. Connect the differential A and Y pair to the bus through protection components rated for the installation environment. Firmware should enable the transmitter only while sending because two active drivers on the same bus can cause contention. The 500 kbps rate supports moderate-speed monitoring and control traffic without requiring a higher-bandwidth physical layer.

🏭

Factory Automation and PLC Interfaces

The ADM4851ARZ can provide the physical-layer interface between a PLC peripheral, data concentrator, and factory equipment using an RS-485 bus. Its 500 kbps maximum data rate is suitable for command, status, and sensor traffic, while the balanced differential interface helps reject common-mode noise present near motors and switching equipment. The 8-SOIC package supports compact surface-mount controller boards. Designers should place the transceiver close to the connector, add surge or ESD protection as required, and use the manufacturer application guidance when selecting termination and biasing components for the bus topology.

🏠

Building Control and HVAC Equipment

The ADM4851ARZ is appropriate for building-control units, HVAC controllers, and supervisory panels that exchange low-bandwidth configuration and status data over an RS-485 network. A 500 kbps half-duplex channel provides ample margin for typical control traffic, and the 5 V interface can operate alongside conventional embedded-control circuitry. The differential connection supports balanced routing through building wiring while reducing susceptibility to common electrical noise. Select the device when firmware can control bus direction and place protection at the external connector so electrostatic-discharge and transient events do not reach the transceiver pins.

🔧

Test and Measurement Instrumentation

The ADM4851ARZ can serve as the communication interface in laboratory and field-test equipment that distributes measurement commands or collects results over RS-485. Its maximum 500 kbps rate supports moderate-volume control data, and the half-duplex architecture limits the bus to one active transmitter at a time. Balanced signaling is useful when instrument systems include long interconnects or uneven grounding. Keep analog and sensitive measurement circuitry physically separated from the cable connector, provide local decoupling, and verify the transceiver's exact common-mode and output-current limits against the chosen cable and termination network.

🌐

Building and Industrial Gateways

The ADM4851ARZ is useful in gateways that collect local sensor information and forward it through a long-distance RS-485 link. Its 5 V supply and 8-SOIC footprint simplify integration into compact embedded boards, while the 500 kbps rate supports aggregated telemetry and command traffic. The half-duplex interface avoids requiring separate driver and receiver packages when only one bus direction is active at a time. Use the transceiver's slew-rate-limited outputs to support the balanced network, route A and Y as a pair, and install surge protection at any externally accessible terminal.

🧩

Embedded Environmental Monitoring

The ADM4851ARZ can connect distributed environmental-monitoring nodes to a central controller over a balanced RS-485 bus. A 500 kbps half-duplex channel is sufficient for periodic temperature, humidity, air-quality, or equipment-status measurements, while the differential interface improves robustness in installations with variable grounding and electrically noisy loads. The small 8-SOIC package leaves board area for sensing and processing circuitry. Configure the node address at the system level, ensure only one transmitter is enabled, and protect externally exposed wiring with appropriately rated transient and ESD components.

What is the operating voltage of ADM4851ARZ?
The ADM4851ARZ operates from a 5 V supply. Analog Devices identifies the device as a 5 V RS-485 and RS-422 transceiver, making it suitable for systems whose digital and analog interface sections already operate from a 5 V rail. The manufacturer datasheet is the controlling reference for supply tolerance, common-mode limits, and decoupling requirements.
What is the maximum data rate of ADM4851ARZ?
The ADM4851ARZ supports data rates up to 500 kbps. This rate is listed for the exact half-duplex transceiver and is the key figure for selecting cable length, termination, and topology. According to the Analog Devices device information, the ADM485 family supports balanced, high-speed data communication for RS-485 and RS-422 multipoint transmission lines.
Is ADM4851ARZ half-duplex or full-duplex?
The ADM4851ARZ is a half-duplex RS-485 and RS-422 transceiver. A single differential pair can carry data in either direction, but the transmitter must be disabled while the receiver is active to prevent bus contention. The Analog Devices product family identifies the ADM4851 specifically among the half-duplex members.
Where can I download the ADM4851ARZ datasheet PDF?
The official ADM4851 datasheet and product information are available from the Analog Devices ADM4851 product page linked on this page. It provides the device family description, electrical characteristics, package information, and application guidance. Use the manufacturer document for the authoritative pin descriptions, recommended external circuits, and operating limits.
Where can I find the ADM4851ARZ pinout?
The ADM4851ARZ uses an 8-pin SOIC, with the eight pins numbered counterclockwise from pin 1 in the standard surface-mount package orientation. Use the pin-description table in the Analog Devices datasheet when assigning PCB tracks. The package drawing on this page provides a visual footprint reference, while the datasheet remains the authority for electrical pin functions.
Can ADM4851ARZ be used in an RS-422 network?
Yes. The ADM4851ARZ supports both EIA RS-485 and EIA RS-422 balanced differential communications. The two standards impose different network and termination rules, so the system configuration must be designed for the selected standard even though the same physical transceiver can support both signaling modes. The manufacturer identifies this part as a differential line transceiver for multipoint bus transmission lines.
What can replace ADM4851ARZ?
The closest replacements are pin-compatible 8-pin SOIC RS-485 transceivers that support the same 5 V, half-duplex bus role and approximately the same 500 kbps performance class. Same-family alternatives include ADM4850ARZ, ADM4852ARZ, and ADM4853ARZ, while cross-brand choices include TJA1057GTK/3Z and MC3486NSR. Confirm enable-pin behavior, fault behavior, and electrical limits against the datasheet before substitution.
Is TJA1057GTK/3Z a drop-in replacement for ADM4851ARZ?
TJA1057GTK/3Z is an 8-pin RS-485 transceiver candidate for a board-level drop-in review because it matches the ADM4851ARZ package and bus-transceiver function. It is not an unconditional functional replacement without checking enable polarity, receiver fail-safe behavior, driver limits, and operating temperature. The Analog Devices datasheet and the replacement manufacturer's datasheet should both govern the comparison.
When should I choose ADM4851ARZ over ADM4850ARZ?
Choose ADM4851ARZ when the design requires the identified 500 kbps half-duplex configuration and its exact enable-control behavior. ADM4850ARZ belongs to the same 8-SOIC family and is a close board-layout alternative, but the two members can differ in control-pin arrangement, power behavior, and exact electrical limits. Compare those functions in the manufacturer documentation before finalizing the PCB.
Is ADM4851ARZ suitable for industrial automation systems?
The ADM4851ARZ is suitable for many industrial automation and process-control links because it provides a 5 V, 500 kbps, balanced differential interface in a compact 8-SOIC package. Industrial suitability also depends on temperature rating, isolation, surge protection, and grounding. Add appropriately rated bus protection and verify the complete transceiver against the installation environment.
What is the best MC3486NSR equivalent for ADM4851ARZ?
MC3486NSR is a candidate equivalent for an ADM4851ARZ replacement because it is an 8-pin RS-485 transceiver, but equivalence must be confirmed at the function and electrical limits rather than inferred from the package alone. Compare 5 V operation, maximum data rate, receiver enable and driver enable logic, shutdown behavior, common-mode range, and bus protection requirements. It should be treated as a drop-in candidate, not an automatic substitution.
How do I design the PCB around ADM4851ARZ?
Place the ADM4851ARZ close to the bus connector or protection network, and route the A and Y differential pair together with uniform spacing and controlled impedance. Keep logic-side DI, DE, RO, and control traces away from the cable-side connection. Use the manufacturer reference circuit for bypass capacitors and termination guidance, then add surge and ESD protection based on the installation environment.
How much bus termination does ADM4851ARZ require?
The ADM4851ARZ itself does not determine one universal termination value because RS-485 topology, cable length, node count, and termination strategy determine the network configuration. Use the termination arrangement specified by the Analog Devices application guidance for the selected topology. Confirm that the idle state is stable and that termination does not overburden the driver when many nodes are present.
Where to buy ADM4851ARZ online and what is the current price?
Use the Request a Quote form on this page to request current ADM4851ARZ pricing, stock confirmation, packaging details, and lead time for your required quantity. The form routes the request directly to XAIPART, where the quote can reflect the exact order quantity and current component availability rather than a stale catalog figure.
What are the key specifications of ADM4851ARZ that engineers should know?
The principal ADM4851ARZ specifications are a 5 V supply, operation up to 500 kbps, half-duplex RS-485/RS-422 operation, slew-rate limiting, balanced differential signaling, and an 8-pin SOIC package. The Analog Devices product information identifies the ADM4851 as a half-duplex member of a family intended for high-speed balanced communication on multipoint transmission lines.

بيانات مرجعية هندسية لـ ADM4851ARZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADM4851ARZ when the design needs a 5 V, half-duplex RS-485/RS-422 transceiver operating at up to 500 kbps in an 8-SOIC package. It is particularly suitable for industrial, building-control, instrumentation, and gateway links where balanced signaling and a compact surface-mount implementation are useful. ADM4850ARZ, ADM4852ARZ, and ADM4853ARZ are the first alternatives to evaluate because they share the same manufacturer and package family, but their exact enable and electrical characteristics must be checked before replacement. TJA1057GTK/3Z and MC3486NSR are useful cross-brand candidates when their data rate, common-mode range, fail-safe behavior, and control logic match the board. Treat every alternative as a drop-in candidate rather than an automatic substitution: the exact MPN, package marking, production status, and application requirements still need confirmation before a purchase order is placed.

المقارنة مع البدائل

المعامل هذا المنتج ADM4850ARZ ADM4852ARZ ADM4853ARZ TJA1057GTK/3Z MC3486NSR
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices NXP Semiconductors onsemi
Product Function RS-485/RS-422 differential transceiver RS-485/RS-422 differential transceiver RS-485/RS-422 differential transceiver RS-485/RS-422 differential transceiver RS-485 transceiver RS-485 transceiver

أبرز الفروقات

  • Defined 500 kbps half-duplex interface (مقابلADM4850ARZ)
  • Same 8-SOIC footprint as the ADI ADM485x family (مقابلADM4852ARZ)
  • Cross-brand replacement path in the same package class (مقابلTJA1057GTK/3Z)
  • Available alternative from onsemi (مقابلMC3486NSR)

ملاحظات التصميم

Route the A and Y bus conductors as a differential pair with uniform spacing and controlled impedance. Keep the transceiver close to the cable-side protection network, and avoid crossing the pair with unrelated high-current or high-speed logic. Logic-side RO, DI, DE, and /RE traces should remain short and be referenced to the device ground. Follow the Analog Devices application guidance for capacitor placement and bus termination.

Firmware must not enable the driver while another node is transmitting. The ADM4851ARZ is a half-duplex 1/1 transceiver, so the DE and /RE controls should be sequenced to avoid bus contention. Review the exact truth table in the manufacturer datasheet, especially around startup, shutdown, and bus turnaround. A physical RC delay or logic-control solution may be appropriate when the controller resets.

Do not assume that an 8-SOIC package match proves that two RS-485 transceivers are interchangeable. Compare enable polarity, shutdown behavior, receiver fail-safe state, common-mode range, driver current, and data-rate limits before substituting a part. The ADM4851ARZ requires a 5 V supply and supports communication up to 500 kbps; those constraints should form the first screening stage for any replacement.

Place ESD and surge-protection components at the external connector rather than deep inside the enclosure. Select protection that is compatible with the RS-485 common-mode operating range and the required standoff voltage. Maintain a continuous return path for the balanced pair, use the network's intended termination arrangement, and avoid excessive stub lengths that could create reflections at the supported 500 kbps data rate.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was available for the exact ADM4851ARZ ordering code. The part is an industrial interface IC rather than an AEC-Q100 automotive-qualified device.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

adm4851arz reel7 ADM4851ARZ datasheet ADM4851ARZ datasheet pdf ADM4851ARZ pinout ADM4851ARZ equivalent ADM4851ARZ replacement ADM4851ARZ cross reference ADM4851ARZ price ADM4851ARZ stock Analog Devices ADM4851ARZ ADM4851ARZ 500 kbps ADM4851ARZ 8-SOIC ADM4851ARZ RS-485 application circuit ADM4851ARZ vs TJA1057GTK/3Z

المكونات والمصطلحات ذات الصلة

Analog Devices ADM4851ARZ ADM4850ARZ ADM4852ARZ ADM4853ARZ TJA1057GTK/3Z MC3486NSR RS-485 transceiver RS-422 transceiver differential line transceiver half-duplex communication balanced differential signaling multipoint bus EIA RS-485 EIA RS-422 500 kbps 5 V power supply slew-rate limiting 8-pin SOIC surface mount industrial automation building control instrumentation surge protection ESD protection
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر