ADV3002XSTZ-RL - 4:1 HDMI/DVI Switch | Analog Devices
MPN: ADV3002XSTZ-RL ✗ اختتامِ زندگیADV3002XSTZ-RL جائزہ
An HDMI/DVI switch is a signal-routing integrated circuit that selects one of several video sources for a display or other HDMI-capable sink. Supporting equalized TMDS inputs helps preserve signal integrity when cables are longer than ideal. DDC buffering separates the display data channel, while CEC buffering allows consumer-control traffic to travel with the selected video path. These functions place the ADV3002 between source connectors and a downstream HDMI receiver.
The principal feature of the ADV3002XSTZ-RL is its 4:1 switching ratio. A four-input architecture can consolidate several source devices into one display connection without requiring a separate external switch for each signal type. Integrated equalization addresses attenuation in longer cable runs, while the DDC and CEC buffers support control traffic associated with connected consumer-electronics equipment. EDID replication allows one EDID EEPROM to support the replicated display interface.
The ADV3002 family also includes configurable input equalization, a feature intended to improve transition-minimized differential signaling performance across different cable lengths. The buffered DDC path is bidirectional, which allows source-side EDID information to be read by the connected display. The CEC line includes integrated pull-up resistors, reducing the need for external pull-up components in a correctly designed CEC interface.
Typical uses include professional presentation systems, conference-room displays, digital-signage installations, video-conference equipment, and multi-source audiovisual racks. These systems benefit from centralized source selection, especially when computers, media players, and other sources feed a common large display. The device is also relevant to control-room and monitoring arrangements where long HDMI runs are common.
Layout should preserve the high-speed TMDS and DDC signal paths, keep connector and protection-device stubs short, and follow the manufacturer’s recommended reference layout. Because the ADV3002 is not recommended for new designs, existing designs should first confirm whether a newer interface switch better matches the required input count, HDMI version, control functions, and lifecycle expectations.
This page consolidates the documented functional characteristics, sourcing information, lifecycle caution, and engineering trade-offs of the ADV3002XSTZ-RL. It distinguishes confirmed switch, equalization, DDC, CEC, and EDID functions from parameters that require confirmation from the manufacturer datasheet before layout or qualification decisions are finalized.
کے لیے ڈراپ اِن متبادل ADV3002XSTZ-RL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADV3002XSTZ-RL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف CEC Support, Control Interface, Product Type.
ADV3002XSTZ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADV3002XSTZ-RL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 4:1 HDMI/DVI switch |
| Number of Video Inputs | 4 inputs |
| Video Output Configuration | 1 switched output |
| Supported HDMI Version | HDMI 1.4a |
| DVI Support | Yes |
| Input Equalization | Integrated equalized TMDS inputs |
| DDC Support | Bidirectional DDC buffering |
| CEC Support | Bidirectional CEC line buffering |
| CEC Pull-Up Resistors | Integrated |
| EDID Function | EDID replication |
| Control Interface | I2C |
| Lifecycle Recommendation | Not recommended for new designs |
ADV3002XSTZ-RL standard پن کنفیگریشن گائیڈ
ADV3002XSTZ-RL (standard پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADV3002XSTZ-RL.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADV3002XSTZ-RL کے لیے موزوں ہے 6 ایپلیکیشنs: Conference Room Video Switching, Professional Presentation Systems, Digital Signage and Video Walls, Video Conferencing Systems, Home Theater Source Selection, Control Room and Monitoring Systems.
Conference Room Video Switching
The ADV3002XSTZ-RL fits conference-room installations where laptops, room computers, and media players share a wall display. Its 4:1 architecture provides one selected video output while equalized TMDS inputs help support cables that run behind walls or furniture. Bidirectional DDC and CEC buffering maintains display-data and consumer-control communication across the selected path. One EDID EEPROM can also be replicated for the switched interface, reducing the need for separate identification storage at every source.
Professional Presentation Systems
Professional presentation systems benefit from centralizing four source connections in the ADV3002XSTZ-RL while keeping the display connection consistent. Integrated equalization supports long HDMI cable runs commonly encountered between a lectern, ceiling projector, or wall-mounted display and the central switching location. DDC and CEC buffering preserves auxiliary communication with the selected sink, while EDID replication can simplify identification of the display from multiple connected source devices.
Digital Signage and Video Walls
The ADV3002XSTZ-RL can serve as a four-source routing element in digital-signage and video-wall control systems. Its equalized TMDS inputs are useful where display controllers, media players, and monitoring feeds connect through longer system cables. Bidirectional DDC buffering allows the selected display to exchange identification data with the source, and EDID replication supports consistent display information handling. For always-on installations, confirm operating-temperature and lifecycle requirements before committing to the NRND device.
Video Conferencing Systems
Video-conferencing installations commonly combine a room computer, camera controller, media source, and local display. The ADV3002XSTZ-RL gives these systems a four-input HDMI/DVI routing point and can equalize attenuated TMDS links created by longer in-room cabling. DDC and CEC buffering allows control information to accompany the selected display path, while EDID replication supports monitor recognition. Firmware-level source negotiation must still be validated because switching behavior belongs to the surrounding system.
Home Theater Source Selection
The ADV3002XSTZ-RL can consolidate several HDMI or DVI sources in an audiovisual rack or cabinet. Equalized inputs help maintain link performance where the selected source is separated from the television or display by a longer cable. DDC and CEC buffering supports display metadata and consumer-control functions, and EDID replication can make a shared display configuration easier to manage. Because the ADV3002 is not recommended for new designs, it is best suited to sustaining an existing installation rather than building a new product platform.
Control Room and Monitoring Systems
Control-room and monitoring systems often route several workstation, camera, or test-video outputs to a common display. The ADV3002XSTZ-RL provides a four-to-one routing function with equalization designed for long cable runs. Bidirectional DDC and CEC buffers isolate control traffic from the high-speed switching path, while EDID replication assists display identification across multiple source connections. Mission-critical installations should verify lifecycle availability, temperature range, and any required qualification independently.
کے لیے انجینئرنگ ریفرنس ڈیٹا ADV3002XSTZ-RL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADV3002XSTZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Input Configuration | 4:1 HDMI/DVI switch | 4:1 HDMI/DVI switch |
اہم امتیازی خصوصیات
- Four-source routing in one interface device (بمقابلہADV3002XSTZ)
- Integrated control-bus buffering (بمقابلہADV3002XSTZ)
- Long-run signal support with EDID replication (بمقابلہADV3002XSTZ)
ڈیزائن نوٹس
Treat the TMDS routes as high-speed differential channels. Keep traces short and matched, use the manufacturer’s reference layer stack, and place protection devices close to connectors to minimize parasitic capacitance. Configure input equalization for the actual cable length and source amplitude, then verify eye margin and inter-pair timing at the selected HDMI data rate before production release.
Route DDC and CEC as bidirectional control paths and follow the datasheet guidance for pull-up placement and isolation. The integrated CEC pull-ups should be considered when calculating bus loading. Keep connector stubs short and separate switching or protection-device return currents from the sensitive high-speed paths to reduce crosstalk and common-mode noise.
Do not treat the 4:1 label as confirmation that every source and sink combination is supported. Validate resolution, pixel clock, color format, HDCP behavior, EDID data, DDC exchange, and CEC commands across every required route. Also account for the manufacturer’s not-recommended-for-new-designs lifecycle status when creating a production BOM or planning an obsolescence migration.
تعمیل کی معلومات
The ADV3002 is an interface IC and is not identified as an AEC-Q100-qualified automotive device. Specific environmental and material-compliance declarations were not established from the available product records.