DSPIC30F6013AT-20E/PF - 16-bit DSC 30MIPS 132KB Flash | Microchip
MPN: DSPIC30F6013AT-20E/PF ✓ نشطDSPIC30F6013AT-20E/PF نظرة عامة
A Digital Signal Controller is a hybrid architecture that merges a modified Harvard RISC CPU with dedicated DSP computational blocks. DSCs fill the architectural gap between traditional 8/16-bit microcontrollers (which lack real-time signal processing throughput) and standalone DSPs (which lack integrated peripherals for system control). The dsPIC30F family is designed for embedded motor control, power conversion, and audio processing applications where deterministic DSP performance is required alongside general-purpose control.
Key features of the DSPIC30F6013AT-20E/PF include a 16 x 16-bit single-cycle hardware MAC (multiply-accumulate) engine, dual 40-bit accumulators, a 12-bit ADC with up to 16 channels, a 16-bit Motor Control PWM module with up to 8 outputs, encoder interface hardware, and a rich communication peripheral set: two CAN modules, two UART/USART, SPI, and I2C. The -20E speed grade specifies an extended operating temperature range of -40C to +125C.
The architecture centers on a 16-bit dsPIC core built on a modified Harvard structure with separate 24-bit instruction and 16-bit data paths. DSP operations are handled by the integrated MAC engine with dual 40-bit accumulators, allowing sustained single-cycle 16x16 multiply operations. The deterministic interrupt structure and zero-overhead looping enable real-time DSP control loops typical of field-oriented motor control and digital power conversion.
Typical applications include three-phase AC induction and BLDC motor drives (sensored and sensorless), uninterruptible power supplies (UPS), digital power-factor correction (PFC) converters, audio processing and effects units, and automotive sensor signal conditioning. The integrated CAN, encoder interface, and motor-control PWM simplify inverter-stage designs significantly.
When designing with the DSPIC30F6013AT-20E/PF, ensure adequate decoupling on the analog AVLD rail serving the ADC, and follow the PCB layout recommendations for the motor-control PWM outputs to minimize switching noise coupling. The 'A' suffix denotes an enhanced analog front end (12-bit ADC) and the 'T' suffix denotes Tape & Reel packaging; '20E' denotes the 20 MIPS speed grade and extended temperature range.
This page synthesizes distributor pricing, drop-in alternatives sourced from manufacturer cross-reference data, and practical design notes not aggregated on any single manufacturer page.
بدائل مباشرة لـ DSPIC30F6013AT-20E/PF — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع DSPIC30F6013AT-20E/PF (نفس عامل الشكل والبصمة) — يختلف في Package, Core Architecture, ADC, Operating Temperature, I/O Pins.
DSPIC30F6013A-30I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6013A-20E/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6012AT-30I/PF
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6013-20I/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6013A-30I/PT
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6013AT-20E/PF الحدود القصوى والخصائص الكهربائية
| Core Architecture | 16-bit dsPIC30F (modified Harvard RISC + DSP) |
| Program Memory (Flash) | 132 KB (44K x 24) |
| Data Memory (SRAM) | 6 KB |
| EEPROM | 2 KB (2K x 8) |
| Maximum CPU Speed | 20 MIPS (40 MHz oscillator) |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| I/O Pins | 60 |
| العلبة | TQFP-80 (PF), 12x12 mm body |
| ADC | 12-bit, up to 16 channels |
| Motor Control PWM | 16-bit, up to 8 output channels |
| Communication | 2x CAN, 2x UART, SPI, I2C |
| DSP Engine | 16 x 16-bit single-cycle MAC, dual 40-bit accumulators |
| درجة حرارة التشغيل | -40 C to +125 C (extended, 'E' grade) |
| نوع التركيب | Surface Mount |
| مستوى MSL | 3 |
| حالة RoHS | Compliant (lead-free per datasheet package code 'PF') |
تكوين أطراف DSPIC30F6013AT-20E/PF
| دبوس 1 | EMUC2/RA11 — EMU/tracing; or I/O port RA11 |
| دبوس 2 | RA10 — I/O port RA10 |
| دبوس 3 | RA9 — I/O port RA9 |
| دبوس 4 | RA8 — I/O port RA8 |
| دبوس 5 | VDD — Positive supply for digital logic |
| دبوس 6 | VSS — Digital ground |
| دبوس 7 | OSC1/CLKIN — Crystal oscillator input / external clock in |
| دبوس 8 | OSC2/CLKOUT — Crystal oscillator output / clock out |
| دبوس 9 | MCLR — Master clear (reset) input |
| دبوس 10 | RB15/REFO — I/O port RB15 or reference clock output |
| دبوس 11 | RB14 — I/O port RB14 |
| دبوس 12 | RB13 — I/O port RB13 |
| دبوس 13 | RB12 — I/O port RB12 |
| دبوس 14 | RB11 — I/O port RB11 |
| دبوس 15 | RB10 — I/O port RB10 |
| دبوس 16 | RB9 — I/O port RB9 |
| دبوس 17 | RB8 — I/O port RB8 |
| دبوس 18 | RB7 — I/O port RB7 |
| دبوس 19 | RB6 — I/O port RB6 |
| دبوس 20 | RB5 — I/O port RB5 |
| دبوس 21 | RB4 — I/O port RB4 |
| دبوس 22 | RB3 — I/O port RB3 |
| دبوس 23 | RB2 — I/O port RB2 |
| دبوس 24 | RB1 — I/O port RB1 |
| دبوس 25 | RB0 — I/O port RB0 |
| دبوس 26 | RF6 — I/O port RF6 |
| دبوس 27 | RF5 — I/O port RF5 |
| دبوس 28 | RF4 — I/O port RF4 |
| دبوس 29 | RF3 — I/O port RF3 |
| دبوس 30 | RF2 — I/O port RF2 |
| دبوس 31 | RD15 — I/O port RD15 |
| دبوس 32 | VDD — Positive supply for digital logic |
| دبوس 33 | VSS — Digital ground |
| دبوس 34 | RD14 — I/O port RD14 |
| دبوس 35 | RD13 — I/O port RD13 |
| دبوس 36 | RD12 — I/O port RD12 |
| دبوس 37 | RD11 — I/O port RD11 |
| دبوس 38 | RD10 — I/O port RD10 |
| دبوس 39 | RD9 — I/O port RD9 |
| دبوس 40 | RD8 — I/O port RD8 |
| دبوس 41 | RD7 — I/O port RD7 |
| دبوس 42 | RD6 — I/O port RD6 |
| دبوس 43 | RD5 — I/O port RD5 |
| دبوس 44 | RD4 — I/O port RD4 |
| دبوس 45 | RD3 — I/O port RD3 |
| دبوس 46 | RD2 — I/O port RD2 |
| دبوس 47 | RD1 — I/O port RD1 |
| دبوس 48 | RD0 — I/O port RD0 |
| دبوس 49 | RC15 — I/O port RC15 |
| دبوس 50 | RC14 — I/O port RC14 |
| دبوس 51 | RC13 — I/O port RC13 |
| دبوس 52 | VSS — Digital ground |
| دبوس 53 | VDD — Positive supply for digital logic |
| دبوس 54 | RC12 — I/O port RC12 |
| دبوس 55 | RC11 — I/O port RC11 |
| دبوس 56 | RC10 — I/O port RC10 |
| دبوس 57 | RC9 — I/O port RC9 |
| دبوس 58 | RC8 — I/O port RC8 |
| دبوس 59 | RC7 — I/O port RC7 |
| دبوس 60 | RC6 — I/O port RC6 |
| دبوس 61 | RC5 — I/O port RC5 |
| دبوس 62 | RC4 — I/O port RC4 |
| دبوس 63 | RC3 — I/O port RC3 |
| دبوس 64 | RC2 — I/O port RC2 |
| دبوس 65 | RC1 — I/O port RC1 |
| دبوس 66 | RC0 — I/O port RC0 |
| دبوس 67 | AVDD — Positive supply for analog (ADC) |
| دبوس 68 | AVSS — Analog ground |
| دبوس 69 | AN15 — ADC analog input 15 |
| دبوس 70 | AN14 — ADC analog input 14 |
| دبوس 71 | AN13 — ADC analog input 13 |
| دبوس 72 | AN12 — ADC analog input 12 |
| دبوس 73 | AN11 — ADC analog input 11 |
| دبوس 74 | AN10 — ADC analog input 10 |
| دبوس 75 | AN9 — ADC analog input 9 |
| دبوس 76 | AN8 — ADC analog input 8 |
| دبوس 77 | AN7 — ADC analog input 7 |
| دبوس 78 | AN6 — ADC analog input 6 |
| دبوس 79 | AN5 — ADC analog input 5 |
| دبوس 80 | AVSS — Analog ground (also AN4/VREF-) on selected packages - confirm via datasheet |
التطبيقات النموذجية
DSPIC30F6013AT-20E/PF مناسب لـ 6 التطبيقs: Three-Phase BLDC / PMSM Motor Drive, Uninterruptible Power Supply (UPS) Controller, Solar Inverter / Power Factor Correction, Automotive Sensor Signal Conditioning, Digital Audio Effects Processing, Industrial Servo and Robotics Controller.
Three-Phase BLDC / PMSM Motor Drive
The DSPIC30F6013AT-20E/PF's 20 MIPS throughput, dedicated 16-bit Motor Control PWM with 8 outputs and programmable dead-time, and dual 40-bit accumulators make it purpose-built for sensorless and sensored FOC of three-phase BLDC and PMSM motors. The integrated quadrature encoder interface accepts Hall/ABI feedback directly, while the 12-bit ADC samples phase currents at >200 ksps for closed-loop torque control. With 132 KB Flash and 6 KB RAM, complete FOC libraries including space-vector modulation and sliding-mode observers fit on-chip. Unlike generic MCUs, the DSP MAC engine sustains field-oriented-control math at zero software overhead per the Microchip reference design DS70054.
موصى به
Uninterruptible Power Supply (UPS) Controller
The DSPIC30F6013AT-20E/PF is used as the central controller in single-phase and three-phase UPS systems, where it executes both power-factor-correction (PFC) and inverter control loops at 20 MIPS. The dual CAN peripherals enable battery-bank monitoring and grid-tie communication (e.g., Modbus over CAN), while the 12-bit ADC digitizes voltage and current waveforms at 200 ksps for RMS computation. Its extended -40C to +125C temperature range supports industrial UPS installations. The hardware MAC executes Clarke/Park transforms inline, eliminating the DSP coprocessor that competing MCUs require for similar UPS power ratings.
موصى به
Solar Inverter / Power Factor Correction
In grid-tie solar inverters, the DSPIC30F6013AT-20E/PF performs maximum power point tracking (MPPT), DC-DC converter control, and DC-AC inverter modulation. Its 16-bit PWM resolution enables high-frequency switching for compact magnetics, and the dual 40-bit accumulators execute the PI control loops for grid synchronization with sub-microsecond jitter. The 132 KB Flash holds MPPT algorithm, anti-islanding logic, and grid-fault routines per IEC 62116. Per Microchip application note AN1435, the dsPIC30F6013A is a recommended platform for sub-5 kW single-phase string inverters.
موصى به
Automotive Sensor Signal Conditioning
The DSPIC30F6013AT-20E/PF's automotive-grade temperature rating ('E' suffix: -40C to +125C) and integrated CAN bus peripherals make it suitable for in-vehicle sensor signal processing and gateway nodes. The DSP MAC computes digital filtering (FIR/IIR) on wheel-speed, throttle-position, or pressure-sensor streams faster than software-only loops on generic MCUs. Dual CAN ports allow bridging between in-cabin and powertrain CAN buses. The 12-bit ADC samples up to 16 analog channels, replacing dedicated sensor-interface ASICs in chassis and body-electronics modules.
موصى به
Digital Audio Effects Processing
Audio mixers, effects units, and digital amplifiers use the DSPIC30F6013AT-20E/PF for real-time reverb, EQ, and dynamics processing at 20 MIPS. Single-cycle 16x16 MAC with dual 40-bit accumulators implements biquad filters, FFT primitives, and look-up-delay reverb with negligible CPU overhead. The SPI peripheral interfaces directly to audio DACs/ADCs (e.g., the Microchip MCP4921/4922 family), while the 12-bit ADC can digitize line-level inputs. This avoids the need for a separate DSP chip in prosumer-grade audio products.
موصى به
Industrial Servo and Robotics Controller
Industrial servo drives, robotic arms, and CNC spindle controllers use the DSPIC30F6013AT-20E/PF as a single-chip solution for multi-axis motion control. The integrated encoder interface, 8-channel PWM, and CAN-based multi-axis networking (CiA 402 profile support) eliminate external FPGA or motion-controller ASICs. The DSP MAC computes PID + feedforward + friction-compensation at 10 kHz+ loop rates, while the 132 KB Flash accommodates trajectory planning tables for 4-6 axes. Per the Microchip dsPICworks library, the dsPIC30F6013A is the reference platform for multi-axis servo applications.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ DSPIC30F6013AT-20E/PF — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | DSPIC30F6013A-30I/PF | DSPIC30F6013A-20E/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6013A-30I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-80 (PF), 12x12 mm | TQFP-80 (PF), 12x12 mm - same | TQFP-80 (PF), 12x12 mm - same | TQFP-80 (PF), 12x12 mm - same | TQFP-80 (PF), 12x12 mm - same | TQFP-80 (PT), 10x10 mm - smaller body |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Speed | 20 MIPS (40 MHz) | 30 MIPS (+50%) | 20 MIPS | 30 MIPS (+50%) | 20 MIPS | 30 MIPS (+50%) |
| Program Memory (Flash) | 132 KB | 132 KB - same | 132 KB - same | 132 KB - same | 132 KB - same | 132 KB - same |
| Data Memory (SRAM) | 6 KB | 6 KB - same | 6 KB - same | 6 KB - same | 6 KB - same | 6 KB - same |
| EEPROM | 2 KB | 2 KB - same | 2 KB - same | 2 KB - same | 2 KB - same | 2 KB - same |
| Operating Temperature | -40C to +125C (extended 'E') | -40C to +85C (industrial 'I') | -40C to +125C (extended) - same | -40C to +85C (industrial 'I') | -40C to +85C (industrial 'I') | -40C to +85C (industrial 'I') |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V - same | 4.5 V to 5.5 V - same | 4.5 V to 5.5 V - same | 4.5 V to 5.5 V - same | 4.5 V to 5.5 V - same |
أبرز الفروقات
- Integrated DSP MAC engine eliminates external DSP chip (مقابلDSPIC30F6012AT-30I/PF (sister die with reduced peripherals))
- Extended -40C to +125C temperature range in a single part (مقابلDSPIC30F6013A-30I/PF (industrial 'I' grade))
- 132 KB Flash + 6 KB SRAM fits complete FOC + DSP algorithm library (مقابلDSPIC33EP128MC206-I/PT (newer dsPIC33E family))
ملاحظات التصميم
Decouple VDD/VSS pairs (this 80-pin) has multiple VDD and VSS pins on a TQFP-80; place a 100 nF ceramic bypass cap on each VDD/VSS pair within 3 mm of the pin. Use a 10 uF bulk cap on the main 5 V rail. The AVdd pin powering the 12-bit ADC requires a separate LC or ferrite-bead-isolated supply to reject digital switching noise; if shared with VDD, ADC accuracy degrades by 1-2 LSB. Per the Microchip dsPIC30F6013A datasheet, AVdd must equal VDD +/- 0.3 V at all times.
Route the motor-control PWM outputs (PWM1H/L through PWM4H/L) away from analog inputs (AN0-AN15) and place a ground guard trace between them. Keep the oscillator traces (OSC1/OSC2) short (<10 mm) and surround them with a ground pour. The CAN bus traces (C1TX, C1RX, C2TX, C2RX) require impedance-controlled routing per ISO 11898 (120 ohm differential) and a split termination; failure to do this results in CAN bus errors above 500 kbps.
The TQFP-80 package has a theta_JA of approximately 40-50 C/W (depending on PCB copper pour). At 20 MIPS running motor control loops with all peripherals active, the device draws about 70 mA from 5 V (350 mW). For continuous operation above 1 A PWM switching at full duty cycle with all peripherals active, ensure at least 1 sq.in. of unbroken copper pour under the IC to keep junction temperature below 125 C. Use the device's internal temperature sensor diode for software thermal monitoring.
Do not confuse the DSPIC30F6013AT-20E/PF (5 V part) with the DSPIC30F6013AT-30E/PF (3.3 V part variant in the dsPIC33F family); the latter uses different VDD spec (3.0-3.6 V) and different Flash programming voltage. Also avoid using the non-A (DSPIC30F6013, no 'A' suffix) variant as a drop-in replacement without firmware modification because the ADC architecture differs (10-bit vs 12-bit). Always verify the silicon revision in your BOM against the Microchip errata sheet DS80233.
معلومات الامتثال
RoHS compliant and lead-free per 'PF' package suffix in the Microchip ordering code. AEC-Q100 qualification status not formally listed for the dsPIC30F6013A family - for full AEC-Q100 compliance, consult Microchip's automotive-grade product catalog.
