ATF22V10C-15JI - 15ns 10-Macrocell EE PLD | Microchip
MPN: ATF22V10C-15JI ✓ NakahandaATF22V10C-15JI Ulas
An electrically erasable programmable logic device, or EEPLD, is a semiconductor that stores its logic configuration in nonvolatile memory. It occupies the programmable-logic-device and logic-IC hierarchy while providing an alternative to a mask-programmed PAL, GAL, or discrete gate-array implementation. Because the configuration can be electrically erased and reprogrammed, the ATF22V10C supports design revisions, field updates, and simplified logic customization without changing the PCB.
The ATF22V10C-15JI includes a latch feature that holds inputs at their previous logic states, a useful behavior for registered control paths and systems requiring state retention. Its 10 macrocells implement sum-of-products logic and programmable I/O functions, while the 15 ns speed grade targets moderate-speed control logic. The family’s electrically erasable Flash technology permits nonvolatile configuration and eliminates the fuse-programming constraints associated with older one-time-programmable devices.
Typical uses include peripheral address decoding, control-signal generation, latch-based sequencing, glue logic for processors and FPGAs, and compact interface adapters. Its 28-pin PLCC package also makes it appropriate for legacy industrial equipment and test systems where socketed or surface-mount PLCC hardware is already standardized. Designers should preserve the JEDEC-compatible pin arrangement and confirm the original fuse map before substituting it in an existing design.
The primary design consideration is compatibility. The ATF22V10C-15JI operates from a nominal 5 V supply, and the manufacturer specifies 5 V ±10% for military and industrial temperature ranges and 5 V ±5% for commercial ranges. Verify temperature grade, supply tolerance, unused pins, and macrocell assignments against the manufacturer datasheet before releasing a replacement or new PCB.
This page combines the manufacturer specifications, verified sourcing information, drop-in comparison candidates, and practical migration guidance for engineers evaluating the ATF22V10C-15JI in legacy programmable-logic designs.
Mga alternatibo na pwedeng ilagay na ATF22V10C-15JI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ATF22V10C-15JI (parehas na form factor at footprint) — pagkakaiba sa Package, Device Type, Propagation Delay, Temperature Grade, Family Maximum Speed.
ATF22V10C-15JU
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATF22V10C-15SI
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATF22V10CQ-15JI
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATF22V10C-10JI
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →ATF22V10C-7JI
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →ATF22V10C-15JI Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | High-performance electrically erasable programmable logic device |
| Technology | CMOS electrically erasable Flash memory |
| Logic Capacity | 500 gate equivalents |
| Macrocells | 10 macrocells |
| Propagation Delay | 15 ns |
| Family Maximum Speed | 5 ns |
| Nominal Supply Voltage | 5 V |
| Industrial Supply Tolerance | 5 V ±10% |
| Commercial Supply Tolerance | 5 V ±5% |
| Typical Low Power Dissipation | 10 uA |
| Input Latch Feature | Yes |
| Packhaging | 28-PLCC (11.51 mm × 11.51 mm) |
| Uri ng Pagpapasok | Surface mount |
| Programmable Configuration | Electrically erasable nonvolatile Flash memory |
Gabay sa Pin Configuration ng ATF22V10C-15JI 28-plcc (11.51 mm × 11.51 mm)
Pin configuration para sa ATF22V10C-15JI (28-plcc (11.51 mm × 11.51 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATF22V10C-15JI.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATF22V10C-15JI ay nararapat para sa 6 aplikasyons: Industrial Address Decoding, FPGA And Processor Glue Logic, Legacy GAL22V10 Migration, Control Signal Sequencing, Test And Measurement Instrumentation, Embedded Control And Peripheral Interfacing.
Industrial Address Decoding
The ATF22V10C-15JI is suitable for decoding processor and peripheral address ranges into chip-select and control signals. Its 10 macrocells provide 500 gate-equivalent programmable logic, allowing multiple address comparisons and output equations to be consolidated into one device. The 15 ns propagation-delay grade suits moderate-speed bus control rather than today's fastest synchronous interfaces. The 28-PLCC package also supports replacement of GAL22V10-class legacy decoding logic. Confirm setup and hold timing at the connected bus and preserve the programmed fuse map when moving an existing design.
Inirekomenda
FPGA And Processor Glue Logic
The ATF22V10C-15JI can implement compact control and interface logic between a processor, FPGA, memory, and peripheral devices. Each macrocell can form programmable product terms, while the latch feature supports state-holding control sequences. Its 5 V operating point and 15 ns delay make it appropriate for legacy 5 V systems that retain PLCC-based expansion logic. Engineers should budget timing margin across combinational decode, registered output, and board interconnect. The device is most attractive where a small amount of flexible logic is needed without adding another large programmable device.
Inirekomenda
Legacy GAL22V10 Migration
The ATF22V10C-15JI is a practical migration candidate for GAL22V10 logic in equipment that relies on JEDEC-compatible pin assignments and fuse-map conventions. Microchip Technology identifies ATF22V10C-family devices as pin-to-pin and JEDEC-fuse-map compatible with GAL22V10 replacements, although minor AC and DC differences can exist. Use the manufacturer pin and timing tables to validate every path, especially when replacing older bipolar devices. The electrically erasable Flash configuration also allows controlled updates to the logic image without physically replacing a one-time-programmable device.
Inirekomenda
Control Signal Sequencing
The ATF22V10C-15JI can generate enable, reset, latch, and interlock signals where a fixed sequence must be reproduced reliably across production units. Its programmable macrocells support multiple product terms, and the latch feature can hold inputs at their previous states when a control sequence requires stable values. The 15 ns class provides deterministic response for control paths operating below the device's maximum timing limits. Validate asynchronous input behavior, reset priority, and output states against the programmed equations. Programming-tool simulation should be checked before committing the configuration to production hardware.
Inirekomenda
Test And Measurement Instrumentation
The ATF22V10C-15JI can implement protocol decoding, mode selection, and fixture-control logic in 5 V instrumentation. Its 10 macrocells consolidate repetitive combinational functions, while the nonvolatile Flash configuration preserves the instrument's control logic between power cycles. The 28-PLCC package suits legacy instrument architecture and boards designed around socketed PLCC components. Check the latch feature, I/O direction, and unused-pin requirements in the manufacturer documentation. For timing-critical measurement paths, verify the full input-to-output delay against the instrument's acquisition or trigger requirements.
Inirekomenda
Embedded Control And Peripheral Interfacing
The ATF22V10C-15JI is useful for small embedded systems that need programmable decode, interrupt masking, or interface adaptation alongside a microprocessor. Its 10 macrocells provide enough capacity for several related control functions without requiring continuous processor intervention. The 5 V supply and 15 ns propagation delay fit many established embedded platforms, but modern low-voltage cores require suitable level translation. Confirm signal levels, setup and hold timing, input tolerance, and output behavior at the connected device. Electrically erasable Flash supports design revisions during product maintenance.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATF22V10C-15JI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATF22V10C-15JU | ATF22V10C-15SI | ATF22V10CQ-15JI | ATF22V10C-10JI | ATF22V10C-7JI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Propagation Delay | 15 ns | 15 ns | 15 ns | 15 ns | 10 ns | 7 ns |
| Nominal Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Typical Low Power Dissipation | 10 uA at family level | 10 uA at family level | 10 uA at family level | 10 uA at family level | 10 uA at family level | 10 uA at family level |
Pangunahing mga Pagkakaiba
- Matches the established 22V10 programmable-logic architecture (kumpara saATF22V10C-15JU)
- Provides additional timing margin over the 10 ns family grade (kumpara saATF22V10C-10JI)
- Offers a distinct ordering option without changing the core logic function (kumpara saATF22V10CQ-15JI)
- Combines reprogrammable nonvolatile configuration with latch capability (kumpara saATF22V10C-7JI)
Talaan ng Disenyo
Do not treat every ATF22V10C ordering suffix as electrically and environmentally identical. The speed grade, operating-temperature option, and package code are encoded in the suffix. Compare the manufacturer ordering table, pin description, supply limits, and timing rows for the exact candidate. For a replacement, also validate the existing programmed fuse map and compare every affected signal path; architectural similarity does not by itself guarantee timing or qualification equivalence.
Follow the 28-PLCC footprint and pin numbering in the official package drawing rather than relying only on the generic PLCC outline. Confirm orientation marks, exposed connections if any, and all configuration and power pins before layout release. Preserve a short, clean return path for the supply and place required decoupling close to the device. Legacy boards should be inspected for socket pin damage, contamination, and clock or bus routing that could compromise the specified input transition requirements.
Use the manufacturer AC timing tables to establish setup, hold, propagation-delay, and input transition constraints for each implemented equation. The 15 ns grade does not guarantee that every multi-level product-term path completes within a system budget. Simulate the programmed fuse map with board-level rise times and loading included. Where a path is marginal, move it into a latch or choose a faster ATF22V10C speed grade after verifying that the change does not affect the external bus protocol.
Design the 5 V rail within the supply tolerance applicable to the selected temperature grade and check all DC input and output limits from the manufacturer datasheet. Although the family can consume as little as 10 uA in typical low-power conditions, actual board demand depends on enabled I/O, state, and activity. Use the worst-case operating state when checking rail capacity, and ensure power-up and power-down behavior does not create an out-of-range input voltage on any configuration or I/O pin.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer datasheet identifies industrial and military temperature ranges but does not provide the requested RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classifications for this ordering code.