ADV3002XSTZ-RL - 4:1 HDMI/DVI Switch | Analog Devices
MPN: ADV3002XSTZ-RL ✗ 停產ADV3002XSTZ-RL 概覽
An HDMI/DVI switch is a signal-routing integrated circuit that selects one of several video sources for a display or other HDMI-capable sink. Supporting equalized TMDS inputs helps preserve signal integrity when cables are longer than ideal. DDC buffering separates the display data channel, while CEC buffering allows consumer-control traffic to travel with the selected video path. These functions place the ADV3002 between source connectors and a downstream HDMI receiver.
The principal feature of the ADV3002XSTZ-RL is its 4:1 switching ratio. A four-input architecture can consolidate several source devices into one display connection without requiring a separate external switch for each signal type. Integrated equalization addresses attenuation in longer cable runs, while the DDC and CEC buffers support control traffic associated with connected consumer-electronics equipment. EDID replication allows one EDID EEPROM to support the replicated display interface.
The ADV3002 family also includes configurable input equalization, a feature intended to improve transition-minimized differential signaling performance across different cable lengths. The buffered DDC path is bidirectional, which allows source-side EDID information to be read by the connected display. The CEC line includes integrated pull-up resistors, reducing the need for external pull-up components in a correctly designed CEC interface.
Typical uses include professional presentation systems, conference-room displays, digital-signage installations, video-conference equipment, and multi-source audiovisual racks. These systems benefit from centralized source selection, especially when computers, media players, and other sources feed a common large display. The device is also relevant to control-room and monitoring arrangements where long HDMI runs are common.
Layout should preserve the high-speed TMDS and DDC signal paths, keep connector and protection-device stubs short, and follow the manufacturer’s recommended reference layout. Because the ADV3002 is not recommended for new designs, existing designs should first confirm whether a newer interface switch better matches the required input count, HDMI version, control functions, and lifecycle expectations.
This page consolidates the documented functional characteristics, sourcing information, lifecycle caution, and engineering trade-offs of the ADV3002XSTZ-RL. It distinguishes confirmed switch, equalization, DDC, CEC, and EDID functions from parameters that require confirmation from the manufacturer datasheet before layout or qualification decisions are finalized.
直接替換替代品,適用於 ADV3002XSTZ-RL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADV3002XSTZ-RL (相同外形與佔位) — 差異在於 CEC Support, Control Interface, Product Type.
ADV3002XSTZ
✅ 直接替換聯絡詢價
查看資料表 →ADV3002XSTZ-RL 最大額定值與電氣特性
| Product Type | 4:1 HDMI/DVI switch |
| Number of Video Inputs | 4 inputs |
| Video Output Configuration | 1 switched output |
| Supported HDMI Version | HDMI 1.4a |
| DVI Support | Yes |
| Input Equalization | Integrated equalized TMDS inputs |
| DDC Support | Bidirectional DDC buffering |
| CEC Support | Bidirectional CEC line buffering |
| CEC Pull-Up Resistors | Integrated |
| EDID Function | EDID replication |
| Control Interface | I2C |
| Lifecycle Recommendation | Not recommended for new designs |
ADV3002XSTZ-RL standard 腳位配置指南
ADV3002XSTZ-RL(standard 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADV3002XSTZ-RL.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADV3002XSTZ-RL 適用於 6 應用s: Conference Room Video Switching, Professional Presentation Systems, Digital Signage and Video Walls, Video Conferencing Systems, Home Theater Source Selection, Control Room and Monitoring Systems.
Conference Room Video Switching
The ADV3002XSTZ-RL fits conference-room installations where laptops, room computers, and media players share a wall display. Its 4:1 architecture provides one selected video output while equalized TMDS inputs help support cables that run behind walls or furniture. Bidirectional DDC and CEC buffering maintains display-data and consumer-control communication across the selected path. One EDID EEPROM can also be replicated for the switched interface, reducing the need for separate identification storage at every source.
Professional Presentation Systems
Professional presentation systems benefit from centralizing four source connections in the ADV3002XSTZ-RL while keeping the display connection consistent. Integrated equalization supports long HDMI cable runs commonly encountered between a lectern, ceiling projector, or wall-mounted display and the central switching location. DDC and CEC buffering preserves auxiliary communication with the selected sink, while EDID replication can simplify identification of the display from multiple connected source devices.
Digital Signage and Video Walls
The ADV3002XSTZ-RL can serve as a four-source routing element in digital-signage and video-wall control systems. Its equalized TMDS inputs are useful where display controllers, media players, and monitoring feeds connect through longer system cables. Bidirectional DDC buffering allows the selected display to exchange identification data with the source, and EDID replication supports consistent display information handling. For always-on installations, confirm operating-temperature and lifecycle requirements before committing to the NRND device.
Video Conferencing Systems
Video-conferencing installations commonly combine a room computer, camera controller, media source, and local display. The ADV3002XSTZ-RL gives these systems a four-input HDMI/DVI routing point and can equalize attenuated TMDS links created by longer in-room cabling. DDC and CEC buffering allows control information to accompany the selected display path, while EDID replication supports monitor recognition. Firmware-level source negotiation must still be validated because switching behavior belongs to the surrounding system.
Home Theater Source Selection
The ADV3002XSTZ-RL can consolidate several HDMI or DVI sources in an audiovisual rack or cabinet. Equalized inputs help maintain link performance where the selected source is separated from the television or display by a longer cable. DDC and CEC buffering supports display metadata and consumer-control functions, and EDID replication can make a shared display configuration easier to manage. Because the ADV3002 is not recommended for new designs, it is best suited to sustaining an existing installation rather than building a new product platform.
Control Room and Monitoring Systems
Control-room and monitoring systems often route several workstation, camera, or test-video outputs to a common display. The ADV3002XSTZ-RL provides a four-to-one routing function with equalization designed for long cable runs. Bidirectional DDC and CEC buffers isolate control traffic from the high-speed switching path, while EDID replication assists display identification across multiple source connections. Mission-critical installations should verify lifecycle availability, temperature range, and any required qualification independently.
工程參考資料,適用於 ADV3002XSTZ-RL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADV3002XSTZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Input Configuration | 4:1 HDMI/DVI switch | 4:1 HDMI/DVI switch |
主要差異化特點
- Four-source routing in one interface device (對比ADV3002XSTZ)
- Integrated control-bus buffering (對比ADV3002XSTZ)
- Long-run signal support with EDID replication (對比ADV3002XSTZ)
設計說明
Treat the TMDS routes as high-speed differential channels. Keep traces short and matched, use the manufacturer’s reference layer stack, and place protection devices close to connectors to minimize parasitic capacitance. Configure input equalization for the actual cable length and source amplitude, then verify eye margin and inter-pair timing at the selected HDMI data rate before production release.
Route DDC and CEC as bidirectional control paths and follow the datasheet guidance for pull-up placement and isolation. The integrated CEC pull-ups should be considered when calculating bus loading. Keep connector stubs short and separate switching or protection-device return currents from the sensitive high-speed paths to reduce crosstalk and common-mode noise.
Do not treat the 4:1 label as confirmation that every source and sink combination is supported. Validate resolution, pixel clock, color format, HDCP behavior, EDID data, DDC exchange, and CEC commands across every required route. Also account for the manufacturer’s not-recommended-for-new-designs lifecycle status when creating a production BOM or planning an obsolescence migration.
合規資訊
The ADV3002 is an interface IC and is not identified as an AEC-Q100-qualified automotive device. Specific environmental and material-compliance declarations were not established from the available product records.