Microchip Technology

ATF22V10C-15JI - 15ns 10-Macrocell EE PLD | Microchip

MPN: ATF22V10C-15JI ✓ نشط
5 V Vdss 28-PLCC (11.51 mm × 11.51 mm) Package 5 ns Speed
الحد الأدنى للطلب: 1 |

ATF22V10C-15JI نظرة عامة

The Microchip Technology ATF22V10C-15JI is a high-performance CMOS electrically erasable programmable logic device with 10 macrocells, a 15 ns propagation delay, and a 28-pin PLCC package. Designed for 5 V systems, it combines reusable Flash-memory configuration with 500-gate-equivalent logic capacity, making it suitable for control, decoding, interface, and fixed-protocol logic. The ATF22V10C family also offers performance grades down to 5 ns and typical power dissipation as low as 10 uA.

An electrically erasable programmable logic device, or EEPLD, is a semiconductor that stores its logic configuration in nonvolatile memory. It occupies the programmable-logic-device and logic-IC hierarchy while providing an alternative to a mask-programmed PAL, GAL, or discrete gate-array implementation. Because the configuration can be electrically erased and reprogrammed, the ATF22V10C supports design revisions, field updates, and simplified logic customization without changing the PCB.

The ATF22V10C-15JI includes a latch feature that holds inputs at their previous logic states, a useful behavior for registered control paths and systems requiring state retention. Its 10 macrocells implement sum-of-products logic and programmable I/O functions, while the 15 ns speed grade targets moderate-speed control logic. The family’s electrically erasable Flash technology permits nonvolatile configuration and eliminates the fuse-programming constraints associated with older one-time-programmable devices.

Typical uses include peripheral address decoding, control-signal generation, latch-based sequencing, glue logic for processors and FPGAs, and compact interface adapters. Its 28-pin PLCC package also makes it appropriate for legacy industrial equipment and test systems where socketed or surface-mount PLCC hardware is already standardized. Designers should preserve the JEDEC-compatible pin arrangement and confirm the original fuse map before substituting it in an existing design.

The primary design consideration is compatibility. The ATF22V10C-15JI operates from a nominal 5 V supply, and the manufacturer specifies 5 V ±10% for military and industrial temperature ranges and 5 V ±5% for commercial ranges. Verify temperature grade, supply tolerance, unused pins, and macrocell assignments against the manufacturer datasheet before releasing a replacement or new PCB.

This page combines the manufacturer specifications, verified sourcing information, drop-in comparison candidates, and practical migration guidance for engineers evaluating the ATF22V10C-15JI in legacy programmable-logic designs.

بدائل مباشرة لـ ATF22V10C-15JI — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ATF22V10C-15JI (نفس عامل الشكل والبصمة) — يختلف في Package, Device Type, Propagation Delay, Temperature Grade, Family Maximum Speed.

Microchip Technology
Package: 28-pin PLCC, J-lead
Device Type: Electrically erasable CMOS programmable logic device (PLD)
Propagation Delay: 10 ns
قارن مع ATF22V10C-15JI →
Microchip Technology
Package: 24-SOIC
Device Type: EEPLD
قارن مع ATF22V10C-15JI →
Microchip Technology
Package: 28-pin PLCC
Device Type: 22V10-series electrically erasable programmable logic device
Temperature Grade: Industrial temperature
قارن مع ATF22V10C-15JI →
Microchip Technology
Package: 28-LCC (J-Lead), 11.51 mm x 11.51 mm
Propagation Delay: 7.5 ns
Temperature Grade: Industrial
قارن مع ATF22V10C-15JI →
Microchip Technology
Package: 28-pin PLCC
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Propagation Delay: 7.5 ns
قارن مع ATF22V10C-15JI →

ATF22V10C-15JU

✅ بديل مباشر
📦 28-PLCC (11.51 x 11.51 mm)
Same 15 ns speed and 28-PLCC package; ordering suffix differs by 0% in speed and package while temperature-grade requirements must be verified

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF22V10C-15SI

✅ بديل مباشر
📦 28-PLCC (11.51 x 11.51 mm)
Same 22V10 architecture and 15 ns speed; ordering suffix differs by 0% in speed and requires temperature and package verification

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF22V10CQ-15JI

✅ بديل مباشر
📦 28-PLCC (11.51 x 11.51 mm)
Same 15 ns speed and 10-macrocell 22V10 architecture; CQ ordering variant differs by 0% in stated speed while qualification and temperature requirements differ

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF22V10C-10JI

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 28-PLCC (11.51 x 11.51 mm)
Electrically erasable CMOS programmable logic device (PLD) · ATF22V10C · 10 macrocells · 10 ns · Electrically erasable Flash memory · 5 V · 5 V plus or minus 10 percent · 5 V plus or minus 5 percent

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATF22V10C-7JI

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 28-PLCC (11.51 x 11.51 mm)
EE PLD · 22V10 · 10 macrocells · 500 gates · 7.5 ns · 5 V · Electrically Erasable Flash memory · CMOS

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATF22V10C-15JI الحدود القصوى والخصائص الكهربائية

Device Type High-performance electrically erasable programmable logic device
Technology CMOS electrically erasable Flash memory
Logic Capacity 500 gate equivalents
Macrocells 10 macrocells
Propagation Delay 15 ns
Family Maximum Speed 5 ns
Nominal Supply Voltage 5 V
Industrial Supply Tolerance 5 V ±10%
Commercial Supply Tolerance 5 V ±5%
Typical Low Power Dissipation 10 uA
Input Latch Feature Yes
العلبة 28-PLCC (11.51 mm × 11.51 mm)
نوع التركيب Surface mount
Programmable Configuration Electrically erasable nonvolatile Flash memory

دليل تكوين أطراف ATF22V10C-15JI 28-plcc (11.51 mm × 11.51 mm)

تكوين الأطراف لـ ATF22V10C-15JI (حزمة 28-plcc (11.51 mm × 11.51 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 28-plcc (11.51 mm × 11.51 mm) لـ ATF22V10C-15JI

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATF22V10C-15JI.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ATF22V10C-15JI مناسب لـ 6 التطبيقs: Industrial Address Decoding, FPGA And Processor Glue Logic, Legacy GAL22V10 Migration, Control Signal Sequencing, Test And Measurement Instrumentation, Embedded Control And Peripheral Interfacing.

🏭

Industrial Address Decoding

The ATF22V10C-15JI is suitable for decoding processor and peripheral address ranges into chip-select and control signals. Its 10 macrocells provide 500 gate-equivalent programmable logic, allowing multiple address comparisons and output equations to be consolidated into one device. The 15 ns propagation-delay grade suits moderate-speed bus control rather than today's fastest synchronous interfaces. The 28-PLCC package also supports replacement of GAL22V10-class legacy decoding logic. Confirm setup and hold timing at the connected bus and preserve the programmed fuse map when moving an existing design.

🖥️

FPGA And Processor Glue Logic

The ATF22V10C-15JI can implement compact control and interface logic between a processor, FPGA, memory, and peripheral devices. Each macrocell can form programmable product terms, while the latch feature supports state-holding control sequences. Its 5 V operating point and 15 ns delay make it appropriate for legacy 5 V systems that retain PLCC-based expansion logic. Engineers should budget timing margin across combinational decode, registered output, and board interconnect. The device is most attractive where a small amount of flexible logic is needed without adding another large programmable device.

🔧

Legacy GAL22V10 Migration

The ATF22V10C-15JI is a practical migration candidate for GAL22V10 logic in equipment that relies on JEDEC-compatible pin assignments and fuse-map conventions. Microchip Technology identifies ATF22V10C-family devices as pin-to-pin and JEDEC-fuse-map compatible with GAL22V10 replacements, although minor AC and DC differences can exist. Use the manufacturer pin and timing tables to validate every path, especially when replacing older bipolar devices. The electrically erasable Flash configuration also allows controlled updates to the logic image without physically replacing a one-time-programmable device.

⚡

Control Signal Sequencing

The ATF22V10C-15JI can generate enable, reset, latch, and interlock signals where a fixed sequence must be reproduced reliably across production units. Its programmable macrocells support multiple product terms, and the latch feature can hold inputs at their previous states when a control sequence requires stable values. The 15 ns class provides deterministic response for control paths operating below the device's maximum timing limits. Validate asynchronous input behavior, reset priority, and output states against the programmed equations. Programming-tool simulation should be checked before committing the configuration to production hardware.

🔧

Test And Measurement Instrumentation

The ATF22V10C-15JI can implement protocol decoding, mode selection, and fixture-control logic in 5 V instrumentation. Its 10 macrocells consolidate repetitive combinational functions, while the nonvolatile Flash configuration preserves the instrument's control logic between power cycles. The 28-PLCC package suits legacy instrument architecture and boards designed around socketed PLCC components. Check the latch feature, I/O direction, and unused-pin requirements in the manufacturer documentation. For timing-critical measurement paths, verify the full input-to-output delay against the instrument's acquisition or trigger requirements.

📱

Embedded Control And Peripheral Interfacing

The ATF22V10C-15JI is useful for small embedded systems that need programmable decode, interrupt masking, or interface adaptation alongside a microprocessor. Its 10 macrocells provide enough capacity for several related control functions without requiring continuous processor intervention. The 5 V supply and 15 ns propagation delay fit many established embedded platforms, but modern low-voltage cores require suitable level translation. Confirm signal levels, setup and hold timing, input tolerance, and output behavior at the connected device. Electrically erasable Flash supports design revisions during product maintenance.

ملخص المنتجات الموصى بها

ATF22V10C-15JU Same-family 28-PLCC replacement candidate يُستخدم في: Industrial Address Decoding, Legacy GAL22V10 Migration, Test And Measurement Instrumentation ATF22V10CQ-15JI Same-family ordering alternative يُستخدم في: Industrial Address Decoding, Control Signal Sequencing, Embedded Control And Peripheral Interfacing ATF22V10C-10JI Microchip Technology يُستخدم في: FPGA And Processor Glue Logic, Control Signal Sequencing, Test And Measurement Instrumentation ATF22V10C-7JI Microchip Technology يُستخدم في: FPGA And Processor Glue Logic ATF22V10C-15SI Related 15 ns family ordering option يُستخدم في: Legacy GAL22V10 Migration, Embedded Control And Peripheral Interfacing
What are the key specifications of ATF22V10C-15JI that engineers should know?
The ATF22V10C-15JI is a 5 V, 10-macrocell electrically erasable programmable logic device with a 15 ns propagation delay in a 28-PLCC package. According to the Microchip Technology manufacturer datasheet, the ATF22V10C family provides 500 gate-equivalent logic, speeds down to 5 ns across available grades, and typical power dissipation as low as 10 uA. Its configuration is held in electrically erasable Flash memory, while the latch feature can preserve input states for registered control logic.
What is the ATF22V10C-15JI and what does it do?
The ATF22V10C-15JI is a CMOS EEPLD that implements programmable sum-of-products logic in 10 macrocells. The Microchip Technology manufacturer datasheet identifies the device as a 22V10-family, 500-gate-equivalent high-performance programmable logic device. Its electrically erasable Flash configuration permits repeated programming, and its latch feature holds inputs at their previous logic states when enabled. The part is intended for address decoding, control logic, and other compact fixed-logic functions.
Where can I download the ATF22V10C-15JI datasheet PDF?
The ATF22V10C-15JI datasheet PDF is available from the official Microchip Technology document at https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/doc0735.pdf. Use the document's package, timing, pin-description, AC and DC parameter tables, and programming information when designing or replacing the device. The manufacturer product page for ATF22V10C also links to complete datasheet and CAD resources.
Where can I find the ATF22V10C pinout?
Use the ATF22V10C pin-description table and package drawing in the official Microchip Technology datasheet to determine the ATF22V10C pinout. The ATF22V10C-15JI is specified in a 28-PLCC package, so verify all 28 physical pins, power connections, configuration pins, and I/O assignments against the package drawing before routing a PCB. Do not infer unused-pin connections from a generic PLCC footprint because device-specific programming requirements determine the correct treatment.
How do I program an ATF22V10C device?
Program the ATF22V10C by configuring its electrically erasable Flash memory with a compatible programmer and the logic design prepared for the selected fuse map. The Microchip Technology manufacturer datasheet describes the device as an electrically erasable programmable logic device rather than a one-time-programmable PAL. Before programming, confirm the pin assignments, output polarity, product terms, unused I/O behavior, and any latch requirements, then verify the programmed configuration in the programming software.
What is the ATF22V10C-15JI propagation delay and logic capacity?
The ATF22V10C-15JI has a 15 ns propagation-delay grade and provides 10 macrocells, equivalent to 500 gates according to the Microchip Technology manufacturer datasheet. This speed is suitable for moderate-speed decode, sequencing, and control functions rather than high-frequency synchronous processing. The ATF22V10C family is also available in faster grades down to 5 ns, so selecting a different speed suffix can change timing without changing the basic 22V10 architecture.
What supply voltage does the ATF22V10C-15JI require?
The ATF22V10C-15JI operates from a nominal 5 V supply. The Microchip Technology manufacturer datasheet specifies 5 V ±10% for military and industrial temperature ranges and 5 V ±5% for commercial ranges. Confirm the exact temperature grade and applicable supply limits before using the IC. Decoupling and input rise-time requirements should also follow the guidance in the manufacturer datasheet.
Can ATF22V10C-15JU replace the ATF22V10C-15JI?
The ATF22V10C-15JU is a closely related 22V10-family device listed in a 28-PLCC package, making it a strong drop-in candidate for boards designed around ATF22V10C-15JI. According to the Microchip Technology comparison information, both devices use electrically erasable programmable logic and Flash memory. Confirm temperature grade, commercial availability, and the exact programmed fuse map before substitution, because the ordering suffix can encode an operating-temperature distinction.
Is ATF22V10C-15JI the same as ATF22V10C-15SI?
The ATF22V10C-15SI belongs to the same electrically erasable 22V10 programmable-logic family and is a candidate when its package and ordering options match the target board. The ATF22V10C-15JI is specified in 28-PLCC, while the Microchip Technology family documentation identifies ATF22V10C-15SI as a related variant. Confirm the exact package, temperature range, pin arrangement, and fuse-map compatibility in the manufacturer documents before treating the two as interchangeable.
When should I choose ATF22V10C-15JI over a faster ATF22V10C speed grade?
Choose ATF22V10C-15JI when a 15 ns propagation-delay grade is sufficient and the design benefits from a readily documented 22V10-family configuration. The ATF22V10C-15JI offers 10 macrocells, 500 gate-equivalent logic, and a 28-PLCC package. Faster family grades reach 5 ns but may change cost, availability, or timing margins. Select the slower grade only after confirming every path meets its required setup and hold timing.
When should I choose ATF22V10C-15JI over ATF22V10C-15JU?
Choose ATF22V10C-15JI when the required ordering suffix specifies the industrial-grade 15 ns device for the target operating environment. ATF22V10C-15JU is also listed in a 28-PLCC package and offers close electrical and architectural similarity, but its suffix can represent a different commercial ordering option. The Microchip Technology manufacturer datasheet should be used to verify temperature grade, supply limits, and package details before selecting between them.
What is the best drop-in replacement for ATF22V10C-15JI?
The ATF22V10C-15JU is the closest same-footprint candidate identified for the ATF22V10C-15JI because both are 22V10-family, 15 ns, 10-macrocell devices listed in 28-PLCC packages. Other ATF22V10C speed and ordering variants can provide drop-in options when their suffix requirements match. No verified cross-brand substitute was established, so a replacement should not be selected solely from a generic programmable-logic family listing.
What can replace the ATF22V10C-15JI in a legacy design?
An ATF22V10C-15JU can potentially replace the ATF22V10C-15JI because it is a 15 ns, 10-macrocell, 28-PLCC member of the same electrically erasable 22V10 family. The Microchip Technology family documentation indicates that ATF22V10C/CQ/CQZ devices are pin-to-pin and JEDEC-fuse-map compatible with GAL22V10-class devices, with minor AC and DC differences possible. Validate timing, temperature, supply, and the programmed fuse map before production use.
Where can I buy ATF22V10C-15JI online and what is the current price?
Use the Request a Quote form on this page to request current ATF22V10C-15JI pricing, stock, minimum order quantity, and lead time. The device is listed by multiple authorized sourcing channels, but commercial terms can change with quantity, date, and availability. Provide the exact 28-PLCC ordering code ATF22V10C-15JI when requesting a quotation so the quote is tied to the correct speed, temperature, and package variant.
Is ATF22V10C-15JI in stock and what is its lead time?
Stock and lead time for ATF22V10C-15JI should be confirmed through the Request a Quote form on this page because availability varies by quantity and procurement date. Request the exact MPN, target quantity, and delivery location for a current quotation. The Microchip Technology manufacturer documentation confirms the device family and 28-PLCC configuration, but it does not establish a current factory lead time for this orderable suffix.

بيانات مرجعية هندسية لـ ATF22V10C-15JI — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ATF22V10C-15JI for a 5 V legacy 22V10 design requiring 10 macrocells, a 15 ns propagation-delay class, and a 28-PLCC footprint. Select ATF22V10C-15JU when its ordering and temperature suffix match the equipment more closely; it has the same stated speed, macrocell count, and package. Use ATF22V10C-15SI for a related same-speed family option after checking its package and temperature details. ATF22V10C-10JI and ATF22V10C-7JI are appropriate when additional timing margin justifies a faster speed grade. ATF22V10CQ-15JI provides a same-speed family ordering alternative whose qualification requirements must be checked. No cross-brand drop-in replacement was verified, so changing manufacturers would require an independent pin, timing, fuse-map, and lifecycle assessment rather than an assumption of compatibility.

المقارنة مع البدائل

المعامل هذا المنتج ATF22V10C-15JU ATF22V10C-15SI ATF22V10CQ-15JI ATF22V10C-10JI ATF22V10C-7JI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Propagation Delay 15 ns 15 ns 15 ns 15 ns 10 ns 7 ns
Nominal Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Configuration Technology Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory
Typical Low Power Dissipation 10 uA at family level 10 uA at family level 10 uA at family level 10 uA at family level 10 uA at family level 10 uA at family level

أبرز الفروقات

  • Matches the established 22V10 programmable-logic architecture (مقابلATF22V10C-15JU)
  • Provides additional timing margin over the 10 ns family grade (مقابلATF22V10C-10JI)
  • Offers a distinct ordering option without changing the core logic function (مقابلATF22V10CQ-15JI)
  • Combines reprogrammable nonvolatile configuration with latch capability (مقابلATF22V10C-7JI)

ملاحظات التصميم

Do not treat every ATF22V10C ordering suffix as electrically and environmentally identical. The speed grade, operating-temperature option, and package code are encoded in the suffix. Compare the manufacturer ordering table, pin description, supply limits, and timing rows for the exact candidate. For a replacement, also validate the existing programmed fuse map and compare every affected signal path; architectural similarity does not by itself guarantee timing or qualification equivalence.

Follow the 28-PLCC footprint and pin numbering in the official package drawing rather than relying only on the generic PLCC outline. Confirm orientation marks, exposed connections if any, and all configuration and power pins before layout release. Preserve a short, clean return path for the supply and place required decoupling close to the device. Legacy boards should be inspected for socket pin damage, contamination, and clock or bus routing that could compromise the specified input transition requirements.

Use the manufacturer AC timing tables to establish setup, hold, propagation-delay, and input transition constraints for each implemented equation. The 15 ns grade does not guarantee that every multi-level product-term path completes within a system budget. Simulate the programmed fuse map with board-level rise times and loading included. Where a path is marginal, move it into a latch or choose a faster ATF22V10C speed grade after verifying that the change does not affect the external bus protocol.

Design the 5 V rail within the supply tolerance applicable to the selected temperature grade and check all DC input and output limits from the manufacturer datasheet. Although the family can consume as little as 10 uA in typical low-power conditions, actual board demand depends on enabled I/O, state, and activity. Use the worst-case operating state when checking rail capacity, and ensure power-up and power-down behavior does not create an out-of-range input voltage on any configuration or I/O pin.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer datasheet identifies industrial and military temperature ranges but does not provide the requested RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classifications for this ordering code.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

atf22v10c datasheet atf22v10c programming atf22v10c pinout atf22v10c programmable logic device ATF22V10C-15JI datasheet pdf ATF22V10C-15JI pinout ATF22V10C-15JI programming ATF22V10C-15JI equivalent ATF22V10C-15JI replacement ATF22V10C-15JI vs ATF22V10C-15JU ATF22V10C-15JI price Microchip ATF22V10C-15JI ATF22V10C-15JI 28-PLCC ATF22V10C-15JI address decoding ATF22V10C-15JI GAL22V10 replacement

المكونات والمصطلحات ذات الصلة

Microchip Technology ATF22V10C-15JI ATF22V10C ATF22V10C-15JU ATF22V10C-15SI ATF22V10CQ-15JI ATF22V10C-10JI ATF22V10C-7JI EEPLD electrically erasable programmable logic device programmable logic device logic IC PAL GAL22V10 CMOS electrically erasable Flash memory JEDEC fuse-map compatibility 28-PLCC PLCC family surface-mount package 10 macrocells 500 gate equivalents 15 ns propagation delay 5 V supply address decoding
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر