Microchip Technology

ATF22V10C-10JI - 10-Macrocell 10ns Flash PLD | Microchip

MPN: ATF22V10C-10JI ✓ Active
5 V Vdss 28-pin PLCC, J-lead Package
MOQ: 1 |

ATF22V10C-10JI Overview

The Microchip Technology ATF22V10C-10JI is a 10-macrocell, electrically erasable CMOS programmable logic device (PLD) with a 10 ns propagation delay, packaged in a 28-pin PLCC J-lead package. It is designed for legacy and industrial logic-control applications requiring programmable AND/OR logic, registered outputs, and flexible in-system configuration using electrically erasable Flash memory.

A programmable logic device is a semiconductor that implements a Boolean function through user-programmed logic rather than a fixed gate arrangement. The ATF22V10C series provides 10 macrocells, a 22V10-compatible architecture, and a JEDEC-compatible fuse map for applications previously implemented with GAL22V10-type devices. Electrically erasable Flash technology allows the configuration to be reprogrammed, supporting design revisions, production programming, and field-updatable control logic.

The ATF22V10C-10JI is identified by its 10 ns speed grade and industrial temperature qualification. The manufacturer describes the ATF22V10C family as supporting speeds down to 5 ns, with typical power dissipation as low as 10 microamps. The device operates from a nominal 5 V supply, with the supplied manufacturer material specifying the full 5 V plus or minus 10 percent range for military and industrial temperature ranges and 5 V plus or minus 5 percent for commercial operation.

Typical applications include industrial control interfaces, legacy peripheral emulation, address decoding, bus arbitration, interface translation, and small state-machine implementations. Its 10 macrocells make it suitable for compact glue-logic designs where a discrete gate network would be larger or less flexible. The electrically erasable Flash configuration also makes the device useful where engineering changes are expected during prototype development or maintenance cycles.

When designing around this PLD, verify the 28-pin PLCC pinout and the exact fuse-map and programming-software compatibility before updating an existing GAL22V10 design. The ATF22V10C-10JI is not a general-purpose microcontroller: it implements deterministic combinational and registered logic without firmware execution. Confirm supply tolerances, timing requirements, temperature range, programming toolchain, and output-drive requirements against the manufacturer datasheet.

This page consolidates the manufacturer specifications, package information, cross-reference information, and practical selection considerations for engineers evaluating a pin-compatible replacement or designing new compact control logic.

Drop-in alternatives for ATF22V10C-10JI — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ATF22V10C-10JI (same form factor and footprint) — differing in Package, Device Type, Propagation Delay, Family Maximum Speed, Temperature Grade.

Microchip Technology
Package: 28-pin PLCC
Family Maximum Speed: 5 ns
Compare with ATF22V10C-10JI →
Microchip Technology
Package: 28-PLCC (11.51 mm × 11.51 mm)
Device Type: High-performance electrically erasable programmable logic device
Propagation Delay: 15 ns
Compare with ATF22V10C-10JI →
Microchip Technology
Package: 28-pin PLCC
Device Type: 22V10-series electrically erasable programmable logic device
Family Maximum Speed: Down to 5 ns
Compare with ATF22V10C-10JI →
Microchip Technology
Package: 28-LCC (J-Lead), 11.51 mm x 11.51 mm
Propagation Delay: 7.5 ns
Compare with ATF22V10C-10JI →

ATF22V10C-10JU

✅ Drop-In
📦 28-PLCC (11.51x11.51)
Same 10-macrocell ATF22V10C architecture, 10 ns speed grade, and 28-PLCC footprint; ordering-code temperature qualification differs.

📋 Reference alternative (not in catalog)

ATF22V10C-15JI

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 28-PLCC (11.51x11.51)
High-performance electrically erasable programmable logic device · CMOS electrically erasable Flash memory · 500 gate equivalents · 10 macrocells · 15 ns · 5 ns · 5 V · 5 V ±10%

Contact for price

View Datasheet →

ATF22V10C-10JC

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 28-PLCC (11.51x11.51)
Microchip Technology · Electrically erasable programmable logic device · 22V10 · Electrically erasable Flash memory · 10 macrocells · 500 gates · 10 ns · 5 ns

Contact for price

View Datasheet →

ATF22V10C-7JI

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 28-PLCC (11.51x11.51)
EE PLD · 22V10 · 10 macrocells · 500 gates · 7.5 ns · 5 V · Electrically Erasable Flash memory · CMOS

Contact for price

View Datasheet →

ATF22V10C-5JI

✅ Drop-In ⚠️ Specs Unverified
📦 28-PLCC (11.51x11.51)
Same ATF22V10C 10-macrocell architecture and industrial J-lead package; 5 ns speed grade improves timing by 50 percent.

📋 Reference alternative (not in catalog)

ATF22V10C-7JC

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 28-PLCC (11.51x11.51)
22V10-series electrically erasable programmable logic device · EEPLD · 500 gates · 10 macrocells · 5 V · 7 ns · 7.5 ns · 28-pin PLCC

Contact for price

View Datasheet →

ATF22V10C-10JI Maximum Ratings & Electrical Characteristics

Device Type Electrically erasable CMOS programmable logic device (PLD)
Series ATF22V10C
Macrocells 10 macrocells
Propagation Delay 10 ns
Configuration Technology Electrically erasable Flash memory
Nominal Supply Voltage 5 V
Military and Industrial Supply Range 5 V plus or minus 10 percent
Commercial Supply Range 5 V plus or minus 5 percent
Minimum Family Propagation Delay 5 ns
Typical Low Power Dissipation 10 microamps
Package 28-pin PLCC, J-lead
Package Dimensions 11.51 mm x 11.51 mm
Temperature Grade Industrial
Terminal Count 28 terminals
Terminal Form J-bend
Mounting Type Surface mount
Fuse Map Compatibility JEDEC fusemap compatible
Power-Down Feature Optional pin-controlled power-down
PLCC Power-Down Pin Pin 5
AEC-Q100 Qualification Not applicable

ATF22V10C-10JI 11.51 mm x 11.51 mm Pin Configuration Guide

Pin configuration for ATF22V10C-10JI (11.51 mm x 11.51 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

11.51 mm x 11.51 mm package pinout diagram for ATF22V10C-10JI

No detailed pinout data available for ATF22V10C-10JI.

Refer to the datasheet for full pin configuration.

Typical Applications

ATF22V10C-10JI is suitable for 6 applications: Industrial Control Glue Logic, Legacy Peripheral Emulation, Bus Address Decoding, Interface Signal Qualification, Small State Machine Control, Programmable Test and Measurement Logic.

🏭

Industrial Control Glue Logic

The ATF22V10C-10JI suits compact industrial control logic where a controller needs deterministic decoding, interlocks, and state transitions without a full microcontroller. Its 10 macrocells and 10 ns propagation delay support fast combinational decisions and registered outputs, while the electrically erasable Flash configuration allows logic revisions after prototype validation. The 28-pin PLCC package also supports legacy industrial boards that already use the compatible 22V10 footprint. Engineers should validate propagation delay against the control loop, confirm the industrial temperature grade, and preserve the JEDEC fuse map when migrating an existing GAL22V10 design.

🔧

Legacy Peripheral Emulation

ATF22V10C-10JI can reproduce the fixed logic previously implemented in GAL22V10-type programmable logic, making it useful for maintaining older peripheral-control boards. Microchip identifies the ATF22V10C family as pin-to-pin and JEDEC fusemap compatible with GAL22V10 devices, while electrically erasable Flash removes the one-time fuse-programming constraint. The 10 ns grade is appropriate for address decoding, command qualification, and interface state machines. Before replacing an installed device, compare AC and DC characteristics, verify the PLCC package orientation, and confirm that the available programmer supports the ATF22V10C fuse map.

🖥️

Bus Address Decoding

The ATF22V10C-10JI is suitable for decoding address and control buses into chip-select or resource-enable signals. Ten macrocells provide enough product terms and registered outputs for compact decode structures, while the 10 ns propagation delay defines how quickly decode outputs can respond after an address or control change. Registering outputs can reduce combinational glitches when the board requires stable select timing. In a new design, document the registered versus combinational product-term allocation and simulate every address transition. For an upgrade, preserve the established fuse map and validate timing against the slowest external device on the bus.

⚡

Interface Signal Qualification

ATF22V10C-10JI can qualify asynchronous request, acknowledge, and handshake signals before they reach a larger control system. Its 10 ns propagation delay and registered output capability help implement deterministic pulse shaping, interlock generation, and synchronized command enable functions. Electrically erasable Flash is particularly useful when a legacy interface has several hardware variants: engineers can store different qualification patterns without changing the PCB. The design must account for the actual input and output timing across voltage and temperature, use the manufacturer pinout when assigning PLCC pin 5 as the optional power-down control, and test metastability risks at any external synchronization boundary.

🧩

Small State Machine Control

The ATF22V10C-10JI is well suited to small state-machine and sequencing functions in industrial and instrumentation products. Ten macrocells can implement a compact sequence controller, while the 10 ns delay provides margin for combinational transitions between clocked states. The flash-based configuration allows firmware-like logic updates during maintenance without replacing the component, although the device still requires a dedicated programming cycle rather than runtime software updates. Design the state equations with explicit reset and illegal-state handling, confirm the available clock and registered-output resources, and validate every transition with a timing simulation before programming production hardware.

🔬

Programmable Test and Measurement Logic

ATF22V10C-10JI can implement instrument-specific sequencing, trigger routing, and status decoding where the control topology must remain flexible. Its 10 macrocells provide a compact solution for combining switch debounce logic, measurement sequencing, and output enables without building a large discrete gate network. The electrically erasable Flash configuration supports multiple fixture or test-mode configurations and rapid engineering changes. Because the PLD is not a microcontroller, external test controllers must perform sequencing and measurement. Verify the 10 ns propagation delay across the required supply range, isolate input signals from switching noise, and use the manufacturer's PLCC pin description to assign the optional power-down function.

What is ATF22V10C-10JI?
The ATF22V10C-10JI is a Microchip Technology 10-macrocell electrically erasable CMOS programmable logic device with a 10 ns propagation delay in a 28-pin PLCC J-lead package. According to the manufacturer ATF22V10C datasheet, it uses electrically erasable Flash memory and is intended for compact combinational and registered logic implementations in industrial equipment and legacy control systems.
How many macrocells does ATF22V10C-10JI have?
The ATF22V10C-10JI has 10 macrocells, which form the programmable logic sections of the device. The Microchip Technology ATF22V10C product page describes the family as a high-performance electrically erasable CMOS PLD, while the ATF22V10C-10JI product listing identifies the exact device as the 10-macrocell version.
What is the propagation delay of ATF22V10C-10JI?
The ATF22V10C-10JI has a 10 ns propagation delay speed grade. The manufacturer ATF22V10C datasheet states that the broader family supports speeds down to 5 ns, so the suffix identifies the selected performance grade within that family rather than the absolute minimum capability of the device family.
What is the ATF22V10C-10JI pinout?
The ATF22V10C-10JI uses a 28-pin PLCC J-lead footprint, and the manufacturer datasheet identifies PLCC pin 5 as the optional power-down input when the power-down feature is enabled. Use the pin-description table and standard PLCC numbering diagram in the manufacturer datasheet when assigning PCB nets or replacing an existing GAL22V10-compatible design.
Where can I download the ATF22V10C datasheet PDF?
The official ATF22V10C datasheet PDF is available from Microchip Technology at the manufacturer link listed on this page. The document is identified as document DOC0735 and covers the ATF22V10C electrically erasable CMOS programmable logic device, including timing, supply requirements, package options, and the optional power-down function.
How is ATF22V10C programmed?
ATF22V10C devices are programmed through a compatible PLD programming tool and programmer using the manufacturer-defined fuse map and device architecture. Because the ATF22V10C is a JEDEC fusemap-compatible replacement for GAL22V10-type logic, a programmer or software package supporting the ATF22V10C architecture is required. Confirm the selected package, fuse map, and adapter before programming production devices.
Can ATF22V10C-10JI replace a GAL22V10?
ATF22V10C devices can replace GAL22V10 devices because Microchip identifies the ATF22V10C family as pin-to-pin and JEDEC fusemap compatible, with similar AC and DC characteristics. The ATF22V10C-10JI is specifically a 10 ns industrial-grade PLCC version. Review both datasheets for minor electrical differences and confirm the exact package and programming requirements before substitution.
What is the best drop-in replacement for ATF22V10C-10JI?
The ATF22V10C-10JU is the closest identified same-package alternative because it is also a 10 ns ATF22V10C device in a 28-pin PLCC package. Its key distinction is the ordering-code temperature or qualification suffix. The ATF22V10C-10JI should be selected when industrial qualification is required, while the alternative is appropriate only when its individual temperature specification meets the application.
Is ATF22V10C-10JI the same as ATF22V10C-10JU?
The ATF22V10C-10JI and ATF22V10C-10JU share the ATF22V10C 10-macrocell architecture, 10 ns speed grade, and 28-pin PLCC package. They are not identical orderable part numbers: the suffix differentiates the specific qualification or temperature option. Check the manufacturer ordering table and the required industrial temperature range before treating one as a substitute for the other.
ATF22V10C-10JI vs ATF22V10C-10JU - which is better for industrial control?
ATF22V10C-10JI is the better match for industrial control when the project specifically requires the industrial-qualified ordering option. Both devices provide 10 macrocells, 10 ns propagation delay, and a 28-pin PLCC package, so their logic footprint is compatible. The decision should follow the exact temperature and qualification limits in the manufacturer ordering information, not the package appearance alone.
When should I choose ATF22V10C-10JI over ATF22V10C-10JU?
Choose ATF22V10C-10JI when the design requires the industrial-grade ordering option and must operate across the corresponding industrial temperature range. Choose ATF22V10C-10JU when that suffix satisfies the required commercial temperature conditions and the same 10 ns timing and 28-pin PLCC footprint are adequate. Both use electrically erasable Flash configuration and the ATF22V10C logic architecture.
What can replace ATF22V10C-10JI?
ATF22V10C-10JU is a verified same-family, same-package alternative with 10 macrocells and a 10 ns propagation delay in a 28-pin PLCC package. Other ATF22V10C ordering options may differ in speed or temperature grade, so they should be selected only after checking the manufacturer ordering table. The GAL22V10 architecture is also a functional replacement family, but verify its package and fuse-map details.
Where can I buy ATF22V10C-10JI online?
Use the Request a Quote form on this page to request ATF22V10C-10JI availability, commercial terms, and delivery scheduling for your required quantity. The manufacturer product page and major component listings identify the device, but current stock and shipment commitments should be confirmed through the quote workflow for the exact MPN and package.
What is the price of ATF22V10C-10JI?
The current commercial price for ATF22V10C-10JI should be requested through the Request a Quote form on this page using the exact MPN and required order quantity. The visible product listing states that the device is in stock, but its visible commercial result is a request-for-quote offer rather than a quantity-break price table. This avoids presenting an outdated or mismatched price.
What is the lead time for ATF22V10C-10JI?
The current lead time for ATF22V10C-10JI should be confirmed through the Request a Quote form on this page. One component listing indicates that the device can ship immediately and shows an estimated delivery window, but scheduling can change with quantity, packaging, and purchasing conditions. Provide your required quantity and target delivery location in the request.

Engineering reference data for ATF22V10C-10JI — comparison, design guidance, and compliance information.

Selection Guide

Choose ATF22V10C-10JI for industrial or legacy 28-pin PLCC designs that require a 10-macrocell ATF22V10C architecture, a 10 ns propagation delay, and electrically erasable Flash configuration. ATF22V10C-10JU is the direct same-package choice when its temperature qualification satisfies the product requirements. ATF22V10C-15JI preserves the macrocell count and footprint but trades 5 ns of additional propagation delay for its ordering configuration. ATF22V10C-10JC provides the same 10 ns speed grade in a commercial qualification, while ATF22V10C-7JI and ATF22V10C-5JI offer faster timing for designs with tighter path constraints. For every alternative, verify the exact package, temperature limits, supply range, fuse map, programmer support, and optional power-down pin behavior before approving a substitution.

Comparison with Alternatives

Parameter This Product ATF22V10C-10JU ATF22V10C-15JI ATF22V10C-10JC ATF22V10C-7JI ATF22V10C-5JI
Package 28-PLCC (11.51x11.51) 28-PLCC (11.51x11.51) 28-PLCC (11.51x11.51) 28-PLCC (11.51x11.51) 28-PLCC (11.51x11.51) 28-PLCC (11.51x11.51)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Propagation Delay 10 ns 10 ns 15 ns 10 ns 7 ns 5 ns
Configuration Technology Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory
Nominal Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Power-Down Feature Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down

Key Differentiators

  • Matches the industrial 10 ns ordering configuration (vs ATF22V10C-10JC)
  • Faster than the 15 ns family alternative (vs ATF22V10C-15JI)
  • Provides a conservative timing upgrade without changing speed grade (vs ATF22V10C-10JU)
  • Faster switching margin than the target device (vs ATF22V10C-7JI)

Design Notes

Do not treat the ATF22V10C as a fuse-programmed GAL22V10 without checking the programming workflow. Although the devices are pin-to-pin and JEDEC fusemap compatible, the ATF22V10C uses electrically erasable Flash technology. Select a programmer and software release that explicitly supports the ATF22V10C architecture, then verify the programmed fuse map against the original design.

Assign PLCC nets strictly from the manufacturer pin-description table, including the optional power-down function on pin 5. Preserve the package orientation and pin-1 marking on the PCB, and avoid placing high-current or fast-switching traces beside the device unless the ground-return path is controlled. The J-lead footprint is intended for surface mounting and may require a thermal consideration in temperature-cycling applications.

Validate every registered-output path against the 10 ns speed grade, the 5 V plus or minus 10 percent military and industrial supply range, and the required external load. For address or control buses, simulate both valid and illegal state transitions and include reset behavior. Where an external signal enters the PLD asynchronously, constrain the design to the electrical limits in the manufacturer datasheet rather than relying on nominal logic timing alone.

The manufacturer describes power dissipation as low as 10 microamps for the ATF22V10C family, but that family-level figure does not define the final board power. Estimate the device dissipation from the actual supply voltage, output load, switching activity, and selected speed grade. Provide local supply decoupling and a stable 5 V source, particularly when the PLD controls signals connected to higher-current external devices.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The ATF22V10C family is a legacy industrial programmable logic device, and no specific environmental compliance claims were identified for the exact ordering code. JEDEC fusemap compatibility is identified by the manufacturer.

Related Searches

atf22v10c datasheet atf22v10c programming atf22v10c pinout atf22v10c programmable logic device ATF22V10C-10JI datasheet ATF22V10C-10JI pinout ATF22V10C-10JI programming ATF22V10C-10JI equivalent ATF22V10C-10JI replacement ATF22V10C-10JI cross reference ATF22V10C-10JI vs ATF22V10C-10JU ATF22V10C-10JI 28-PLCC pinout Microchip ATF22V10C-10JI ATF22V10C-10JI price ATF22V10C-10JI stock

Related Components & Terms

Microchip Technology ATF22V10C-10JI ATF22V10C ATF22V10C-10JU ATF22V10C-15JI ATF22V10C-10JC ATF22V10C-7JI ATF22V10C-5JI programmable logic device PLD electrically erasable Flash memory CMOS GAL22V10 JEDEC fusemap 10-macrocell architecture 10 ns propagation delay 28-pin PLCC J-lead package surface-mount package power-down pin industrial control bus address decoding legacy peripheral emulation small state machine
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details