Microchip Technology

ATSAME51J18A-MU - 120MHz Cortex-M4F MCU | Microchip

MPN: ATSAME51J18A-MU ✓ نشط
64-pin VQFN Package 120 MHz Speed 256 KB Memory
الحد الأدنى للطلب: 1 |

ATSAME51J18A-MU نظرة عامة

Microchip Technology ATSAME51J18A-MU is a 32-bit SAM E51 microcontroller built around an Arm Cortex-M4F processor with a floating-point unit, operating up to 120 MHz. It provides 256 KB of embedded Flash and is packaged in a 64-pin VQFN measuring 9 mm by 9 mm. The combination of Cortex-M4F performance, compact packaging, and embedded memory makes this device suitable for industrial control, connected equipment, data acquisition, and compact embedded systems.

A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The ATSAME51J18A-MU belongs to the SAM E51 family, which combines an Arm Cortex-M4F core with floating-point arithmetic and a broad collection of communication and control peripherals. Its 256 KB Flash stores the application firmware, while the integrated SRAM supports working data, stacks, and real-time control algorithms.

Key features include a 120 MHz maximum operating frequency, 32-bit processing, and hardware floating-point support. The 256 KB Flash configuration provides sufficient code density for protocol stacks, control logic, communications services, and field-upgrade routines. The 64-VQFN package supports compact PCB layouts while exposing the mixed-signal, serial-interface, timer, and debug functions required by embedded designs.

The Cortex-M4F architecture is suitable for real-time workloads that need more than basic integer control. Its floating-point unit accelerates calculations involving scaling, filtering, sensor compensation, and motor-control loops without requiring a separate DSP. Peripheral integration reduces external component count by placing communication, timing, analog conversion, and debug functions on the same MCU. Firmware can be developed through the Microchip toolchain and supported Arm development environments.

Typical applications include industrial sensor controllers, compact data-acquisition modules, building-control equipment, motor and motion-control controllers, communications equipment, and consumer or medical-adjacent devices requiring a small, high-performance mixed-signal MCU. The 9 mm by 9 mm VQFN is especially useful where PCB area is constrained but a full 64-pin peripheral complement is still required.

PCB design should follow the package drawing and pin-description table in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, preserve a continuous ground reference beneath the device where the package construction permits, and route high-speed or sensitive analog signals away from switching nodes. Programming and debug access must also be planned early so connector and test-point placement does not constrain the final layout.

This product page combines the manufacturer family information with engineering-focused comparison, application, and design guidance. It also identifies verified drop-in alternatives where the exact package and electrical compatibility can be established, helping hardware teams evaluate migration, sourcing, and prototype-planning options more efficiently.

بدائل مباشرة لـ ATSAME51J18A-MU — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ATSAME51J18A-MU (نفس عامل الشكل والبصمة) — يختلف في Package, ADC, CAN, Core, DAC.

Microchip Technology
Package: 64-VQFN (9x9 mm) with exposed pad
ADC: 12-bit, up to 1 MSPS
CAN: CAN-FD
قارن مع ATSAME51J18A-MU →
Microchip Technology
Package: 64-VQFN (9x9 mm) with exposed pad
ADC: 16-channel, 12-bit, 1 Msps
CAN: CAN-FD controller
قارن مع ATSAME51J18A-MU →

ATSAME51J18A-MUT-EFP

✅ بديل مباشر
📦 64-VQFN
The EFP ordering option adds extended Flash performance and a tape-and-reel configuration while retaining the 64-QFN package and 256 KB Flash class; CPU frequency remains 120 MHz

📋 بديل مرجعي (غير موجود في الكتالوج)

ATSAME51J18A-MU الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M4F microcontroller
Product Family SAM E51
Processor Core Arm Cortex-M4F
Maximum CPU Frequency 120 MHz
Instruction Width 32 bit
Embedded Flash Memory 256 KB
Flash Organization 256K x 8 bits
SRAM Capacity Up to 256 KB
Floating-Point Unit Yes
العلبة 64-pin VQFN
Package Body Size 9 mm x 9 mm
نوع التركيب Surface mount
عدد الدبابيس 64 pins
Target Applications Industrial and general-purpose applications

دليل تكوين أطراف ATSAME51J18A-MU 9 mm x 9 mm

تكوين الأطراف لـ ATSAME51J18A-MU (حزمة 9 mm x 9 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 9 mm x 9 mm لـ ATSAME51J18A-MU

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATSAME51J18A-MU.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ATSAME51J18A-MU مناسب لـ 6 التطبيقs: Industrial Sensor Controller, Compact Data Acquisition Module, Motor and Motion Control, Building Automation Equipment, Connected Communications Equipment, Compact Consumer Control Module.

🏭

Industrial Sensor Controller

The ATSAME51J18A-MU fits compact industrial sensor controllers because its 120 MHz Cortex-M4F core can execute acquisition routines, filtering, and control logic while the hardware floating-point unit accelerates calibration and compensation calculations. Its 256 KB embedded Flash provides room for application firmware, communication protocols, and diagnostic routines. The 64-VQFN 9 mm by 9 mm package reduces board area, while integrated timers, serial interfaces, and analog functions can minimize external circuitry. Designers should verify the required ADC resolution, input bandwidth, operating-temperature range, and calibration accuracy for the selected sensors before finalizing the analog front end.

📡

Compact Data Acquisition Module

The ATSAME51J18A-MU is appropriate for compact data-acquisition modules that sample sensors, process results, and forward information over a serial link. The 32-bit Cortex-M4F core running up to 120 MHz supports timing-sensitive acquisition and the floating-point unit assists with digital filtering and calibration. With 256 KB Flash, the controller can combine firmware, protocol handling, and configuration storage in one device. The 64-VQFN package preserves access to a broad peripheral complement in a small footprint. Confirm analog input count, ADC characteristics, sample-rate requirements, reference strategy, and digital-interface timing during design selection.

⚡

Motor and Motion Control

The ATSAME51J18A-MU supports motor and motion-control designs requiring deterministic computation, multiple timing resources, and flexible serial connectivity. Its Cortex-M4F core can execute current-control, position-control, and fault-handling algorithms at up to 120 MHz, while hardware floating-point arithmetic improves the efficiency of transforms and compensators. The 256 KB Flash capacity accommodates control code plus diagnostics, and the compact 64-VQFN package is useful for space-constrained drives. Power-stage isolation, gate-driver timing, current sensing, thermal protection, and the exact PWM and timer assignments must be validated in the manufacturer peripheral documentation.

🏠

Building Automation Equipment

The ATSAME51J18A-MU is well suited to building-automation equipment that coordinates sensors, communications, and local control functions. Its 120 MHz Cortex-M4F performance permits responsive protocol handling and embedded logic, while the hardware floating-point unit assists with environmental calculations and compensation. The 256 KB Flash supports networking stacks, configuration logic, and update mechanisms, and the 9 mm by 9 mm VQFN supports compact controller boards. Engineering teams should verify the required communication peripherals, low-power modes, EMC considerations, temperature range, and long-term supply expectations for the installed equipment.

🌐

Connected Communications Equipment

The ATSAME51J18A-MU can serve as the main controller in compact communications equipment requiring real-time protocol handling and configurable serial interfaces. The Cortex-M4F core operates up to 120 MHz, providing capacity for framing, buffering, encryption-related processing, and supervisory logic, while 256 KB Flash stores firmware and communication parameters. The compact 64-VQFN package is advantageous in gateways, interface modules, and embedded protocol converters. Confirm the required UART, SPI, I2C, or other interface counts, clock-tree needs, USB requirements, transceiver characteristics, and environmental limits before assigning the device.

📱

Compact Consumer Control Module

The ATSAME51J18A-MU can implement compact consumer-control modules that combine user inputs, status indication, communications, and embedded logic in a small board area. Its 120 MHz Cortex-M4F core and hardware floating-point unit support responsive application behavior without a separate processor, and 256 KB Flash accommodates control firmware and configuration. The 64-VQFN package reduces the footprint relative to larger leaded devices. For consumer products, review the exact electrical limits, operating-temperature grade, ESD requirements, regulatory obligations, power consumption, and product-lifecycle expectations before approving the MCU.

ملخص المنتجات الموصى بها

ATSAME51J18A-MUT-EFP Same-family MCU option with 256 KB Flash and QFN-64 package يُستخدم في: Industrial Sensor Controller, Compact Data Acquisition Module, Motor and Motion Control, Building Automation Equipment, Connected Communications Equipment, Compact Consumer Control Module ATSAME51J18A-MU Microchip Technology يُستخدم في: Industrial Sensor Controller, Compact Data Acquisition Module, Motor and Motion Control, Building Automation Equipment, Connected Communications Equipment, Compact Consumer Control Module
What are the key specifications of ATSAME51J18A-MU that engineers should know?
The ATSAME51J18A-MU is a 32-bit Arm Cortex-M4F microcontroller with a floating-point unit, a maximum CPU frequency of 120 MHz, and 256 KB of embedded Flash. Microchip Technology identifies the device as part of the SAM E51 family and packages it in a 64-VQFN measuring 9 mm by 9 mm. According to the manufacturer product page, the family targets industrial and general-purpose applications.
What is the operating frequency of ATSAME51J18A-MU?
The ATSAME51J18A-MU operates at up to 120 MHz. Its 32-bit Arm Cortex-M4F core combines integer execution with a hardware floating-point unit, making it appropriate for real-time control, sensor processing, and communications firmware. According to the Microchip Technology product page, the SAM E51 series is built around the Cortex-M4 processor with an FPU running up to 120 MHz.
How much Flash memory does ATSAME51J18A-MU contain?
The ATSAME51J18A-MU contains 256 KB of embedded Flash organized as 256K by 8 bits. According to the Microchip Technology product page, the SAM E51 family supports configurations with up to 1 MB of dual-panel Flash with ECC, while the J18A configuration is identified in product listings as the 256 KB version. Firmware capacity should be checked against linker-map requirements before production release.
What package does ATSAME51J18A-MU use?
The ATSAME51J18A-MU uses a 64-pin VQFN package measuring 9 mm by 9 mm. Microchip Technology describes the device as a high-performance SAM E51 microcontroller for industrial and general-purpose products. Use the manufacturer package drawing and pin-description table when assigning PCB land patterns, exposed-pad connections, and peripheral signals.
Where to download ATSAME51J18A-MU datasheet and pinout information?
The ATSAME51J18A-MU datasheet, package drawing, and pin description are available through the Microchip Technology product page linked on this page. The official ATSAME51J18A family data sheet covers electrical characteristics, memory, peripherals, and package details. For a new PCB, use the 64-VQFN pin table and land-pattern drawing from the manufacturer rather than relying on a generic QFN footprint.
Where can I buy ATSAME51J18A-MU online?
Use the Request a Quote form on this page to request ATSAME51J18A-MU availability, current commercial terms, and a delivery quotation. The quote request lets the purchasing team confirm the exact 64-VQFN ordering configuration, quantity, packaging requirement, and lead time without relying on a static price that may change. The MPN ATSAME51J18A-MU should be stated in the request.
What is the price of ATSAME51J18A-MU?
Current ATSAME51J18A-MU commercial pricing is obtained through the Request a Quote form on this page. Because market pricing can vary with quantity, package handling, inventory position, and delivery schedule, use the form for a quantity-specific quotation. This avoids presenting a stale catalog figure as a current purchasing commitment.
What is the lead time for ATSAME51J18A-MU?
The current lead time for ATSAME51J18A-MU should be confirmed through the Request a Quote form on this page. Include the required quantity, annual usage, approved vendor status, and target delivery date in the request. Microchip lifecycle and production planning should then be evaluated against the confirmed schedule before committing the design to volume manufacturing.
Is ATSAME51J18A-MU in stock?
Current ATSAME51J18A-MU stock and allocation status should be checked through the Request a Quote form on this page. Provide the required quantity and target ship date so the order can be matched to an appropriate manufacturing and distribution schedule. Avoid treating a distributor search result as a stock guarantee without written confirmation for the exact MPN.
What is the best drop-in replacement for ATSAME51J18A-MU?
A drop-in replacement for ATSAME51J18A-MU must retain the 64-VQFN footprint, pin assignment, 120 MHz Cortex-M4F architecture, 256 KB Flash configuration, and relevant peripheral functions. ATSAME51J18A-MUT-EFP is a same-package Microchip family option listed with a QFN-64 package and 256 KB Flash. Firmware, clock, flash-performance, and exposed-pad requirements should be compared before approving a substitution.
Can ATSAME51J18A-MUT-EFP replace ATSAME51J18A-MU?
ATSAME51J18A-MUT-EFP is a plausible same-package migration candidate because product listings identify it as a QFN-64 Cortex-M4F device with 256 KB Flash and a tape-and-reel ordering option. However, suffix changes can encode temperature, flash-performance, and packing options. According to the manufacturer ordering documentation, verify those fields and confirm the exposed-pad land pattern before treating it as a production drop-in replacement.
What can replace ATSAME51J18A-MU?
The closest replaceable device must use the same 64-VQFN 9 mm by 9 mm footprint and preserve the 256 KB Flash, Arm Cortex-M4F core, and peripheral mapping. ATSAME51J18A-MUT-EFP is the identified same-package candidate. A valid replacement also requires checking package drawing, pin multiplexing, clock limits, operating-temperature grade, and any flash-performance designation in the ordering information.
Is ATSAME51J18A-MU suitable for industrial control applications?
The ATSAME51J18A-MU is suitable for industrial control applications that require a 120 MHz Cortex-M4F core, 256 KB Flash, and a compact 64-VQFN package. Microchip Technology specifically targets the SAM E51 family at industrial and general-purpose products. Analog accuracy, serial-interface coverage, operating-temperature limits, safety requirements, and long-term availability must be checked against the individual subsystem specifications.
ATSAME51J18A-MU vs ATSAME51J18A-MUT-EFP: which is better for a new design?
Choose ATSAME51J18A-MU when its exact ordering suffix matches the required production configuration. Consider ATSAME51J18A-MUT-EFP when the design benefits from its documented extended-flash-performance option and the same 64-VQFN footprint remains appropriate. Both devices are associated with the 256 KB, 120 MHz Cortex-M4F SAM E51 class, but the ordering suffix, temperature grade, and packing must be compared before selection.
When should I choose ATSAME51J18A-MU over another Cortex-M4F MCU?
Choose ATSAME51J18A-MU when the design needs the combination of a 120 MHz Arm Cortex-M4F core, 256 KB Flash, integrated floating-point hardware, and a 9 mm by 9 mm 64-VQFN package. The device is particularly suitable for compact industrial controllers, acquisition systems, and communications equipment. Select another MCU when its memory, analog performance, package, temperature rating, ecosystem, qualification, or lifecycle better matches the product requirements.

بيانات مرجعية هندسية لـ ATSAME51J18A-MU — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose ATSAME51J18A-MU when a design needs a 120 MHz Arm Cortex-M4F with hardware floating-point arithmetic, 256 KB embedded Flash, and a compact 64-VQFN footprint. It is particularly suitable for industrial controllers, data-acquisition modules, motion-control products, and connected equipment that need more computation than an entry-level microcontroller. ATSAME51J18A-MUT-EFP is the closest same-package alternative when its extended Flash-performance option and tape-and-reel ordering configuration match production requirements. Confirm the ordering suffix, temperature grade, exposed-pad layout, and device revision before migration. If the design requires substantially more Flash, SRAM, ADC resolution, or peripheral bandwidth, select a higher-end MCU rather than assuming this part meets requirements outside the stated 256 KB Flash configuration.

المقارنة مع البدائل

المعامل هذا المنتج ATSAME51J18A-MUT-EFP
Brand Microchip Technology Microchip Technology
Package 64-VQFN, 9 mm x 9 mm 64-QFN
Processor Core Arm Cortex-M4F Arm Cortex-M4F
Maximum CPU Frequency 120 MHz 120 MHz
Embedded Flash 256 KB 256 KB
Instruction Width 32 bit 32 bit
Floating-Point Unit Yes Yes
Ordering Option MU MUT-EFP

أبرز الفروقات

  • High-performance Cortex-M4F processing in a compact package (مقابلATSAME51J18A-MUT-EFP)
  • Defined embedded memory configuration (مقابلATSAME51J18A-MUT-EFP)
  • Compact 64-VQFN implementation (مقابلATSAME51J18A-MUT-EFP)

ملاحظات التصميم

Build the layout from the manufacturer 64-VQFN land pattern rather than a generic QFN footprint. Confirm pad dimensions, pin numbering, exposed-pad geometry, solder mask, and paste recommendations for the exact ordering configuration. Place each supply decoupling capacitor adjacent to its associated power pin and connect the exposed thermal pad through a package-specific solder pattern to establish a low-impedance ground and thermal path.

Route high-speed signals on continuous reference planes and keep sensitive analog inputs away from digital clocks, switching regulators, and fast edge currents. Use the manufacturer peripheral multiplexing tables to avoid conflicts between communication functions, timers, and debugging interfaces. If precision conversion or measurement is required, segregate analog and digital return paths and follow the recommended reference and bypass-component placement around the MCU.

Do not approve a substitute from the base MPN alone. Ordering suffixes can change package dimensions, temperature grade, packing, and Flash-performance options. For ATSAME51J18A-MUT-EFP, compare the ordering-information table, device revision, exposed-pad requirements, memory configuration, and peripheral functions with ATSAME51J18A-MU. Also reserve programming and debug access according to the supported SWD or other debug-interface configuration.

Estimate junction temperature from the actual processor activity, ambient temperature, board copper, and package thermal characteristics rather than assuming the exposed pad alone guarantees cooling. The 120 MHz operating rate can raise dynamic power compared with low-frequency operation. Preserve thermal-via and copper-plane recommendations from the package documentation, and validate the final assembly under worst-case clock, I/O, and ambient conditions.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product page and listed product summaries do not explicitly state the requested compliance declarations. AEC-Q100 is not applicable because ATSAME51J18A-MU is an industrial and general-purpose microcontroller rather than an automotive-qualified variant.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ATSAME51J18A-MU datasheet ATSAME51J18A-MU pinout ATSAME51J18A-MU datasheet pdf ATSAME51J18A-MU equivalent ATSAME51J18A-MU replacement ATSAME51J18A-MU price ATSAME51J18A-MU stock Microchip ATSAME51J18A-MU ATSAME51J18A 120MHz Cortex-M4F ATSAME51J18A-MU VQFN-64 ATSAME51J18A-MU vs ATSAME51J18A-MUT-EFP ATSAME51J18A industrial controller

المكونات والمصطلحات ذات الصلة

Microchip Technology ATSAME51J18A-MU ATSAME51J18A-MUT-EFP SAM E51 Arm Cortex-M4F ARM Cortex-M4 processor microcontroller 32-bit microcontroller embedded microcontroller floating-point unit 120 MHz 256 KB Flash 64-VQFN QFN package family surface-mount package industrial control data acquisition motor control building automation communication equipment embedded Flash SRAM
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر