ATSAME51J18A-MU - 120MHz Cortex-M4F MCU | Microchip
部品番号: ATSAME51J18A-MU ✓ 生産中ATSAME51J18A-MU 概要
A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The ATSAME51J18A-MU belongs to the SAM E51 family, which combines an Arm Cortex-M4F core with floating-point arithmetic and a broad collection of communication and control peripherals. Its 256 KB Flash stores the application firmware, while the integrated SRAM supports working data, stacks, and real-time control algorithms.
Key features include a 120 MHz maximum operating frequency, 32-bit processing, and hardware floating-point support. The 256 KB Flash configuration provides sufficient code density for protocol stacks, control logic, communications services, and field-upgrade routines. The 64-VQFN package supports compact PCB layouts while exposing the mixed-signal, serial-interface, timer, and debug functions required by embedded designs.
The Cortex-M4F architecture is suitable for real-time workloads that need more than basic integer control. Its floating-point unit accelerates calculations involving scaling, filtering, sensor compensation, and motor-control loops without requiring a separate DSP. Peripheral integration reduces external component count by placing communication, timing, analog conversion, and debug functions on the same MCU. Firmware can be developed through the Microchip toolchain and supported Arm development environments.
Typical applications include industrial sensor controllers, compact data-acquisition modules, building-control equipment, motor and motion-control controllers, communications equipment, and consumer or medical-adjacent devices requiring a small, high-performance mixed-signal MCU. The 9 mm by 9 mm VQFN is especially useful where PCB area is constrained but a full 64-pin peripheral complement is still required.
PCB design should follow the package drawing and pin-description table in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, preserve a continuous ground reference beneath the device where the package construction permits, and route high-speed or sensitive analog signals away from switching nodes. Programming and debug access must also be planned early so connector and test-point placement does not constrain the final layout.
This product page combines the manufacturer family information with engineering-focused comparison, application, and design guidance. It also identifies verified drop-in alternatives where the exact package and electrical compatibility can be established, helping hardware teams evaluate migration, sourcing, and prototype-planning options more efficiently.
ドロップイン代替品: ATSAME51J18A-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAME51J18A-MU (同一形状・フットプリント) — 相違点: Package, ADC, CAN, Core, DAC.
ATSAME51J18A-MUT-EFP
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAME51J18A-MU 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Product Family | SAM E51 |
| Processor Core | Arm Cortex-M4F |
| Maximum CPU Frequency | 120 MHz |
| Instruction Width | 32 bit |
| Embedded Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM Capacity | Up to 256 KB |
| Floating-Point Unit | Yes |
| パッケージ | 64-pin VQFN |
| Package Body Size | 9 mm x 9 mm |
| 実装タイプ | Surface mount |
| ピン数 | 64 pins |
| Target Applications | Industrial and general-purpose applications |
ATSAME51J18A-MU 9 mm x 9 mm ピン配置ガイド
ATSAME51J18A-MU (9 mm x 9 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAME51J18A-MU.
詳細は データシート をご参照ください。
主な用途
ATSAME51J18A-MU の用途: 6 件s: Industrial Sensor Controller, Compact Data Acquisition Module, Motor and Motion Control, Building Automation Equipment, Connected Communications Equipment, Compact Consumer Control Module.
Industrial Sensor Controller
The ATSAME51J18A-MU fits compact industrial sensor controllers because its 120 MHz Cortex-M4F core can execute acquisition routines, filtering, and control logic while the hardware floating-point unit accelerates calibration and compensation calculations. Its 256 KB embedded Flash provides room for application firmware, communication protocols, and diagnostic routines. The 64-VQFN 9 mm by 9 mm package reduces board area, while integrated timers, serial interfaces, and analog functions can minimize external circuitry. Designers should verify the required ADC resolution, input bandwidth, operating-temperature range, and calibration accuracy for the selected sensors before finalizing the analog front end.
おすすめ
Compact Data Acquisition Module
The ATSAME51J18A-MU is appropriate for compact data-acquisition modules that sample sensors, process results, and forward information over a serial link. The 32-bit Cortex-M4F core running up to 120 MHz supports timing-sensitive acquisition and the floating-point unit assists with digital filtering and calibration. With 256 KB Flash, the controller can combine firmware, protocol handling, and configuration storage in one device. The 64-VQFN package preserves access to a broad peripheral complement in a small footprint. Confirm analog input count, ADC characteristics, sample-rate requirements, reference strategy, and digital-interface timing during design selection.
おすすめ
Motor and Motion Control
The ATSAME51J18A-MU supports motor and motion-control designs requiring deterministic computation, multiple timing resources, and flexible serial connectivity. Its Cortex-M4F core can execute current-control, position-control, and fault-handling algorithms at up to 120 MHz, while hardware floating-point arithmetic improves the efficiency of transforms and compensators. The 256 KB Flash capacity accommodates control code plus diagnostics, and the compact 64-VQFN package is useful for space-constrained drives. Power-stage isolation, gate-driver timing, current sensing, thermal protection, and the exact PWM and timer assignments must be validated in the manufacturer peripheral documentation.
おすすめ
Building Automation Equipment
The ATSAME51J18A-MU is well suited to building-automation equipment that coordinates sensors, communications, and local control functions. Its 120 MHz Cortex-M4F performance permits responsive protocol handling and embedded logic, while the hardware floating-point unit assists with environmental calculations and compensation. The 256 KB Flash supports networking stacks, configuration logic, and update mechanisms, and the 9 mm by 9 mm VQFN supports compact controller boards. Engineering teams should verify the required communication peripherals, low-power modes, EMC considerations, temperature range, and long-term supply expectations for the installed equipment.
おすすめ
Connected Communications Equipment
The ATSAME51J18A-MU can serve as the main controller in compact communications equipment requiring real-time protocol handling and configurable serial interfaces. The Cortex-M4F core operates up to 120 MHz, providing capacity for framing, buffering, encryption-related processing, and supervisory logic, while 256 KB Flash stores firmware and communication parameters. The compact 64-VQFN package is advantageous in gateways, interface modules, and embedded protocol converters. Confirm the required UART, SPI, I2C, or other interface counts, clock-tree needs, USB requirements, transceiver characteristics, and environmental limits before assigning the device.
おすすめ
Compact Consumer Control Module
The ATSAME51J18A-MU can implement compact consumer-control modules that combine user inputs, status indication, communications, and embedded logic in a small board area. Its 120 MHz Cortex-M4F core and hardware floating-point unit support responsive application behavior without a separate processor, and 256 KB Flash accommodates control firmware and configuration. The 64-VQFN package reduces the footprint relative to larger leaded devices. For consumer products, review the exact electrical limits, operating-temperature grade, ESD requirements, regulatory obligations, power consumption, and product-lifecycle expectations before approving the MCU.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAME51J18A-MU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAME51J18A-MUT-EFP |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-VQFN, 9 mm x 9 mm | 64-QFN |
| Processor Core | Arm Cortex-M4F | Arm Cortex-M4F |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Embedded Flash | 256 KB | 256 KB |
| Instruction Width | 32 bit | 32 bit |
| Floating-Point Unit | Yes | Yes |
| Ordering Option | MU | MUT-EFP |
主な差別化要因
- High-performance Cortex-M4F processing in a compact package (vs ATSAME51J18A-MUT-EFP)
- Defined embedded memory configuration (vs ATSAME51J18A-MUT-EFP)
- Compact 64-VQFN implementation (vs ATSAME51J18A-MUT-EFP)
設計ノート
Build the layout from the manufacturer 64-VQFN land pattern rather than a generic QFN footprint. Confirm pad dimensions, pin numbering, exposed-pad geometry, solder mask, and paste recommendations for the exact ordering configuration. Place each supply decoupling capacitor adjacent to its associated power pin and connect the exposed thermal pad through a package-specific solder pattern to establish a low-impedance ground and thermal path.
Route high-speed signals on continuous reference planes and keep sensitive analog inputs away from digital clocks, switching regulators, and fast edge currents. Use the manufacturer peripheral multiplexing tables to avoid conflicts between communication functions, timers, and debugging interfaces. If precision conversion or measurement is required, segregate analog and digital return paths and follow the recommended reference and bypass-component placement around the MCU.
Do not approve a substitute from the base MPN alone. Ordering suffixes can change package dimensions, temperature grade, packing, and Flash-performance options. For ATSAME51J18A-MUT-EFP, compare the ordering-information table, device revision, exposed-pad requirements, memory configuration, and peripheral functions with ATSAME51J18A-MU. Also reserve programming and debug access according to the supported SWD or other debug-interface configuration.
Estimate junction temperature from the actual processor activity, ambient temperature, board copper, and package thermal characteristics rather than assuming the exposed pad alone guarantees cooling. The 120 MHz operating rate can raise dynamic power compared with low-frequency operation. Preserve thermal-via and copper-plane recommendations from the package documentation, and validate the final assembly under worst-case clock, I/O, and ambient conditions.
コンプライアンス情報
The manufacturer product page and listed product summaries do not explicitly state the requested compliance declarations. AEC-Q100 is not applicable because ATSAME51J18A-MU is an industrial and general-purpose microcontroller rather than an automotive-qualified variant.