ATSAME51J18A-MU - 120MHz Cortex-M4F MCU | Microchip
料号: ATSAME51J18A-MU ✓ 量产中ATSAME51J18A-MU 概述
A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The ATSAME51J18A-MU belongs to the SAM E51 family, which combines an Arm Cortex-M4F core with floating-point arithmetic and a broad collection of communication and control peripherals. Its 256 KB Flash stores the application firmware, while the integrated SRAM supports working data, stacks, and real-time control algorithms.
Key features include a 120 MHz maximum operating frequency, 32-bit processing, and hardware floating-point support. The 256 KB Flash configuration provides sufficient code density for protocol stacks, control logic, communications services, and field-upgrade routines. The 64-VQFN package supports compact PCB layouts while exposing the mixed-signal, serial-interface, timer, and debug functions required by embedded designs.
The Cortex-M4F architecture is suitable for real-time workloads that need more than basic integer control. Its floating-point unit accelerates calculations involving scaling, filtering, sensor compensation, and motor-control loops without requiring a separate DSP. Peripheral integration reduces external component count by placing communication, timing, analog conversion, and debug functions on the same MCU. Firmware can be developed through the Microchip toolchain and supported Arm development environments.
Typical applications include industrial sensor controllers, compact data-acquisition modules, building-control equipment, motor and motion-control controllers, communications equipment, and consumer or medical-adjacent devices requiring a small, high-performance mixed-signal MCU. The 9 mm by 9 mm VQFN is especially useful where PCB area is constrained but a full 64-pin peripheral complement is still required.
PCB design should follow the package drawing and pin-description table in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, preserve a continuous ground reference beneath the device where the package construction permits, and route high-speed or sensitive analog signals away from switching nodes. Programming and debug access must also be planned early so connector and test-point placement does not constrain the final layout.
This product page combines the manufacturer family information with engineering-focused comparison, application, and design guidance. It also identifies verified drop-in alternatives where the exact package and electrical compatibility can be established, helping hardware teams evaluate migration, sourcing, and prototype-planning options more efficiently.
直接替换替代料: ATSAME51J18A-MU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATSAME51J18A-MU (相同外形与封装尺寸) ——差异在于 Package, ADC, CAN, Core, DAC.
ATSAME51J18A-MUT-EFP
✅ 直接替换📋 参考替代料(不在目录中)
ATSAME51J18A-MU 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Product Family | SAM E51 |
| Processor Core | Arm Cortex-M4F |
| Maximum CPU Frequency | 120 MHz |
| Instruction Width | 32 bit |
| Embedded Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM Capacity | Up to 256 KB |
| Floating-Point Unit | Yes |
| 封装 | 64-pin VQFN |
| Package Body Size | 9 mm x 9 mm |
| 安装类型 | Surface mount |
| 引脚数 | 64 pins |
| Target Applications | Industrial and general-purpose applications |
ATSAME51J18A-MU 9 mm x 9 mm 引脚配置指南
ATSAME51J18A-MU(9 mm x 9 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATSAME51J18A-MU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAME51J18A-MU 适用于 6 应用s: Industrial Sensor Controller, Compact Data Acquisition Module, Motor and Motion Control, Building Automation Equipment, Connected Communications Equipment, Compact Consumer Control Module.
Industrial Sensor Controller
The ATSAME51J18A-MU fits compact industrial sensor controllers because its 120 MHz Cortex-M4F core can execute acquisition routines, filtering, and control logic while the hardware floating-point unit accelerates calibration and compensation calculations. Its 256 KB embedded Flash provides room for application firmware, communication protocols, and diagnostic routines. The 64-VQFN 9 mm by 9 mm package reduces board area, while integrated timers, serial interfaces, and analog functions can minimize external circuitry. Designers should verify the required ADC resolution, input bandwidth, operating-temperature range, and calibration accuracy for the selected sensors before finalizing the analog front end.
推荐
Compact Data Acquisition Module
The ATSAME51J18A-MU is appropriate for compact data-acquisition modules that sample sensors, process results, and forward information over a serial link. The 32-bit Cortex-M4F core running up to 120 MHz supports timing-sensitive acquisition and the floating-point unit assists with digital filtering and calibration. With 256 KB Flash, the controller can combine firmware, protocol handling, and configuration storage in one device. The 64-VQFN package preserves access to a broad peripheral complement in a small footprint. Confirm analog input count, ADC characteristics, sample-rate requirements, reference strategy, and digital-interface timing during design selection.
推荐
Motor and Motion Control
The ATSAME51J18A-MU supports motor and motion-control designs requiring deterministic computation, multiple timing resources, and flexible serial connectivity. Its Cortex-M4F core can execute current-control, position-control, and fault-handling algorithms at up to 120 MHz, while hardware floating-point arithmetic improves the efficiency of transforms and compensators. The 256 KB Flash capacity accommodates control code plus diagnostics, and the compact 64-VQFN package is useful for space-constrained drives. Power-stage isolation, gate-driver timing, current sensing, thermal protection, and the exact PWM and timer assignments must be validated in the manufacturer peripheral documentation.
推荐
Building Automation Equipment
The ATSAME51J18A-MU is well suited to building-automation equipment that coordinates sensors, communications, and local control functions. Its 120 MHz Cortex-M4F performance permits responsive protocol handling and embedded logic, while the hardware floating-point unit assists with environmental calculations and compensation. The 256 KB Flash supports networking stacks, configuration logic, and update mechanisms, and the 9 mm by 9 mm VQFN supports compact controller boards. Engineering teams should verify the required communication peripherals, low-power modes, EMC considerations, temperature range, and long-term supply expectations for the installed equipment.
推荐
Connected Communications Equipment
The ATSAME51J18A-MU can serve as the main controller in compact communications equipment requiring real-time protocol handling and configurable serial interfaces. The Cortex-M4F core operates up to 120 MHz, providing capacity for framing, buffering, encryption-related processing, and supervisory logic, while 256 KB Flash stores firmware and communication parameters. The compact 64-VQFN package is advantageous in gateways, interface modules, and embedded protocol converters. Confirm the required UART, SPI, I2C, or other interface counts, clock-tree needs, USB requirements, transceiver characteristics, and environmental limits before assigning the device.
推荐
Compact Consumer Control Module
The ATSAME51J18A-MU can implement compact consumer-control modules that combine user inputs, status indication, communications, and embedded logic in a small board area. Its 120 MHz Cortex-M4F core and hardware floating-point unit support responsive application behavior without a separate processor, and 256 KB Flash accommodates control firmware and configuration. The 64-VQFN package reduces the footprint relative to larger leaded devices. For consumer products, review the exact electrical limits, operating-temperature grade, ESD requirements, regulatory obligations, power consumption, and product-lifecycle expectations before approving the MCU.
推荐
推荐产品汇总
工程参考数据: ATSAME51J18A-MU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAME51J18A-MUT-EFP |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-VQFN, 9 mm x 9 mm | 64-QFN |
| Processor Core | Arm Cortex-M4F | Arm Cortex-M4F |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Embedded Flash | 256 KB | 256 KB |
| Instruction Width | 32 bit | 32 bit |
| Floating-Point Unit | Yes | Yes |
| Ordering Option | MU | MUT-EFP |
关键差异点
- High-performance Cortex-M4F processing in a compact package (对比 ATSAME51J18A-MUT-EFP)
- Defined embedded memory configuration (对比 ATSAME51J18A-MUT-EFP)
- Compact 64-VQFN implementation (对比 ATSAME51J18A-MUT-EFP)
设计说明
Build the layout from the manufacturer 64-VQFN land pattern rather than a generic QFN footprint. Confirm pad dimensions, pin numbering, exposed-pad geometry, solder mask, and paste recommendations for the exact ordering configuration. Place each supply decoupling capacitor adjacent to its associated power pin and connect the exposed thermal pad through a package-specific solder pattern to establish a low-impedance ground and thermal path.
Route high-speed signals on continuous reference planes and keep sensitive analog inputs away from digital clocks, switching regulators, and fast edge currents. Use the manufacturer peripheral multiplexing tables to avoid conflicts between communication functions, timers, and debugging interfaces. If precision conversion or measurement is required, segregate analog and digital return paths and follow the recommended reference and bypass-component placement around the MCU.
Do not approve a substitute from the base MPN alone. Ordering suffixes can change package dimensions, temperature grade, packing, and Flash-performance options. For ATSAME51J18A-MUT-EFP, compare the ordering-information table, device revision, exposed-pad requirements, memory configuration, and peripheral functions with ATSAME51J18A-MU. Also reserve programming and debug access according to the supported SWD or other debug-interface configuration.
Estimate junction temperature from the actual processor activity, ambient temperature, board copper, and package thermal characteristics rather than assuming the exposed pad alone guarantees cooling. The 120 MHz operating rate can raise dynamic power compared with low-frequency operation. Preserve thermal-via and copper-plane recommendations from the package documentation, and validate the final assembly under worst-case clock, I/O, and ambient conditions.
合规信息
The manufacturer product page and listed product summaries do not explicitly state the requested compliance declarations. AEC-Q100 is not applicable because ATSAME51J18A-MU is an industrial and general-purpose microcontroller rather than an automotive-qualified variant.