Analog Devices

ADV3002XSTZ-RL - 4:1 HDMI/DVI Switch | Analog Devices

MPN: ADV3002XSTZ-RL ✗ انتهى عمره الإنتاجي
EDID replication Id
الحد الأدنى للطلب: 1 |

ADV3002XSTZ-RL نظرة عامة

The Analog Devices ADV3002XSTZ-RL is a 4:1 HDMI/DVI switch with equalization, bidirectional DDC and CEC buffering, and EDID replication in an LQFP package. It is designed to route multiple high-definition audiovisual sources while supporting long cable runs and control-bus communication over the I2C interface. The device supports HDMI 1.4a signaling and is identified by Analog Devices as a video switch IC.

An HDMI/DVI switch is a signal-routing integrated circuit that selects one of several video sources for a display or other HDMI-capable sink. Supporting equalized TMDS inputs helps preserve signal integrity when cables are longer than ideal. DDC buffering separates the display data channel, while CEC buffering allows consumer-control traffic to travel with the selected video path. These functions place the ADV3002 between source connectors and a downstream HDMI receiver.

The principal feature of the ADV3002XSTZ-RL is its 4:1 switching ratio. A four-input architecture can consolidate several source devices into one display connection without requiring a separate external switch for each signal type. Integrated equalization addresses attenuation in longer cable runs, while the DDC and CEC buffers support control traffic associated with connected consumer-electronics equipment. EDID replication allows one EDID EEPROM to support the replicated display interface.

The ADV3002 family also includes configurable input equalization, a feature intended to improve transition-minimized differential signaling performance across different cable lengths. The buffered DDC path is bidirectional, which allows source-side EDID information to be read by the connected display. The CEC line includes integrated pull-up resistors, reducing the need for external pull-up components in a correctly designed CEC interface.

Typical uses include professional presentation systems, conference-room displays, digital-signage installations, video-conference equipment, and multi-source audiovisual racks. These systems benefit from centralized source selection, especially when computers, media players, and other sources feed a common large display. The device is also relevant to control-room and monitoring arrangements where long HDMI runs are common.

Layout should preserve the high-speed TMDS and DDC signal paths, keep connector and protection-device stubs short, and follow the manufacturer’s recommended reference layout. Because the ADV3002 is not recommended for new designs, existing designs should first confirm whether a newer interface switch better matches the required input count, HDMI version, control functions, and lifecycle expectations.

This page consolidates the documented functional characteristics, sourcing information, lifecycle caution, and engineering trade-offs of the ADV3002XSTZ-RL. It distinguishes confirmed switch, equalization, DDC, CEC, and EDID functions from parameters that require confirmation from the manufacturer datasheet before layout or qualification decisions are finalized.

بدائل مباشرة لـ ADV3002XSTZ-RL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADV3002XSTZ-RL (نفس عامل الشكل والبصمة) — يختلف في CEC Support, Control Interface, Product Type.

Analog Devices
CEC Support: Bidirectional CEC buffering with integrated pull-up resistors
Control Interface: I2C/serial
Product Type: 4:1 HDMI/DVI video switch
قارن مع ADV3002XSTZ-RL →

ADV3002XSTZ

✅ بديل مباشر
Analog Devices
📦 [DATA_NEEDED: exact package designation]
4:1 HDMI/DVI video switch · 4 · 1.4a · Integrated TMDS equalization · Bidirectional DDC buffering · Bidirectional CEC buffering with integrated pull-up resistors · EDID replication · I2C/serial

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADV3002XSTZ-RL الحدود القصوى والخصائص الكهربائية

Product Type 4:1 HDMI/DVI switch
Number of Video Inputs 4 inputs
Video Output Configuration 1 switched output
Supported HDMI Version HDMI 1.4a
DVI Support Yes
Input Equalization Integrated equalized TMDS inputs
DDC Support Bidirectional DDC buffering
CEC Support Bidirectional CEC line buffering
CEC Pull-Up Resistors Integrated
EDID Function EDID replication
Control Interface I2C
Lifecycle Recommendation Not recommended for new designs

دليل تكوين أطراف ADV3002XSTZ-RL standard

تكوين الأطراف لـ ADV3002XSTZ-RL (حزمة standard). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة standard لـ ADV3002XSTZ-RL

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADV3002XSTZ-RL.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADV3002XSTZ-RL مناسب لـ 6 التطبيقs: Conference Room Video Switching, Professional Presentation Systems, Digital Signage and Video Walls, Video Conferencing Systems, Home Theater Source Selection, Control Room and Monitoring Systems.

📺

Conference Room Video Switching

The ADV3002XSTZ-RL fits conference-room installations where laptops, room computers, and media players share a wall display. Its 4:1 architecture provides one selected video output while equalized TMDS inputs help support cables that run behind walls or furniture. Bidirectional DDC and CEC buffering maintains display-data and consumer-control communication across the selected path. One EDID EEPROM can also be replicated for the switched interface, reducing the need for separate identification storage at every source.

📺

Professional Presentation Systems

Professional presentation systems benefit from centralizing four source connections in the ADV3002XSTZ-RL while keeping the display connection consistent. Integrated equalization supports long HDMI cable runs commonly encountered between a lectern, ceiling projector, or wall-mounted display and the central switching location. DDC and CEC buffering preserves auxiliary communication with the selected sink, while EDID replication can simplify identification of the display from multiple connected source devices.

🖥️

Digital Signage and Video Walls

The ADV3002XSTZ-RL can serve as a four-source routing element in digital-signage and video-wall control systems. Its equalized TMDS inputs are useful where display controllers, media players, and monitoring feeds connect through longer system cables. Bidirectional DDC buffering allows the selected display to exchange identification data with the source, and EDID replication supports consistent display information handling. For always-on installations, confirm operating-temperature and lifecycle requirements before committing to the NRND device.

🌐

Video Conferencing Systems

Video-conferencing installations commonly combine a room computer, camera controller, media source, and local display. The ADV3002XSTZ-RL gives these systems a four-input HDMI/DVI routing point and can equalize attenuated TMDS links created by longer in-room cabling. DDC and CEC buffering allows control information to accompany the selected display path, while EDID replication supports monitor recognition. Firmware-level source negotiation must still be validated because switching behavior belongs to the surrounding system.

🎧

Home Theater Source Selection

The ADV3002XSTZ-RL can consolidate several HDMI or DVI sources in an audiovisual rack or cabinet. Equalized inputs help maintain link performance where the selected source is separated from the television or display by a longer cable. DDC and CEC buffering supports display metadata and consumer-control functions, and EDID replication can make a shared display configuration easier to manage. Because the ADV3002 is not recommended for new designs, it is best suited to sustaining an existing installation rather than building a new product platform.

🖥️

Control Room and Monitoring Systems

Control-room and monitoring systems often route several workstation, camera, or test-video outputs to a common display. The ADV3002XSTZ-RL provides a four-to-one routing function with equalization designed for long cable runs. Bidirectional DDC and CEC buffers isolate control traffic from the high-speed switching path, while EDID replication assists display identification across multiple source connections. Mission-critical installations should verify lifecycle availability, temperature range, and any required qualification independently.

What is the ADV3002XSTZ-RL?
The ADV3002XSTZ-RL is a 4:1 HDMI/DVI switch with integrated input equalization, bidirectional DDC and CEC buffers, and EDID replication. According to the Analog Devices ADV3002 product page, it routes four high-definition audiovisual sources and is intended for systems that include long HDMI cable runs. The device uses I2C for configuration and supports HDMI 1.4a signaling.
How many HDMI inputs does the ADV3002XSTZ-RL support?
The ADV3002XSTZ-RL supports four HDMI or DVI video inputs and provides one selected output path. The manufacturer describes the ADV3002 as a complete HDMI/DVI link switch with equalized TMDS inputs. This four-to-one arrangement is useful when multiple computers, media players, or other sources must connect through one display input without external switch boxes.
What does the equalization function do in the ADV3002XSTZ-RL?
The integrated equalization compensates for signal attenuation in transition-minimized differential signaling links, helping preserve performance over longer HDMI cable runs. According to the Analog Devices ADV3002 product page, the equalized inputs are intended for systems with long cables. The appropriate equalization setting should be selected using the manufacturer’s guidance for the actual source, sink, and cable arrangement.
Does the ADV3002XSTZ-RL support DDC and CEC?
Yes, the ADV3002XSTZ-RL includes bidirectional buffering for both DDC and CEC. According to the Analog Devices product page, the CEC line also incorporates integrated pull-up resistors. DDC buffering supports display-data communication, while CEC buffering carries consumer-control information associated with the selected audiovisual path.
What is the EDID replication feature in the ADV3002XSTZ-RL?
EDID replication lets one EDID EEPROM represent the display information required by the switched HDMI interface. According to the Analog Devices ADV3002 description, this function avoids requiring a separate EDID EEPROM for every source or sink combination. Designers should still verify signal timing, monitor identification, and control behavior in the complete source-to-display system.
Where can I download the ADV3002XSTZ-RL datasheet PDF?
The official ADV3002 datasheet and product documentation are available from the Analog Devices ADV3002 product page at https://www.analog.com/en/products/adv3002.html. The manufacturer page identifies the device as a 4:1 HDMI/DVI switch with equalization, DDC and CEC buffers, and EDID replication. Use the data-sheet link on that page for the complete package, pin, electrical, and recommended-application details.
Where can I find the ADV3002XSTZ-RL pinout?
The ADV3002XSTZ-RL pinout is found in the pin-description table and package drawing in the Analog Devices ADV3002 manufacturer datasheet. The official documentation is available from https://www.analog.com/en/products/adv3002.html. Use the manufacturer’s pin table for PCB routing, exposed-pad treatment, power connections, control inputs, and signal assignments rather than relying on secondary pinout diagrams.
Is the ADV3002XSTZ-RL suitable for a long HDMI cable run?
The ADV3002XSTZ-RL is specifically designed to support equalized TMDS inputs for systems with long cable runs. Its integrated input equalization can compensate for attenuation introduced by longer HDMI cables, while DDC and CEC buffering protects the associated control paths. Actual reach depends on cable quality, source output, sink performance, data rate, and the equalization configuration.
Where can I buy the ADV3002XSTZ-RL?
The ADV3002XSTZ-RL can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current stock, minimum order quantity, lead time, and lot-specific availability. The manufacturer identifies the ADV3002 family as not recommended for new designs, so existing-production users should confirm lifecycle and sourcing conditions when submitting a request.
What is the price of the ADV3002XSTZ-RL?
Current commercial pricing for the ADV3002XSTZ-RL should be obtained through the Request a Quote form on this page. The form provides the latest product-specific quote rather than a static price that can become obsolete. Because Analog Devices marks the ADV3002 as not recommended for new designs, buyers should also state their annual usage, target package, and required lifecycle when requesting confirmation.
What is the lead time and stock status for the ADV3002XSTZ-RL?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this XAIPART page. The ADV3002 is marked by the manufacturer as not recommended for new designs, so supply can be constrained for programs that are not already supported. Providing the forecast quantity and production schedule helps suppliers confirm whether an available lot matches the required delivery plan.
What is the best drop-in replacement for the ADV3002XSTZ-RL?
No independently verified drop-in replacement for the ADV3002XSTZ-RL is identified in the available cross-reference results. The non-reel ADV3002XSTZ ordering code appears in connection with the same device family, but changing its shipment form is not an engineering replacement and may affect handling. A valid replacement must match the exact package, pinout, equalization, DDC, CEC, EDID, and control behavior.
Can the ADV3002XSTZ be used instead of the ADV3002XSTZ-RL?
The ADV3002XSTZ and ADV3002XSTZ-RL identify different ordering forms of the ADV3002 family, so the electrical distinction must be checked before substitution. The available product records associate ADV3002XSTZ with the same 4:1 HDMI/DVI switching function. Do not treat the suffix difference as a drop-in qualification without confirming reel orientation, packaging details, and traceability requirements.
When should I choose the ADV3002XSTZ-RL instead of a newer HDMI switch?
Choose the ADV3002XSTZ-RL primarily when maintaining an existing qualified design that requires a four-input HDMI/DVI switch, integrated equalization, bidirectional DDC and CEC buffering, and EDID replication. For a new design, select a current switch after comparing input count, supported HDMI version, control interface, cable reach, EDID behavior, package, and lifecycle status. The manufacturer’s not-recommended-for-new-designs status is the decisive constraint.
Is the ADV3002XSTZ-RL suitable for presentation and digital-signage systems?
The ADV3002XSTZ-RL fits presentation and digital-signage systems that need four source connections, long-run equalization, and buffered DDC or CEC control. Its 4:1 topology reduces the number of external video switches, while EDID replication supports display identification from a shared source arrangement. For safety-critical signage, confirm environmental ratings and serviceability requirements before deployment.
What are the key specifications of the ADV3002XSTZ-RL that engineers should know?
The key confirmed specifications are a 4:1 switching ratio, HDMI 1.4a support, DVI compatibility, integrated equalization, bidirectional DDC and CEC buffering, integrated CEC pull-ups, and EDID replication. The Analog Devices product page also states that the ADV3002 is not recommended for new designs. Supply voltage, operating temperature, exact package dimensions, and maximum data rate must be confirmed from the manufacturer datasheet.
What is the best Analog Devices equivalent for the ADV3002XSTZ-RL?
No verified Analog Devices or cross-brand equivalent with confirmed pin-to-pin compatibility is available for the ADV3002XSTZ-RL. A replacement must use the same footprint and preserve the 4:1 architecture, input equalization, DDC and CEC buffering, EDID replication, I2C configuration, and required HDMI version. The ADV3002XSTZ ordering code is a packaging-related family member, not a qualified functional substitute.

بيانات مرجعية هندسية لـ ADV3002XSTZ-RL — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADV3002XSTZ-RL when maintaining an existing qualified design requires a four-input HDMI/DVI switch with equalized TMDS inputs, bidirectional DDC and CEC buffering, and EDID replication. The device is particularly useful in presentation, conference-room, control-room, and digital-signage systems where long cable runs and multiple sources are common. Do not select it for a new platform without accounting for the manufacturer’s not-recommended-for-new-designs status. The ADV3002XSTZ ordering code represents the same named family and is documented alongside the reel ordering form, but suffix differences should be checked for packaging and handling requirements. No independently verified cross-brand drop-in equivalent is available, so any migration must begin with a full comparison of package pins, input count, HDMI version, equalization, DDC and CEC behavior, EDID implementation, and control protocol.

المقارنة مع البدائل

المعامل هذا المنتج ADV3002XSTZ
Brand Analog Devices Analog Devices
Input Configuration 4:1 HDMI/DVI switch 4:1 HDMI/DVI switch

أبرز الفروقات

  • Four-source routing in one interface device (مقابلADV3002XSTZ)
  • Integrated control-bus buffering (مقابلADV3002XSTZ)
  • Long-run signal support with EDID replication (مقابلADV3002XSTZ)

ملاحظات التصميم

Treat the TMDS routes as high-speed differential channels. Keep traces short and matched, use the manufacturer’s reference layer stack, and place protection devices close to connectors to minimize parasitic capacitance. Configure input equalization for the actual cable length and source amplitude, then verify eye margin and inter-pair timing at the selected HDMI data rate before production release.

Route DDC and CEC as bidirectional control paths and follow the datasheet guidance for pull-up placement and isolation. The integrated CEC pull-ups should be considered when calculating bus loading. Keep connector stubs short and separate switching or protection-device return currents from the sensitive high-speed paths to reduce crosstalk and common-mode noise.

Do not treat the 4:1 label as confirmation that every source and sink combination is supported. Validate resolution, pixel clock, color format, HDCP behavior, EDID data, DDC exchange, and CEC commands across every required route. Also account for the manufacturer’s not-recommended-for-new-designs lifecycle status when creating a production BOM or planning an obsolescence migration.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The ADV3002 is an interface IC and is not identified as an AEC-Q100-qualified automotive device. Specific environmental and material-compliance declarations were not established from the available product records.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADV3002XSTZ-RL datasheet ADV3002XSTZ-RL pinout ADV3002XSTZ-RL datasheet pdf ADV3002XSTZ-RL HDMI switch ADV3002XSTZ-RL equivalent ADV3002XSTZ-RL replacement ADV3002XSTZ-RL price ADV3002XSTZ-RL stock Analog Devices ADV3002XSTZ-RL ADV3002 4:1 HDMI DVI switch ADV3002 DDC CEC EDID buffering ADV3002 HDMI equalization

المكونات والمصطلحات ذات الصلة

Analog Devices ADV3002XSTZ-RL ADV3002XSTZ ADV3002 4:1 HDMI/DVI switch HDMI switch DVI switch HDMI 1.4a TMDS Transition-Minimized Differential Signaling input equalization DDC buffering CEC buffering EDID replication I2C video processing IC interface IC semiconductor long cable runs digital signage conference room switching NRND
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر