ADM4851ARZ vs MC3486NSR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM4851ARZ بواسطة Analog Devices و MC3486NSR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ نشطTexas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ نشطمقارنة المواصفات
| المعامل | ADM4851ARZ | MC3486NSR |
|---|---|---|
| العلامة التجارية | Analog Devices | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| جهد التغذية | 5 V | 5 V single supply |
| Maximum Data Rate | 500 kbps | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | — |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| العلبة | 8-pin SOIC | 16-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| تيار التغذية | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| تيار الإيقاف | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| حالة RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Receiver Type | — | Quadruple differential line receiver |
| Number of Receiver Channels | — | 4 channels |
| Independent Differential Inputs | — | 4 independent differential-input pairs |
| نوع الخرج | — | TTL-compatible, 3-state |
| Input Standard Compatibility | — | TIA/EIA-422-B and TIA/EIA-423-B |
| ITU Recommendation Compatibility | — | ITU V.10 and V.11 |
| Device Type | — | Line receiver |
| Logic Compatibility | — | TTL-compatible |
| High-Impedance Output State | — | Available through 3-state output circuitry |
| Recommended Companion Driver | — | MC3487 family |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |